SALEM MASTER 6220G

Download PDF
Contents

SALEM MASTER 6220G 20-Inch 62CC 2-Cycle Gas Chainsaw User Manual

Model: 6220G | Brand: SALEM MASTER

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your SALEM MASTER 6220G 20-inch 62CC 2-Cycle Gas Chainsaw. Please read this manual thoroughly before using the chainsaw to ensure proper handling and to prevent injury or damage.

The SALEM MASTER 6220G is a powerful and reliable gas-powered chainsaw designed for various tasks such as cutting firewood, felling small to medium-sized trees, and general farm, garden, and ranch use. Its ergonomic and lightweight design, combined with high performance, makes it a versatile tool.

SALEM MASTER 6220G 20-inch 62CC Gas Chainsaw

Image 1.1: The SALEM MASTER 6220G 20-inch 62CC Gas Chainsaw, ready for use.

2. Important Safety Information

WARNING: Chainsaws are dangerous tools that can cause severe injury or death if not used properly. Always follow all safety precautions.

2.1 Personal Protective Equipment (PPE)

  • Head Protection: Wear a safety helmet with a face shield or safety glasses and ear protection.
  • Eye Protection: Always wear safety glasses or goggles to protect against flying debris.
  • Ear Protection: Chainsaws produce high noise levels; wear earplugs or earmuffs.
  • Hand Protection: Wear heavy-duty work gloves for grip and protection.
  • Leg Protection: Wear chainsaw protective chaps or trousers.
  • Foot Protection: Wear steel-toed safety boots with good ankle support and non-slip soles.

2.2 General Safety Rules

  • Read and understand the entire manual before operation.
  • Never operate the chainsaw when fatigued, under the influence of alcohol, drugs, or medication.
  • Keep children, bystanders, and animals at least 50 feet (15 meters) away from the work area.
  • Inspect the chainsaw before each use for loose parts, damage, or fuel leaks.
  • Ensure the chain brake is functional.
  • Always start the chainsaw on firm ground, holding it securely.
  • Maintain a firm grip with both hands on the chainsaw handles.
  • Be aware of kickback and how to avoid it.
  • Do not overreach or cut above shoulder height.
  • Turn off the engine before refueling, cleaning, or performing maintenance.
  • Transport the chainsaw with the engine off, chain brake engaged, and guide bar covered.

3. Product Components and Features

Familiarize yourself with the various parts of your SALEM MASTER 6220G chainsaw for safe and efficient operation.

Labeled diagram of SALEM MASTER 6220G chainsaw components

Image 3.1: Key components of the SALEM MASTER 6220G chainsaw.

Key Components:

  • Front Guard: Protects the operator's hand.
  • Non-slip Handle: Provides a secure grip.
  • Starter Knob: Used to initiate engine start.
  • Air Cleaner: Filters air entering the engine.
  • Choke Knob: Used for cold starting the engine.
  • Oil Switch: Controls the flow of chain oil.
  • Trigger Lockout: Prevents accidental throttle engagement.
  • Throttle Lever: Controls engine speed.
  • Rear Handle: Main grip for operating the chainsaw.
  • Fuel Tank: Holds the gasoline-oil mixture.
  • Chain Oil Tank: Holds lubricating oil for the chain and guide bar.
  • Self-locking Mechanism: Ensures secure operation.
SALEM MASTER 6220G Chainsaw with key specifications: 62CC Engine, 20 inch Guide Bar, 3.4HP Horsepower, 2.5kW Output Power, 8500 rpm Idling Speed

Image 3.2: Overview of the SALEM MASTER 6220G's core specifications.

4. Setup and Assembly

Before operating your chainsaw, proper assembly of the guide bar and chain is crucial. Follow these steps carefully.

Step-by-step guide for chainsaw assembly: 1. Open side cover, 2. Install guide plate, 3. Install saw chain, 4. Close side cover and adjust chain tightness, 5. Lock side cover, 6. Installation complete.

Image 4.1: Visual guide for chainsaw assembly.

4.1 Assembling the Guide Bar and Chain

  1. Open the Side Cover: Locate and open the side cover of the chainsaw.
  2. Install the Guide Plate: Position the guide plate onto the mounting studs.
  3. Install the Saw Chain: Carefully place the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction (refer to the chain's directional arrows).
  4. Close the Side Cover and Adjust Chain Tightness: Reinstall the side cover. Before fully tightening, adjust the chain tension. The chain should be snug against the guide bar, but still able to be pulled around by hand. A general guideline for tightness is about 0.4-0.6 inches of play when pulled from the center of the guide bar.
  5. Lock the Side Cover: Securely tighten the nuts on the side cover to lock it in place.
  6. Verify Installation: Ensure all components are securely fastened and the chain moves freely without excessive slack or binding.

4.2 Fuel and Chain Oil

This chainsaw requires a specific fuel mixture and chain lubricating oil.

  • Fuel Mixture: Use a mixture of unleaded gasoline and 2-cycle engine oil at a ratio of 25:1 (25 parts gasoline to 1 part 2-cycle oil). Always mix fuel in a separate, approved container.
  • Chain Oil: Fill the chain oil tank with high-quality bar and chain lubricant. This system automatically supplies oil to the chain and guide bar during operation.
SALEM MASTER 6220G Chainsaw accessories including fuel mixing bottle, tools, guide bar, and chain

Image 4.2: Included accessories, including a fuel mixing bottle for proper fuel preparation.

5. Operating Instructions

5.1 Starting the Chainsaw

Follow these steps to safely start your SALEM MASTER 6220G chainsaw:

Close-up images showing chainsaw features for easy starting: Premium Chain & Guide Bar, Easily Start Switch, Quick Starting Handle, Safety Variable Trigger

Image 5.1: Features designed for easy and safe starting.

  1. Place on Firm Ground: Ensure the chainsaw is on a stable, flat surface, free from obstructions.
  2. Engage Chain Brake: Push the front guard forward to engage the chain brake.
  3. Choke: For a cold engine, pull the choke knob out. For a warm engine, the choke may not be necessary.
  4. Primer Bulb: Press the primer bulb several times until fuel is visible.
  5. Starter Knob/Pull Cord: Hold the chainsaw firmly with one hand on the front handle and pull the starter knob (pull cord) briskly until the engine fires briefly.
  6. Disengage Choke: Once the engine fires, push the choke knob in.
  7. Restart: Pull the starter knob again until the engine starts and runs.
  8. Warm-up: Allow the engine to warm up for a few moments before engaging the throttle.
  9. Disengage Chain Brake: Pull the front guard back to disengage the chain brake before cutting.

5.2 Cutting Techniques

  • Always maintain a balanced stance and firm grip on both handles.
  • Never cut with the tip of the guide bar to avoid kickback.
  • Plan your cuts to ensure the wood falls safely and away from you.
  • Be aware of pinching hazards when cutting logs under tension.
  • Use the bumper spike (if equipped) to pivot the chainsaw for more controlled cuts.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your chainsaw.

6.1 Daily Maintenance

  • Clean Air Filter: The air filter has a quick-release mechanism for easy cleaning. Clean or replace as needed to maintain engine performance.
  • Check Chain Tension: Ensure the chain tension is correct before each use.
  • Check Chain Sharpness: A dull chain requires more effort and increases kickback risk. Sharpen or replace the chain as necessary.
  • Inspect Guide Bar: Check for wear, burrs, or damage.
  • Check Oil Levels: Ensure both fuel and chain oil tanks are adequately filled.

6.2 Periodic Maintenance

  • Spark Plug: Inspect and clean or replace the spark plug periodically.
  • Fuel Filter: Check and clean or replace the fuel filter.
  • Cooling Fins: Keep engine cooling fins clean to prevent overheating.
  • General Cleaning: Clean the entire chainsaw, removing sawdust and debris from all moving parts.

7. Troubleshooting

This section addresses common issues you might encounter with your chainsaw.

ProblemPossible CauseSolution
Engine does not startNo fuel, incorrect choke setting, fouled spark plug, clogged fuel filter.Check fuel level and mixture, adjust choke, clean/replace spark plug, clean/replace fuel filter.
Engine starts but stallsIncorrect fuel mixture, clogged air filter, carburetor issues.Verify fuel mixture, clean air filter, consult a service technician for carburetor adjustment.
Chain does not cut efficientlyDull chain, incorrect chain tension, guide bar wear.Sharpen or replace chain, adjust chain tension, inspect/replace guide bar.
No chain oil flowEmpty oil tank, clogged oil port, faulty oil pump.Fill oil tank, clean oil port, consult service technician.

8. Product Specifications

FeatureSpecification
BrandSALEM MASTER
Model6220G (20IN-6220G2)
Engine Type62CC 2-Cycle Gas Engine
Guide Bar Length20 inches
Engine SpeedUp to 8500 rpm
Fuel Mixture Ratio25:1 (Gasoline:2-Cycle Oil)
Item Weight18.76 pounds
Product Dimensions20 x 10 x 10 inches
UPC810147641376

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact SALEM MASTER customer support directly. Keep your proof of purchase for any warranty claims.

If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact SALEM MASTER customer service. Contact details can typically be found on the product packaging or the official SALEM MASTER website.

Online Resources:

© 2025 SALEM MASTER. All rights reserved.

This manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.