LMRSTOO Queen

Download PDF
Contents

LMRSTOO Queen Deluxe Murphy Bed Hardware Kit Instruction Manual

Brand: LMRSTOO | Model: Queen

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your LMRSTOO Queen Deluxe Murphy Bed Hardware Kit. Please read all instructions carefully before beginning assembly to ensure proper installation and safe use of the product. This kit is designed for individuals with DIY experience.

Safety Information

Warning: Do not exceed the weight limit of 900 lbs. Follow the detailed assembly instructions carefully to ensure safe installation. Keep the area around the bed clear to prevent tip-over risks. Keep small children and pets away from the assembly area during installation and operation.

Package Contents

Please verify that all components listed below are present in your package. If any parts are missing or damaged, contact customer support immediately.

  • 2 x Curved Steel Bed Legs (Supports)
  • 2 x Hydraulic Gas Struts (Air Rods)
  • 4 x Mounting Plates (for Struts - 2 long spindle, 2 short spindle)
  • 4 x Mounting Plates (for Legs)
  • Assorted Screws and Fasteners
  • 1 x Mattress Securing Strap
  • 1 x Small Screwdriver
  • Plastic Caps/Bushings
All components of the LMRSTOO Murphy Bed Hardware Kit, including two curved steel legs, two hydraulic gas struts, various mounting plates, screws, a strap, and a screwdriver.

Image: Overview of all hardware components included in the kit.

Setup and Assembly

This hardware kit is designed for individuals with DIY experience. Detailed visual instructions, including a paper manual, online PDF, and online video, are available. For the PDF or video instructions, please contact LMRSTOO customer support.

Required Tools (Not Included):

  • Drill
  • Measuring Tape
  • Level
  • Pencil
  • Safety Glasses

Assembly Steps:

  1. Prepare Your Workspace: Ensure a clear, well-lit area. Gather all necessary tools and components.
  2. Identify Components: Refer to the 'Package Contents' section and provided images to identify each part.
  3. Install Mounting Plates for Struts: Attach the long spindle mounting plates to the upper part of your custom bed frame structure and the short spindle mounting plates to the lower part. Ensure they are securely fastened and level.
Diagram showing the connection points for the long and short spindles of the Murphy bed hardware kit. The long spindle connects to the upper part of the air rod, and the short spindle connects to the lower part of the pistons.

Image: Installation details for connecting the hydraulic struts to the bed frame using long and short spindles.

  1. Attach Hydraulic Struts: Connect the hydraulic gas struts to the installed mounting plates. The long spindle connects to the upper end of the air rod, and the short spindle connects to the lower end of the piston. Ensure a secure connection.
  2. Install Bed Legs: Secure the curved steel legs to the bed frame. These legs provide support when the bed is in the lowered position.
Two curved black steel legs for the Murphy bed hardware kit, with a green icon indicating a 900 lbs load capacity. These legs provide robust support for the bed when extended.

Image: The robust steel legs designed to support up to 900 lbs.

  1. Secure Mattress: Once the bed frame is fully assembled and installed, use the provided strap to secure your mattress to the frame. This prevents the mattress from shifting when the bed is raised.
A partially assembled Murphy bed frame with a mattress, shown in a room setting. The image illustrates the product's suitability for Queen, King, and Full size mattresses.

Image: Example of a Murphy bed frame with mattress, demonstrating the product's application.

Operating Instructions

The LMRSTOO Murphy Bed Hardware Kit allows for easy conversion of your bed between a sleeping and a space-saving upright position.

To Lower the Bed:

  1. Ensure the area around the bed is clear of obstructions.
  2. Gently pull the bed frame downwards from the top edge. The hydraulic struts will assist in controlling the descent.
  3. Guide the bed until it is fully horizontal and the support legs are extended and stable on the floor.

To Raise the Bed:

  1. Remove any bedding or pillows that might obstruct the bed's movement.
  2. Lift the bed frame from the bottom edge. The hydraulic struts will assist in lifting the bed.
  3. Continue lifting until the bed is in a fully vertical position and securely stored against the wall. Ensure any locking mechanism (if part of your custom frame) is engaged.
A room with a Murphy bed in the lowered position, integrated into a wall unit. The image also shows the individual hardware components: short spindle connecting to the lower part of pistons and long spindle connecting to the upper part of the air rod.

Image: Usage scenario showing a Murphy bed in a room, alongside a diagram of spindle connections.

Maintenance

Regular maintenance ensures the longevity and safe operation of your Murphy bed hardware.

  • Inspect Fasteners: Periodically check all screws and bolts for tightness. Tighten any loose fasteners to prevent instability.
  • Check Hydraulic Struts: Inspect the gas struts for smooth operation, signs of leakage, or damage. If a strut appears faulty, contact customer support for replacement.
  • Clean Components: Wipe down steel components with a dry or slightly damp cloth to prevent dust buildup and rust. Avoid harsh chemicals.
  • Clear Obstructions: Ensure the area around the bed's moving parts is free from any obstructions that could impede its operation.

Troubleshooting

If you encounter issues with your LMRSTOO Murphy Bed Hardware Kit, refer to the following common problems and solutions:

  • Problem: Bed does not stay in the upright position or is difficult to lift/lower.
    Solution:
    • Verify that the hydraulic struts are installed correctly, with the long spindle connected to the upper part of the air rod and the short spindle to the lower part of the pistons.
    • Check if the struts are damaged or stuck. If they are defective, contact customer support for replacement.
    • Ensure the weight of your bed frame and mattress does not exceed the 900 lbs capacity.
  • Problem: Bed frame components (e.g., legs, hinges) are bending or breaking.
    Solution:
    • Confirm proper installation and alignment of all hardware components according to the instructions.
    • Ensure the custom bed frame you built is structurally sound and compatible with the hardware.
    • Do not exceed the specified weight capacity of 900 lbs.
  • Problem: Missing or unclear assembly instructions.
    Solution:
    • Contact LMRSTOO customer support for the official PDF or video instructions.

Specifications

Size CompatibilityQueen (U.S. Standard), also suitable for Full and King sizes with appropriate frame construction
Product Dimensions (Hardware Kit)23.62"L x 9.25"W x 2.76"H
Special FeatureAdjustable
ColorBlack
Finish TypeLacquered
Item Weight (Hardware Kit)8.8 pounds
Load Capacity (Legs)Up to 900 lbs
MaterialCarbon Steel
Assembly RequiredYes

Warranty Information

For specific warranty details and to make a warranty claim, please contact LMRSTOO customer support directly. It is recommended to retain your purchase receipt as proof of purchase.

Support

If you have any questions, require further assistance, or need to report a problem, please contact LMRSTOO customer service. You can typically reach them through the retailer where you purchased the product or by visiting the official LMRSTOO store page on Amazon: LMRSTOO Store.

© 2025 LMRSTOO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.