Product Overview
The AIKE Wall Mount Liquid Soap Dispenser AK1007 is designed for efficient and hygienic soap dispensing in various environments, including commercial bathrooms, offices, and restaurants. Constructed from durable ABS material, this dispenser features a large 40 oz (1200 ml) capacity, reducing the frequency of refills. Its design incorporates a transparent window to monitor soap levels and a secure locking mechanism to prevent tampering.
Image: The AIKE AK1007 Liquid Soap Dispenser installed in a commercial bathroom, alongside a paper towel dispenser, showcasing its sleek design in a functional setting.
Product Features
- Large Capacity: Holds 40 oz (1200 ml) of liquid soap, minimizing refill frequency.
- Durable Construction: Made from sturdy ABS material for long-lasting use.
- Transparent Window: Allows for easy monitoring of soap levels.
- Secure Locking Mechanism: Helps prevent vandalism and unauthorized access to the soap reservoir.
- Easy Dispensing: Features a large push button for convenient soap delivery.
- Versatile Installation: Supports both adhesive and screw mounting options.
Image: A visual breakdown of the dispenser's key features, including its robust ABS plastic construction, transparent soap reservoir, key-operated locking system, and the design of its mounting plate.
Setup and Installation
The AIKE AK1007 dispenser offers two installation methods: drill-free adhesive mounting or secure screw mounting. Choose the method best suited for your wall surface and desired permanence.
Installation Steps:
- Prepare the Wall: Clean and dry the wall surface thoroughly where the dispenser will be mounted. Ensure it is free from dust, grease, or moisture for optimal adhesion.
- Mark Position: Use a level and pencil to mark the desired installation height and alignment for the mounting plate.
- Attach Mounting Plate:
- For Adhesive Mounting: Apply the provided nail-free glue evenly to the back of the mounting plate. Press the plate firmly against the marked wall position and hold for a few seconds. Allow 48 hours for the adhesive to fully cure before hanging the dispenser.
- For Screw Mounting: Drill holes (6mm diameter) at the marked positions. Insert the expansion anchors into the drilled holes. Align the mounting plate with the anchors and secure it with the provided screws.
- Hang the Dispenser: Once the mounting plate is securely attached (after 48 hours for adhesive, or immediately for screws), carefully hang the dispenser onto the mounting plate.
- Secure with Safety Screw (for Screw Mounting): Insert and tighten the safety screw at the bottom of the dispenser to prevent accidental removal.
- Install Batteries (if applicable for automatic models, though AK1007 is manual): For models requiring batteries, insert 4 AA batteries into the designated compartment. Avoid using rechargeable batteries as they may cause improper operation.
Image: A visual guide illustrating the installation process, from unlocking the dispenser and removing the backplate to drilling holes, inserting anchors and screws, and finally securing the mounting plate to the wall.
Operation
To dispense soap, simply place your hand under the dispenser and press the large 'PUSH' button located at the bottom. The dispenser is designed to provide a consistent flow of liquid soap with each press.
Image: A hand demonstrating the easy push operation of the dispenser, showing soap being dispensed into the palm.
Maintenance
Refilling the Dispenser:
- Use the provided key to unlock the top cover of the dispenser.
- Lift the cover to access the internal reservoir.
- Pour liquid soap directly into the wide opening of the reservoir. Avoid overfilling.
- Close the top cover and lock it securely with the key.
Image: The dispenser being refilled with liquid soap, highlighting its wide opening for easy pouring and its 40 oz capacity.
Cleaning:
Regularly wipe the exterior of the dispenser with a soft, damp cloth and mild soap to maintain its appearance. Do not use abrasive cleaners or solvents. For internal cleaning, empty the reservoir, rinse with warm water, and allow to air dry before refilling.
Troubleshooting
- No Soap Dispensing:
- Check if the reservoir is empty and refill if necessary.
- Ensure the pump mechanism is not clogged. If clogged, try flushing with warm water.
- Leaking:
- Verify that the top cover is securely closed and locked.
- Ensure the dispenser is not overfilled.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | AK1007 |
| Brand | AIKE |
| Color | Black |
| Material | Plastic (ABS) |
| Liquid Volume | 1200 Milliliters (40 oz) |
| Product Dimensions | 4.92"L x 3.74"W x 9.06"H |
| Item Weight | 1.41 pounds |
| Mounting Type | Wall Mount (Screw or Adhesive) |
Image: The physical dimensions of the dispenser are shown, along with a visual representation of the included installation accessories.
Warranty and Support
The AIKE Wall Mount Liquid Soap Dispenser AK1007 comes with a one-year manufacturing warranty. For any support inquiries or assistance, please contact AIKE customer service via Amazon message or through their official support email. Your experience with AIKE products is valued.
