Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FiveWillowise Fluted Cabinet with Storage. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1: The FiveWillowise Fluted Cabinet with Storage, showcasing its elegant design and natural finish.
Safety Information
- Anti-tip Mechanism: Ensure the anti-tip mechanism is properly installed and engaged to prevent the cabinet from tipping over. This is crucial for safety, especially in households with children or pets.
- Weight Limit: Do not exceed the maximum weight limit of 80 lbs for the tabletop and 30 lbs per storage shelf. Overloading can compromise stability and cause damage.
- Assembly: Assemble the unit on a soft, clean surface to prevent scratches. Ensure all screws and fasteners are securely tightened before use.
- Placement: Place the cabinet on a level surface to ensure stability. Avoid placing it in areas with excessive moisture or direct sunlight to prevent material degradation.
Package Contents
Before assembly, verify that all components and hardware are present and undamaged. Refer to the included parts list in your physical manual for specific item codes. The cabinet includes:
- Cabinet panels (top, bottom, sides, back, doors, shelves)
- Solid wood legs
- Black metal handles
- Assembly hardware (screws, hinges, anti-tip kit)

Figure 2: Product dimensions and material overview.
Assembly Instructions
Follow these steps for proper assembly. It is recommended to have a second person assist with certain steps for ease and safety.
- Prepare the Base: Attach the solid wood legs to the bottom panel of the cabinet using the provided hardware. Ensure they are securely fastened.
- Assemble the Frame: Connect the side panels to the bottom and top panels. Use the designated screws and dowels to ensure a sturdy frame.
- Install Back Panel: Slide the back panel into the grooves on the side and top/bottom panels. Secure it with the small nails or screws provided.
- Attach Hinges to Doors: Secure the hinges to the cabinet doors. Note the unique waveform fluted design on the doors.
- Mount Doors to Cabinet: Attach the doors to the cabinet frame using the pre-drilled holes. Ensure the doors open and close smoothly.
- Install Handles: Attach the black metal handles to the doors.
- Insert Adjustable Shelves: Place the adjustable shelves at your desired height. The shelves can be adjusted in 3 heights, each with a 2-inch difference.
- Install Anti-Tip Mechanism: Securely attach the anti-tip mechanism to the back of the cabinet and to the wall, following the specific instructions provided with the kit.

Figure 3: Detail of the elegant waveform fluted door design.

Figure 4: Key features including metal handles, premium MDF board, and solid wood legs.

Figure 5: The cabinet interior with adjustable shelves, demonstrating storage flexibility.
Assembly Video Guide
Video 1: An official FiveWillowise video demonstrating the assembly process and key features of the 2-door fluted sideboard buffet.
Operating Instructions
- Opening/Closing Doors: Gently pull the black metal handles to open the doors. The doors are designed to close quietly.
- Adjusting Shelves: To adjust the height of the interior shelves, remove all items from the shelf. Lift the shelf and reposition the shelf pins into the desired pre-drilled holes. Ensure all four pins are securely in place before placing items back on the shelf.
Maintenance and Care
- Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or water damage to the MDF board.
- Protection: Use coasters or placemats under hot or wet items placed on the tabletop to protect the surface.
- Regular Checks: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
- Door Gaps or Non-Alignment: If the cabinet doors appear uneven or have large gaps, adjustments can be made to the hinges. Refer to the troubleshooting video for detailed instructions on how to adjust the hinges for proper alignment.
- Wobbly Cabinet: Ensure the cabinet is placed on a flat, level surface. Check that all leg and frame screws are securely tightened.
Door Adjustment Video Guide
Video 2: An official FiveWillowise video providing solutions for two-door gaps or non-alignment issues, demonstrating hinge adjustments.
Specifications
| Brand | FiveWillowise |
| Model | 2 Doors - 15.7"D x 31.5"W x 31.5"H |
| Color | Natural |
| Product Dimensions | 15.7"D x 31.5"W x 31.5"H |
| Material | Engineered Wood (MDF) |
| Weight Limit (Top) | 80 Pounds |
| Number of Doors | 2 |
| Number of Shelves | 2 (adjustable) |
| Assembly Required | Yes |
Warranty and Support
FiveWillowise products are designed for quality and durability. For any questions, concerns, or to report missing or damaged parts, please contact FiveWillowise customer support. Refer to your purchase documentation or the manufacturer's website for specific warranty details and contact information. Our professional team is committed to resolving all issues within 24 hours.





