KAWADA NAN23331

Download PDF
Contents

KAWADA nanoblock Dragon Ball Super Ultra Instinct Son Goku Building Kit Instruction Manual

Model: NAN23331 | Brand: KAWADA

Introduction

This instruction manual provides detailed guidance for assembling and maintaining your KAWADA nanoblock Dragon Ball Super Ultra Instinct Son Goku Character Collection Series Building Kit. This kit allows you to construct a miniature replica of Ultra Instinct Son Goku using nanoblocks, offering a challenging yet rewarding building experience. The finished model stands approximately 2.44 inches tall and consists of 160 pieces, with a difficulty level of 3.

Assembled nanoblock Ultra Instinct Son Goku figure

Image: The fully assembled nanoblock Ultra Instinct Son Goku figure, showcasing its detailed design and compact size.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

Please keep all nanoblock pieces and packaging away from young children to prevent accidental ingestion. Adult supervision is recommended during assembly, especially for younger builders.

What's in the Box

Upon opening your nanoblock kit, you should find the following components:

  • Dragon Ball Super - Ultra Instinct Son Goku Character Collection Series nanoblock pieces (approximately 160 pieces)
  • Instruction sheet with detailed assembly diagrams
Nanoblock Ultra Instinct Son Goku figure held in a hand, showing its small scale

Image: The nanoblock Ultra Instinct Son Goku figure resting in the palm of a hand, illustrating the miniature scale of the completed model.

Assembly Instructions

The nanoblock Ultra Instinct Son Goku kit has a difficulty level of 3. Follow the numbered steps and diagrams provided in the included instruction sheet carefully. It is recommended to sort the pieces by color and shape before beginning assembly.

  1. Preparation: Open the packaging and carefully empty all nanoblock pieces onto a clean, flat surface. It is helpful to use small containers to sort pieces by color or size.
  2. Follow Diagrams: Refer to the step-by-step diagrams in the instruction sheet. Each step will show which blocks to add and where. Pay close attention to the orientation of each block.
  3. Layer by Layer: Nanoblock models are typically built layer by layer from the base upwards. Ensure each block is firmly pressed into place to create a stable structure.
  4. Small Pieces: Some pieces are very small. Using tweezers (not included) can assist in placing them accurately.
  5. Review Each Step: Before moving to the next step, double-check that all blocks from the current step are correctly placed.
Example of nanoblock assembly steps with numbered diagrams

Image: An illustrative example of nanoblock assembly, showing a sequence of numbered steps to guide the building process.

The kit includes extra blocks. These are provided as spares for small pieces that may be easily lost or for minor modifications if desired.

Display and Care

Once assembled, your Ultra Instinct Son Goku nanoblock model is ready for display. Place it on a stable, flat surface away from direct sunlight and excessive heat to prevent material degradation.

Three nanoblock Dragon Ball figures, including Ultra Instinct Son Goku, displayed on a shelf

Image: Three nanoblock Dragon Ball figures, including the Ultra Instinct Son Goku model, arranged on a display shelf alongside other decorative items.

Maintenance

To keep your nanoblock model clean, gently dust it with a soft, dry brush or a can of compressed air. Avoid using water or chemical cleaners, as these may damage the plastic or cause colors to fade.

Troubleshooting

  • Loose Blocks: If some blocks feel loose, ensure they are fully pressed down. The kit includes extra blocks, which can be used to replace any pieces that do not fit securely.
  • Missing Pieces: Carefully re-check the packaging and your work area. If a piece is genuinely missing, contact KAWADA customer support.
  • Difficulty with Assembly: Refer back to the instruction diagrams. Sometimes taking a short break and returning to the assembly can help identify missed steps or incorrect placements.

Specifications

Product Dimensions2.5 x 2.5 x 2.5 inches
Item Model NumberNAN23331
Material TypePlastic
Target GenderUnisex
Number Of Items1
Item Weight0.317 ounces
Batteries RequiredNo

Warranty and Support

For any inquiries regarding your nanoblock product, please refer to the official KAWADA nanoblock website or contact their customer support directly. As an officially licensed product, it adheres to the quality standards of Bandai Namco.

Visit the KAWADA Store on Amazon for more information and other nanoblock products.

© 2025 KAWADA. All rights reserved. Dragon Ball Super is a trademark of its respective owners.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.