nanoblock Pokémon Tandemaus RS Series Building Kit

1. Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

This product contains very small building blocks. Keep all components out of reach of young children to prevent accidental ingestion.

Recommended age for assembly is 12 years and up.

2. Package Contents

Before beginning assembly, please verify that all components are present. The kit includes:

• nanoblock pieces for Tandemaus RS (approximately 370 pieces)
• Detailed instruction manual for assembly

Image: The nanoblock Pokémon Tandemaus RS Series product box, showing the assembled figures and piece count.

If any pieces are missing, please contact nanoblock customer support for assistance. Contact information is typically found on the product packaging or the official nanoblock website.

3. Assembly Instructions

The nanoblock Tandemaus RS Building Kit requires careful assembly following the included step-by-step instructions. Due to the micro-sized nature of nanoblocks, precision is key.

1. Unpack Components: Carefully open the packaging and separate the nanoblock pieces. It is recommended to work on a clean, flat surface to prevent loss of small parts.
2. Refer to Included Manual: Follow the specific assembly diagrams and instructions provided in the physical manual included within the product box. These instructions detail the exact placement of each block.
3. Layer by Layer: nanoblock models are typically built layer by layer. Ensure each block is firmly connected to the previous layer before proceeding.
4. Patience is Key: Building nanoblock models can be intricate. Take your time and double-check each step.

Image: Two assembled nanoblock Tandemaus figures, showcasing the final product.

Image: A closer view of the two assembled nanoblock Tandemaus figures, showing their connected tails.

The difficulty level for this kit is rated as 3 out of 5, indicating a moderate challenge suitable for experienced builders or those seeking a rewarding project.

Image: A visual representation of nanoblock difficulty levels, ranging from 1 to 5.

4. Care and Maintenance

• Cleaning: To clean your assembled nanoblock model, gently wipe it with a dry, soft cloth. For more stubborn dust, a soft brush or compressed air can be used. Avoid using water or chemical cleaners, as these may damage the blocks.
• Storage: Store the assembled model or loose blocks in a cool, dry place away from direct sunlight to prevent discoloration or warping. Keep blocks in a sealed container if not assembled to prevent loss.
• Handling: Handle the assembled model with care. While nanoblocks connect securely, excessive force or dropping may cause parts to detach.

5. Troubleshooting

• Missing Pieces: If you discover missing pieces during assembly, first double-check the packaging and your work area. Small pieces can easily be overlooked. If pieces are genuinely missing, contact nanoblock customer support for replacement parts.
• Difficulty with Assembly: If you find a step particularly challenging, review the instruction manual carefully. Sometimes, rotating the model or viewing the diagram from a different angle can help clarify the placement. Ensure blocks are fully pressed into place.
• Loose Connections: Ensure each nanoblock is pressed firmly onto the studs of the blocks below it. A slight click indicates a secure connection.

6. Specifications

Image: A nanoblock piece shown on a fingertip, illustrating its small size and dimensions (4mm x 4mm x 5mm).

7. Warranty and Support

Information regarding product warranty and direct customer support contacts is typically provided within the product packaging or on the official nanoblock website. Please refer to those resources for the most current details.

For general inquiries or to report missing parts, please visit the official nanoblock website or contact their customer service department.