Introduction
Thank you for choosing the ErGear EGESD65W Electric Standing Desk. This manual provides detailed instructions for the assembly, operation, and maintenance of your new desk. Designed for both home and office use, this adjustable standing desk promotes a healthier and more productive work environment by allowing you to effortlessly switch between sitting and standing positions. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Keep children and pets away from the desk during operation to prevent injury from moving parts.
- Do not overload the desk. Refer to the 'Specifications' section for maximum weight capacity.
- Ensure the power cord is properly connected and routed to avoid tripping hazards or damage.
- Do not place liquids directly on the control panel or motor components.
- Only use the desk for its intended purpose as a workstation.
Package Contents
Please verify that all the following components are included in your package:
- One-Piece Desktop (48x30 inch)
- Electric Lifting Columns (Legs)
- Control Panel with Digital Display
- Cable Management Tray
- Power Adapter and Cable
- Assembly Hardware Kit (screws, tools)
- Instruction Manual
Setup and Assembly
The ErGear EGESD65W features a one-piece desktop for simplified and faster installation. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Lifting Columns: Secure the electric lifting columns (legs) to the underside of the one-piece desktop using the provided screws. Ensure they are aligned correctly with the pre-drilled holes.
- Install Control Panel: Mount the control panel to the designated area on the front edge of the desktop.
- Connect Cables: Connect the motor cables from the lifting columns to the control box, and then connect the control panel cable to the control box. Finally, connect the power adapter to the control box.
- Attach Cable Management Tray: Install the cable management tray to the underside of the desktop as shown in the diagram, providing a neat solution for your power and data cables.
- Position Desk: Carefully flip the desk upright and place it in your desired location. Ensure there is enough clearance for height adjustments.
Operating Instructions
Your ErGear standing desk is equipped with an intuitive control panel for easy height adjustment and memory presets.
Control Panel Functions:
- Up/Down Arrows (▲ / ▼): Press and hold to continuously adjust the desk height up or down. Release to stop at your desired height.
- Memory Presets (1, 2, 3, 4): Press a numbered button to move the desk to a pre-saved height. To save a height, adjust the desk to the desired position, then press the 'M' button followed by the desired number (1-4). The display will show 'S-' then the number to confirm.
- Display: Shows the current height of the desk in inches.
Maintenance
Regular maintenance ensures the longevity and smooth operation of your ErGear standing desk.
- Cleaning: Wipe the desktop and legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cable Management: Periodically check the cable management tray and ensure all cables are neatly organized and not pinched or tangled.
- Screw Tightness: Over time, screws may loosen. Periodically check and tighten all assembly screws to maintain stability.
- Motor Inspection: Ensure the motor and lifting columns are free from obstructions. Do not attempt to lubricate or disassemble the motor components.
Troubleshooting
If you encounter any issues with your ErGear standing desk, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cord disconnected; Motor cable loose; Overload. | Check power connection; Ensure all cables are securely plugged in; Reduce weight on desk. |
| Desk moves unevenly. | Uneven weight distribution; Loose screws. | Distribute weight evenly; Tighten all assembly screws. |
| Display shows an error code. | System malfunction; Overheating. | Unplug the desk for 10 minutes, then plug back in. If error persists, contact customer support. |
| Desk makes unusual noise. | Obstruction in lifting mechanism; Loose components. | Check for obstructions under the desk; Tighten screws. |
If the problem persists after attempting these solutions, please contact ErGear customer support for further assistance.
Specifications
Key technical details for your ErGear EGESD65W Standing Desk:
- Model Number: EGESD65W-US
- Desktop Dimensions: 48 x 30 inches
- Adjustable Height Range: Approximately 28 to 47 inches (71.1 cm to 119.4 cm)
- Desktop Material: Bamboo
- Leg Material: Stainless Steel
- Color: White
- Included Components: Cable Management Tray
- Assembly Required: Yes
- Operation: Electric
Warranty and Support
Your ErGear EGESD65W Electric Standing Desk comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official ErGear website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ErGear customer service through the contact information provided on the official ErGear website or your purchase platform. Please have your model number (EGESD65W-US) and purchase date ready when contacting support.
