OLIGHT Ostation X NiMH AAA Rechargeable Battery Charger User Manual

1. Introduction

The OLIGHT Ostation X is an advanced 3-in-1 automatic battery charger designed exclusively for NiMH AAA rechargeable batteries. It integrates charging, testing, and storage functionalities into a single device, simplifying battery management. This manual provides essential information for the safe and efficient operation of your Ostation X.

Figure 1: OLIGHT Ostation X Battery Charger

Key Features:

• Smart Battery Detection: Automatically detects battery type (NiMH AAA), polarity, and health status. No manual polarity checking is required.
• Dual Charging Modes: Offers both standard (3.8-hour) and fast (2.5-hour) charging options.
• Integrated Storage: Provides storage capacity for up to 36 batteries, automatically queuing them for charging and storing them once fully charged.
• App Control & Monitoring: Connects via Bluetooth to the Olight app for real-time monitoring of charging progress, battery health, and firmware updates.
• Bad Battery Detection: Identifies and separates incompatible or faulty batteries into a dedicated bin.

2. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

• OLIGHT Ostation X Battery Charger
• 1 x 4.92 ft (1.5 m) USB-C to USB-C Cable
• User Manual (this document)

Note: AAA batteries are not included and must be purchased separately.

3. Setup

3.1 Unpacking and Placement

1. Carefully remove the Ostation X from its packaging.
2. Place the device on a stable, flat surface away from direct sunlight, heat sources, and moisture. Ensure adequate ventilation around the unit.

3.2 Power Connection

1. Connect the provided USB-C to USB-C cable to the USB-C input port on the Ostation X.
2. Connect the other end of the USB-C cable to a PD-compatible charger that outputs at least 12V & 1.5A. Using an incompatible adapter may prevent the device from functioning, and the indicator light may turn yellow.

Figure 2: Ensure your power adapter meets the 12V & 1.5A requirement.

3.3 App Installation and Firmware Update

For the best user experience and to access all features, it is recommended to download the Olight app and update the Ostation X firmware immediately after setup.

1. Download the official Olight app from your smartphone's app store.
2. Open the app and follow the on-screen instructions to connect your Ostation X via Bluetooth.
3. Check for and install any available firmware updates for the device through the app.

4. Operating Instructions

4.1 Loading Batteries

The Ostation X features an innovative waterfall charging design that simplifies battery loading.

1. Open the top cover of the Ostation X.
2. Drop NiMH AAA rechargeable batteries into the top hopper. You can load up to 36 batteries at once. The device automatically detects polarity, so there is no need to orient the batteries in a specific direction.
3. Close the top cover. The Ostation X will begin processing the batteries.

Figure 3: Drop batteries into the top, the Ostation X handles the rest.

Figure 4: No need to check positive/negative polarity when loading batteries.

4.2 Automatic Processing

The Ostation X automatically analyzes, charges, and sorts batteries.

• Detection: The device intelligently detects good or bad batteries. Incompatible or faulty batteries will be sorted into a separate invalid battery bin.
• Charging: Healthy batteries are automatically queued for charging. The device charges up to 4 cells per round.
• Storage: Once fully charged, batteries are automatically moved to the storage compartment at the bottom, ready for use.

Figure 5: The Ostation X automatically sorts good batteries from incompatible/bad ones.

4.3 Retrieving Charged Batteries

To retrieve charged batteries from the storage compartment:

1. Gently press down on the dispensing lever located at the bottom front of the device.
2. A charged battery will be dispensed.

Figure 6: Press the lever to dispense a charged battery.

4.4 App Control and Monitoring

The Olight app provides comprehensive control and monitoring capabilities:

• Turn On/Off: Remotely control the device's power.
• Battery Status: View the charging progress and health of individual batteries.
• Charging Modes: Select between standard (3.8 hours) and fast (2.5 hours) charging modes.
• Charged Cells Count: Track the number of batteries that have been fully charged.
• Paused Charging Schedule: Set specific times for the device to pause charging, useful for quiet hours.
• OTA Upgrades: Receive and install over-the-air firmware updates.

Figure 7: Monitor and control your Ostation X via the Olight app.

4.5 Indicator Light Meanings

The LED indicator ring on the Ostation X displays different colors to communicate the device's current status:

• White: Ready for loading cells.
• Green: Preparing for charging.
• Blue: Charging in progress.
• Red: Malfunction detected.
• Yellow: Incompatible adapter detected.

Figure 8: Understand the status of your Ostation X through its LED indicator.

5. Maintenance

5.1 Cleaning

• Ensure the device is unplugged before cleaning.
• Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• If batteries are rejected due to dirty or corroded surfaces, clean the battery contacts before re-inserting them.

5.2 Storage

• When not in use for extended periods, store the Ostation X in a cool, dry place.
• The device is designed for long-term battery storage, keeping charged batteries ready.

6. Troubleshooting

7. Specifications

8. Product Videos

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official OLIGHT website or contact OLIGHT customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

OLIGHT Official Website: www.olightstore.com