1. Introduction
This user manual provides comprehensive instructions for the Bewinner Over-Ear Stereo Headphones, Model Bewinnerf4wicg2ap6-12. Please read this manual carefully before using the product to ensure proper operation and to maximize your listening experience. Keep this manual for future reference.
2. Product Overview
2.1 Package Contents
Upon unpacking, please ensure all items listed below are present:
- Bewinner Over-Ear Stereo Headphones
- USB Charging Cable
- 3.5mm Audio Cable
- User Manual (this document)
2.2 Key Features
- Advanced Bluetooth 5.3 Connectivity: Offers stable and low-latency wireless connection up to 10 meters.
- Impressive Sound Quality: Equipped with 40mm speakers and a frequency range of 20Hz-20KHz for rich audio.
- Dual Mode Use: Supports both wireless (Bluetooth) and wired (3.5mm audio cable) connections.
- Long Battery Life: Built-in 200mAh lithium-ion battery for extended playback.
- Memory Card Support: Integrated slot for up to 32GB memory card (not included) for direct music playback.
- Comfortable Design: Lightweight ABS material for comfortable wear during extended use.
2.3 Headphone Diagram
Familiarize yourself with the various parts and controls of your headphones.

Figure 1: Bewinner Over-Ear Stereo Headphones (Khaki)
This image displays the overall design of the Bewinner Over-Ear Stereo Headphones in Khaki, highlighting the earcups and adjustable headband.

Figure 2: Control Panel and Ports
A detailed view of the headphone earcup, illustrating the location of the 3.5mm audio input, the charging port, and the memory card slot for direct media playback.
3. Setup
3.1 Charging the Headphones
- Connect the provided USB charging cable to the charging port on the headphones.
- Connect the other end of the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light will illuminate during charging and turn off or change color when fully charged.
- A full charge typically takes approximately 2-3 hours.
3.2 Powering On/Off
- To Power On: Press and hold the Power button (usually indicated by a power icon) for approximately 3-5 seconds until an indicator light flashes or an audible prompt is heard.
- To Power Off: Press and hold the Power button again for approximately 3-5 seconds until the indicator light turns off or an audible prompt is heard.
3.3 Pairing via Bluetooth 5.3 (Wireless Mode)
- Ensure the headphones are powered off.
- Press and hold the Power button until the indicator light flashes rapidly (often blue and red alternately), indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Bewinnerf4wicg2ap6-12" (or similar name) from the list of found devices.
- Once paired, the indicator light will typically flash slowly or turn solid blue, and an audible confirmation may be heard.
3.4 Using 3.5mm Audio Cable (Wired Mode)
- Insert one end of the 3.5mm audio cable into the audio input jack on the headphones.
- Insert the other end into the 3.5mm audio output jack of your audio source device.
- The headphones will automatically switch to wired mode. No power is required for basic audio playback in wired mode, though some functions may be limited.
3.5 Inserting a Memory Card
- Locate the memory card slot on the headphone earcup.
- Gently insert a compatible memory card (up to 32GB, not included) into the slot until it clicks into place. Ensure the card is oriented correctly.
- The headphones will automatically detect the memory card and may begin playing audio files stored on it.
4. Operating Instructions
The headphones feature intuitive controls for managing audio playback and calls.
4.1 Basic Controls (Wireless Mode)
- Play/Pause: Press the Multi-function button (often the Power button or a dedicated play/pause button) once.
- Volume Up: Press the Volume + button.
- Volume Down: Press the Volume - button.
- Next Track: Press and hold the Volume + button (or a dedicated next track button).
- Previous Track: Press and hold the Volume - button (or a dedicated previous track button).
4.2 Call Management (Wireless Mode)
- Answer Call: Press the Multi-function button once when an incoming call is received.
- End Call: Press the Multi-function button once during a call.
- Reject Call: Press and hold the Multi-function button for approximately 2 seconds when an incoming call is received.
4.3 Memory Card Playback
- Once a memory card is inserted, the headphones will automatically switch to memory card playback mode.
- Use the Play/Pause, Volume +, and Volume - buttons to control playback as described in section 4.1.
5. Maintenance
Proper care and maintenance will extend the lifespan of your headphones.
- Cleaning: Use a soft, dry cloth to wipe the surfaces of the headphones. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Storage: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
- Battery Care: To preserve battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not used for extended periods.
- Water Exposure: These headphones are not waterproof. Avoid exposure to water, moisture, or rain.

Figure 3: Foldable Design for Storage
This image demonstrates the headphones in their folded configuration, highlighting their portability and ease of storage.
6. Troubleshooting
If you encounter issues with your headphones, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Headphones do not power on. | Ensure the headphones are fully charged. Connect to a power source and try again. |
| Cannot pair with device. |
|
| No sound in wireless mode. |
|
| No sound in wired mode. |
|
| Memory card not detected or playing. |
|
7. Specifications
Detailed technical specifications for the Bewinner Over-Ear Stereo Headphones.
| Feature | Specification |
|---|---|
| Model Number | Bewinnerf4wicg2ap6-12 |
| Connectivity | Bluetooth 5.3 |
| Wireless Distance | Up to 10m / 32.8ft |
| Supported Protocols | A2DP, AVRCP, HSP, HFP |
| Speaker Diameter | 40mm |
| Sensitivity | 121±3dB |
| Impedance | 32Ω±15% |
| Frequency Response | 20Hz-20KHz |
| 3.5mm Audio Input | Supported |
| Memory Card Support | Up to 32GB (Card not included) |
| Battery Type | Built-in 200mAh Lithium-Ion Battery |
| Material | ABS (Acrylonitrile Butadiene Styrene) |
| Item Weight | 9.4 ounces |
| Color | Khaki |
8. Warranty and Customer Support
Bewinner products are designed for reliability and performance. For warranty information or technical assistance, please refer to the retailer's return policy or contact Bewinner customer support through the official channels where the product was purchased.
Please retain your proof of purchase for any warranty claims.