Enphase Mobile EV Charger User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Enphase Mobile EV Charger. Please read this manual thoroughly before using the product and retain it for future reference.

The Enphase Mobile EV Charger is a portable Level 1 charging solution designed for electric vehicles. It connects to standard 110/120V AC outlets and features an SAE J1772 connector for universal compatibility. This charger is suitable for both indoor and outdoor use, is safety certified to ETL standards, and includes LED indicators for operational status.

2. Safety Information

Important Safety Instructions:

• Always connect the charger to a properly grounded 110/120V AC outlet.
• Do not use extension cords or adapters with this charger.
• Ensure the charging cable is not damaged before each use. Do not use if the cable or connector is frayed, broken, or exposed.
• Keep children and pets away from the charging area.
• Do not immerse the charger or its components in water. The unit is NEMA 4 rated for outdoor use, but direct submersion should be avoided.
• Operate the charger within the specified temperature range of -22°F to 122°F (-30°C to 50°C).
• In case of a fault, the charger is designed with protection mechanisms. If a fault occurs, disconnect the charger from the power source and consult the troubleshooting section.

This image shows the Enphase Mobile EV Charger connected to an EV in an outdoor environment, emphasizing its robust design for various weather conditions. The image also displays icons for safety certifications (ETL, Energy Star) and features like 3-year warranty, fault protection, and temperature range.

3. Product Overview

The Enphase Mobile EV Charger is designed for convenience and reliability. It features a compact control unit, a 25-foot rugged cable, and an SAE J1772 connector.

3.1 Components

• Control Unit: Houses the charging electronics and LED status indicators.
• SAE J1772 Connector: Standard connector for electric vehicles.
• NEMA 5-15 Plug: Standard 3-prong plug for 110/120V AC outlets.
• Charging Cable: 25-foot rugged cable for flexible placement.

This image displays the complete Enphase Mobile EV Charger unit, including the main control box with LED indicators, the SAE J1772 vehicle connector, the NEMA 5-15 wall plug, and the extensive 25-foot charging cable coiled for storage.

3.2 Features

• Universal Compatibility: Equipped with an SAE J1772 connector, compatible with all electric vehicles.
• User-Friendly Operation: Simple plug-and-charge functionality with no installation required.
• Status Indicators: Three colored LED lights on the control unit display power and charging status.
• Extended Reach: A 25-foot cable provides flexibility for charging locations.
• Durable Design: NEMA 4 rated enclosure for indoor/outdoor use, resistant to snow and rain.
• Safety Certified: ETL listed, Energy Star compliant, and UL certified for comprehensive safety and efficiency.
• Portable: Lightweight and compact design allows for easy transport and storage in a vehicle trunk.

This graphic highlights the main specifications and features of the charger, including its 12 Amp, 1.4 kW power output, 120 Volt Level 1 charging capability, NEMA 5-15 electrical plug compatibility, 25-foot rugged charging cable, and SAE J1772 charging connector.

4. Setup Instructions

The Enphase Mobile EV Charger requires no complex installation. Follow these steps to begin charging:

1. Unpack the Charger: Carefully remove the charger from its packaging.
2. Inspect for Damage: Before first use, visually inspect the charger, cable, and connectors for any signs of damage. Do not use if any damage is observed.
3. Select a Location: Choose a charging location that is dry, well-ventilated, and within reach of a standard 110/120V AC NEMA 5-15 outlet. Ensure the 25-foot cable can reach your vehicle without being stretched or creating a tripping hazard.
4. Plug into Power Outlet: Insert the NEMA 5-15 plug securely into a grounded 110/120V AC wall outlet. The control unit's power indicator LED should illuminate.
5. Prepare Vehicle: Ensure your electric vehicle is parked and turned off. Open the charging port cover on your vehicle.

5. Operating Instructions

Once the charger is set up, follow these steps to charge your electric vehicle:

1. Connect to Vehicle: Firmly insert the SAE J1772 connector into your vehicle's charging port. You should hear a click indicating it is securely latched.
2. Verify Charging Status: The LED indicators on the control unit will change to show that charging has commenced. Refer to the LED indicator guide (if provided separately or on the unit) for specific status meanings. Typically, a blinking or solid green light indicates active charging.
3. Monitor Charging: Monitor your vehicle's dashboard or app for charging progress. The charger will automatically stop when the vehicle's battery is full or when instructed by the vehicle.
4. Disconnect from Vehicle: To stop charging, first unlock your vehicle's charging port (if applicable) and then press the release button on the SAE J1772 connector. Gently pull the connector out of the vehicle's charging port.
5. Disconnect from Power: After disconnecting from the vehicle, unplug the NEMA 5-15 plug from the wall outlet.
6. Store Charger: Coil the cable neatly and store the charger in a dry, safe place, such as your vehicle's trunk or a garage shelf.

This image shows the Enphase Mobile EV Charger, with its cable neatly coiled, placed inside the trunk of a car, illustrating its compact size and portability for easy transport and storage.

The image displays the Enphase Mobile EV Charger, with its cable coiled, resting on a wooden shelf, demonstrating its suitability for convenient storage in a garage or similar space when not in use.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your Enphase Mobile EV Charger.

• Cleaning: Clean the charger's exterior with a soft, damp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure the charger is unplugged before cleaning.
• Cable Inspection: Periodically inspect the entire length of the charging cable, the NEMA 5-15 plug, and the SAE J1772 connector for any signs of wear, cuts, cracks, or corrosion.
• Storage: When not in use, store the charger in a clean, dry place, away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent kinks or damage.
• Avoid Damage: Do not drive over the charging cable or subject it to sharp bends or excessive force.

7. Troubleshooting

If you encounter issues with your Enphase Mobile EV Charger, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact Enphase customer support for further assistance.

8. Specifications

9. Warranty Information

The Enphase Mobile EV Charger is backed by a 3-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to make a warranty claim, please refer to the official warranty documentation provided with your product or contact Enphase customer support.

10. Support & Contact

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Enphase customer support.

• Manufacturer: Enphase Energy
• Website: www.enphase.com (Please visit the official website for the most current support contact information.)