Generisch Jiangboyue-836750

Download PDF
Contents

Generisch Bedside Tables with LED Lights User Manual

Model: Jiangboyue-836750

1. Introduction

Thank you for purchasing the Generisch Bedside Tables with LED Lights. This manual provides essential information for the safe assembly, operation, and maintenance of your new bedside tables. Please read this manual thoroughly before assembly and retain it for future reference.

A single white bedside table with two drawers and an upper open compartment, featuring a plant and a picture frame on top.

Figure 1: Generisch Bedside Table (single unit)

This image shows a single white bedside table, highlighting its modern design with two spacious drawers and an open top section, suitable for displaying decorative items or holding frequently used items. A small potted plant and a framed picture are placed on its surface, demonstrating its utility as a decorative and functional piece of furniture.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Always assemble the product on a soft, clean surface to prevent scratches.
  • Ensure all screws and fasteners are securely tightened before use. Do not overtighten.
  • Do not stand or sit on the bedside table.
  • Keep small parts and packaging materials away from children and pets to avoid choking hazards.
  • For LED lights, ensure the power adapter is connected to a suitable power outlet. Do not expose LED components to water or excessive moisture.
  • Do not exceed the maximum weight capacity of the top surface or drawers.

3. Package Contents

Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

Two identical white bedside tables shown side-by-side, indicating a pack of two.

Figure 2: Pack of Two Bedside Tables

This image displays two identical white bedside tables, as they would appear when packaged together. Each table features two drawers and an open top section, emphasizing that the product includes a pair of these units.

Your package should contain the following for each bedside table:

  • Side Panels (x2)
  • Top Panel (x1)
  • Bottom Panel (x1)
  • Back Panel (x1)
  • Drawer Fronts (x2)
  • Drawer Sides & Backs (x4 each)
  • Drawer Bottoms (x2)
  • Drawer Slides (x4 pairs)
  • LED Light Strip (x1)
  • LED Power Adapter (x1)
  • Remote Control for LED (x1)
  • Assembly Hardware (screws, dowels, cam locks, etc.)
  • Assembly Instructions (this manual)

4. Setup and Assembly

Tools required: Phillips head screwdriver, hammer (optional, for dowels).

  1. Prepare the Workspace: Clear a spacious, flat, and soft area to prevent damage to the furniture pieces during assembly.
  2. Assemble the Main Frame:
    • Attach the side panels to the bottom panel using the provided screws and dowels.
    • Secure the back panel into the grooves of the side panels.
    • Attach the top panel to the assembled frame. Ensure all connections are snug.
  3. Install Drawer Slides: Attach the drawer slides to the inner side panels of the main frame according to the pre-drilled holes. Ensure they are level and aligned.
  4. Assemble Drawers:
    • Connect the drawer sides and back to the drawer front using the provided hardware.
    • Slide the drawer bottom into the designated grooves.
    • Attach the remaining part of the drawer slides to the assembled drawer.
    A white bedside table with both drawers partially open, revealing the interior storage space.

    Figure 3: Bedside Table with Drawers Open

    This image shows the bedside table with its two drawers pulled out, illustrating the ample storage capacity. The smooth operation of the drawers is implied, showcasing the functional design for organizing personal items.

  5. Insert Drawers: Carefully slide the assembled drawers onto the installed drawer slides in the main frame.
  6. Install LED Lights:
    • Locate the designated area for the LED light strip (typically under the top panel or in the open compartment).
    • Peel off the adhesive backing from the LED strip and firmly press it into place.
    • Connect the LED strip to the power adapter.
  7. Final Check: Ensure all components are securely fastened and the table is stable.

5. Operating Instructions (LED Lights)

The integrated LED lights offer various color and mode options to enhance your room's ambiance.

  1. Power Connection: Plug the LED power adapter into a standard wall outlet.
  2. Using the Remote Control:
    • Point the remote control towards the LED receiver (usually a small sensor connected to the LED strip).
    • Press the "ON" button to turn the lights on.
    • Use the color buttons to select a specific static color (e.g., red, green, blue, white).
    • Use the "DIY" or "Flash/Fade/Strobe" buttons to cycle through various dynamic lighting modes.
    • Adjust brightness using the brightness up/down buttons.
    • Press the "OFF" button to turn the lights off.
    A white bedside table with its LED lights illuminated in a purple hue, with circular icons above showing different color options like yellow, red, green, and a color wheel.

    Figure 4: LED Light Color Options

    This image illustrates the adjustable LED lighting feature of the bedside table. The table is shown with its integrated lights glowing purple, and a graphic above it displays various color choices (yellow, red, green) along with a full color wheel, indicating the wide range of customizable lighting options available.

6. Maintenance

Proper care will extend the life and appearance of your bedside tables:

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
  • Spills: Immediately wipe up any spills to prevent staining or water damage.
  • LED Care: Do not attempt to disassemble the LED light strip. If the lights malfunction, refer to the troubleshooting section or contact customer support.
  • Hardware: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

ProblemPossible CauseSolution
LED lights do not turn on.
  • Power adapter not plugged in.
  • Remote control battery is dead.
  • LED strip connection loose.
  • Ensure power adapter is securely plugged into a working outlet.
  • Replace remote control battery.
  • Check all connections between LED strip, receiver, and adapter.
Drawers are stiff or do not slide smoothly.
  • Drawer slides misaligned.
  • Hardware not tightened correctly.
  • Drawer overloaded.
  • Remove drawer and re-align slides.
  • Check and tighten all assembly hardware for the drawer and frame.
  • Reduce items stored in the drawer.
Table is wobbly.
  • Assembly hardware loose.
  • Uneven floor.
  • Check and tighten all screws and fasteners.
  • Place shims under the legs if the floor is uneven.

8. Specifications

FeatureDetail
BrandGenerisch
ModelJiangboyue-836750
Product Dimensions39 x 35 x 55 cm (Length x Width x Height)
MaterialWood-based material
ColorWhite
Lighting TypeRGB LED Lights
Power Source (LED)Mains powered (via adapter)

9. Warranty and Support

Generisch products are manufactured to high-quality standards. For any questions, missing parts, or issues not covered in this manual, please contact your retailer or Generisch customer support. Please have your model number and purchase date ready when contacting support.

For warranty information, please refer to the terms and conditions provided at the time of purchase or visit the official Generisch website.

© 2024 Generisch. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.