VCM Floka XXL Steel Glass Display Cabinet

Introduction

Thank you for choosing the VCM Floka XXL Steel Glass Display Cabinet. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new display cabinet. Please read these instructions carefully before beginning assembly or use, and retain them for future reference.

The VCM Floka XXL is a modern display cabinet featuring a durable steel frame, genuine glass doors, and side panels. It includes three shelves, offering ample space for showcasing your collectibles. Its overall dimensions are approximately 180 cm in height, 60 cm in width, and 35 cm in depth.

Safety Information

• Adult Assembly Required: This product requires adult assembly. Keep children away during the assembly process.
• Handle Glass with Care: Glass components are fragile. Handle them carefully to prevent breakage and injury. Wear protective gloves if necessary.
• Secure to Wall: For safety, especially in households with children, it is highly recommended to secure the cabinet to a wall using an anti-tip device (not explicitly included but generally recommended for tall furniture).
• Weight Distribution: Distribute items evenly on shelves. Do not overload shelves, as this can compromise stability and cause damage.
• Stable Surface: Place the cabinet on a flat, level, and stable surface to prevent tipping.

Setup and Assembly

The VCM Floka XXL display cabinet requires assembly. Please ensure all components are present before starting. Refer to the separate assembly instructions provided in your package for detailed, step-by-step guidance. A simple assembly manual and all necessary assembly materials are included with your product.

Included Components:

• Cabinet frame components (steel)
• Glass doors and side panels
• Three glass shelves
• Door handles
• Assembly hardware (screws, connectors, etc.)
• Simple assembly instructions

Assembly Tips:

• Clear a spacious area for assembly.
• Lay out all parts and hardware, checking against the parts list in the separate assembly manual.
• Use appropriate tools as indicated in the assembly manual.
• Do not overtighten screws to avoid damaging components.
• Have a second person assist with lifting and positioning large or heavy parts, especially glass panels.

Figure 1: Technical drawing showing the dimensions and internal structure of the cabinet.

Figure 2: The VCM Floka XXL Steel Glass Display Cabinet fully assembled and in use.

Operating Instructions

The VCM Floka XXL display cabinet is designed for easy use and display of various items.

Opening and Closing Doors:

• Gently pull the door handle to open the glass doors.
• To close, push the doors firmly until they are securely shut. Avoid slamming the doors to prevent damage to the glass and frame.

Placing Items on Shelves:

• Carefully place your items on the glass shelves.
• Ensure weight is distributed evenly across each shelf.
• Do not exceed the maximum weight capacity of each shelf (specific capacity not provided, use discretion and avoid excessively heavy items).

Figure 3: Close-up of the cabinet doors and shelves.

Maintenance and Care

Regular cleaning and maintenance will help preserve the appearance and longevity of your VCM Floka XXL display cabinet.

Cleaning the Frame:

• Wipe the steel frame with a soft, damp cloth.
• For stubborn marks, use a mild, non-abrasive cleaner specifically designed for metal surfaces.
• Dry immediately with a clean, soft cloth to prevent water spots or streaks.

Cleaning the Glass:

• Use a standard glass cleaner and a lint-free cloth or paper towel.
• Spray the cleaner onto the cloth, not directly onto the glass, to avoid dripping onto other materials.
• Wipe the glass surfaces until clean and streak-free.

General Care:

• Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish of the steel and scratch the glass.
• Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Keep the cabinet away from direct sunlight and extreme temperature changes to prevent material degradation.

Troubleshooting

Here are solutions to some common issues you might encounter:

Cabinet Feels Wobbly:

• Check Connections: Ensure all assembly screws and fasteners are securely tightened.
• Level Surface: Verify that the cabinet is placed on a completely flat and level surface. Adjust the feet if possible, or use shims under the legs to stabilize.
• Wall Anchoring: If wobbling persists, ensure the cabinet is properly anchored to the wall using an anti-tip kit.

Doors Not Closing Properly:

• Hinge Alignment: Check if the door hinges are properly aligned and tightened. Adjust if necessary according to the assembly manual.
• Obstruction: Ensure there are no items on the shelves or debris obstructing the door's path.
• Leveling: An unlevel cabinet can cause doors to sag. Re-level the cabinet as described above.

Glass Has Streaks After Cleaning:

• Lint-Free Cloth: Use a clean, lint-free microfiber cloth for wiping glass.
• Proper Cleaner: Ensure you are using a dedicated glass cleaner.
• Technique: Wipe in a consistent direction (e.g., top to bottom) and buff dry immediately.

Specifications

Warranty Information

Spare parts for this product are available in the EU for a period of 2 years from the date of first availability.

For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact VCM customer support directly.

Customer Support

If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact VCM customer support:

• Manufacturer: VCM Morgenthaler GmbH
• Address: Ersteiner Straße 12, D-79346 Endingen, Germany
• Email: amazon@vcm-gruppe.de
• Phone: +49764290789310