realme TechLife Studio H1
Contents
realme TechLife Studio H1 Wireless Headphone User Manual
Model: RMA2411
Introduction
Thank you for choosing the realme TechLife Studio H1 Wireless Headphones. This manual provides detailed instructions on how to set up, operate, and maintain your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Safety Information
- Do not expose the headphones to extreme temperatures or humidity.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not disassemble or attempt to repair the headphones yourself.
- Keep out of reach of children.
- Use only the provided charging cable.
- Prolonged listening at high volume levels may cause hearing damage.
Package Contents
- realme TechLife Studio H1 Wireless Headphones
- Charging Cable
- User Manual
Product Overview

Figure 1: realme TechLife Studio H1 Wireless Headphones (Black)

Figure 2: Key Features Overview
This image highlights the main features such as 43dB Active Noise Cancellation, 70 Hours Headphone Battery Life, 360° Spatial Audio Effect, 40mm Giant PET Diaphragm, Call Noise Cancellation, Dual Device Connection, and Hi-Res Certification with LDAC High Fidelity Decoding.

Figure 3: Headphone Controls and Functions
This diagram illustrates the various buttons and their corresponding actions, including power, volume, track control, call management, and ANC/Spatial Audio toggles.
Setup
1. Charging the Headphones
Before first use, fully charge your headphones. Connect the provided charging cable to the charging port on the headphones and the other end to a USB power adapter (not included). A full charge takes approximately 1.5 hours.
2. Powering On/Off
- Power On: Press and hold the Power button for 3 seconds until the indicator light flashes.
- Power Off: Press and hold the Power button for 5 seconds until the indicator light turns off.
3. Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power button for 3 seconds to enter pairing mode (indicator light will flash rapidly).
- On your device (smartphone, tablet, computer), enable Bluetooth and search for "realme TechLife Studio H1" in the list of available devices.
- Select the headphones to connect. Once connected, the indicator light will stop flashing.
- Dual-Device Connection: The headphones support simultaneous connection to two devices. After connecting to the first device, put the headphones back into pairing mode and connect to the second device. The headphones will intelligently switch between devices.
- Google Fast Pair: For compatible Android devices, simply power on the headphones near your device, and a pop-up notification will appear for quick pairing.
Operating Instructions
Basic Controls
| Action | Button/Gesture | Function |
|---|---|---|
| Play/Pause | Short press Power button | Toggles music playback. |
| Volume Up | Short press '+' button | Increases audio volume. |
| Volume Down | Short press '-' button | Decreases audio volume. |
| Next Track | Press and hold '+' button for 2s | Skips to the next song. |
| Previous Track | Press and hold '-' button for 2s | Skips to the previous song. |
| Answer/End Call | Short press Power button | Manages incoming and active calls. |
| Decline Call | Press and hold Power button for 1s | Rejects an incoming call. |
| Activate Voice Assistant | Short press Power button twice | Activates your device's voice assistant. |
Noise Cancellation and Audio Modes
The realme TechLife Studio H1 features 43dB Hybrid Noise Cancellation and various audio modes for an optimized listening experience.
- ANC (Active Noise Cancellation): Short press the ANC button to cycle through "Awareness Mode", "ANC On", and "ANC Off".

Experience tranquility with 43dB Hybrid Noise Cancellation.

Adaptive ANC adjusts to your environment: Mild (Office), Moderate (Outdoors), Deep (Subway/Public Transport).
- Spatial Audio Effect: Double press the ANC button to toggle 360° Spatial Audio Effect On/Off. This feature provides an immersive, stereoscopic sound experience. Note: Spatial audio effect is not supported in wired mode.

Immerse yourself in sound with 360° Spatial Audio.
- Game Mode/Music Mode: Press and hold the ANC button for 1 second to switch between Game Mode (80ms ultra-low latency) and Music Mode. Note: Game mode is not supported in LDAC mode.
- LDAC On/Off: Triple press the ANC button to toggle LDAC high-fidelity audio decoding On/Off.
Call Functions
The headphones feature Call Noise Cancellation for clear communication.

Enjoy clear conversations with Call Noise Cancellation.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones. Do not use harsh chemicals or abrasive materials.
- Storage: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The headphones are designed with a collapsible metal shaft for easy storage.

The headphones feature a collapsible design for convenient storage and portability.
- Battery Care: To preserve battery life, charge the headphones regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair with device. | Headphones not in pairing mode; Bluetooth off on device; device too far. | Ensure headphones are in pairing mode; enable Bluetooth on device; move device closer (within 10 meters). |
| No sound or low volume. | Volume too low; headphones not connected; incorrect audio output selected. | Increase volume on headphones and device; re-pair headphones; check device's audio output settings. |
| Intermittent connection. | Interference; device too far; low battery. | Move away from sources of interference; ensure device is within range; charge headphones. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | TechLife Studio H1 (RMA2411) |
| Connectivity | Bluetooth 5.4 |
| Bluetooth Range | 10 Metres |
| Audio Driver Size | 40mm Dynamic Driver |
| Noise Cancellation | 43dB Hybrid Noise Cancellation |
| Audio Latency | 80ms (Game Mode) |
| Battery Life | Up to 70 Hours |
| Charging Time | Approx. 1.5 Hours |
| Weight | 450 Grams |
| Material | Polycarbonate (PC) |
| Special Features | Built-In Voice Assistant, Fast Charging, Spatial Audio, Dual-device connection, Google Fast Pair |
Warranty and Support
Your realme TechLife Studio H1 Wireless Headphones come with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official realme support website. For technical support or service inquiries, please contact realme customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.