1. Introduction
Thank you for choosing the Cecotec Conga 2000 Carpet&Spot Clean Compact. This appliance is designed for effective cleaning of carpets, upholstery, and other fabric surfaces by spraying cleaning solution and simultaneously vacuuming up dirt and liquid. Please read this manual carefully before use to ensure proper operation, maintenance, and safety.
2. Safety Instructions
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.
- Read all instructions before operating the appliance.
- Do not immerse the appliance in water or other liquids.
- Keep the power cord away from heated surfaces.
- Do not use the appliance if the cord or plug is damaged.
- Ensure the voltage indicated on the appliance matches your local power supply.
- Always unplug the appliance before cleaning or performing maintenance.
- Do not use the appliance to pick up flammable or combustible liquids, or anything that is burning or smoking.
- This appliance is for household use only.
- Keep children and pets away from the appliance during operation.
3. Product Components
Familiarize yourself with the parts of your Cecotec Conga 2000 Carpet&Spot Clean Compact.
- Main Unit: Houses the motor, clean water tank, and dirty water tank.
- Clean Water Tank: 800 ml capacity for water and cleaning solution.
- Dirty Water Tank: 500 ml capacity for collected dirty water.
- Flexible Hose: Connects the main unit to the cleaning nozzle.
- Cleaning Nozzle: Features a spray function and suction opening for cleaning surfaces.
- Power Cable: For connecting the appliance to an electrical outlet.
4. Setup
Follow these steps to prepare your cleaner for operation:
- Position the Unit: Place the main unit on a stable, flat surface near the area to be cleaned.
- Fill the Clean Water Tank: Open the clean water tank (800 ml capacity) and fill it with clean water. You may add a suitable carpet or upholstery cleaning solution as per the solution manufacturer's instructions. Do not overfill.
- Ensure Dirty Water Tank is Empty: Verify that the dirty water tank (500 ml capacity) is empty and properly secured.
- Connect Power: Unwind the power cable and plug it into a suitable electrical outlet.
5. Operating Instructions
The Cecotec Conga 2000 Carpet&Spot Clean Compact is designed for deep cleaning with 330 W power and 9 kPa suction pressure.
- Power On: Press the power button located on the main unit to turn on the appliance.
- Spray Cleaning Solution: Hold the cleaning nozzle over the area to be cleaned. Press the trigger on the nozzle handle to spray the cleaning solution onto the surface.
- Vacuum and Clean: While spraying, move the nozzle slowly over the soiled area. The appliance will simultaneously spray, scrub (if using a brush attachment), and vacuum up the dirty solution.
- Repeat as Needed: For heavily soiled areas, you may need to repeat the process. Ensure the surface is not oversaturated.
- Monitor Tanks: Pay attention to the clean water tank level and the dirty water tank level. The appliance has a float mechanism in the dirty water tank that will stop operation when full to prevent overflow.
- Power Off: Once cleaning is complete, press the power button to turn off the appliance and unplug it from the electrical outlet.
6. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your appliance.
- Empty Dirty Water Tank: After each use, carefully remove the dirty water tank and empty its contents. Rinse the tank thoroughly with clean water.
- Clean Clean Water Tank: If cleaning solution was used, rinse the clean water tank to prevent residue buildup.
- Clean Nozzle and Hose: Detach the cleaning nozzle and rinse it under running water. Ensure any debris is removed from the suction opening. Flush the hose with clean water if necessary.
- Wipe Down Unit: Use a damp cloth to wipe the exterior of the main unit. Do not use abrasive cleaners.
- Storage: Store the appliance in a dry, cool place, away from direct sunlight. Ensure all tanks are empty and dry before storage.
7. Troubleshooting
If you encounter issues with your appliance, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on | Not plugged in; Power outlet fault; Power button not pressed | Check power cord connection; Test outlet with another device; Press power button firmly. |
| No spray from nozzle | Clean water tank empty; Nozzle clogged; Pump issue | Refill clean water tank; Clean nozzle thoroughly; Contact customer support if pump is suspected. |
| Poor suction | Dirty water tank full; Hose or nozzle clogged; Tank not properly sealed | Empty dirty water tank; Clear any blockages in hose/nozzle; Ensure tanks are securely latched. |
| Water leaking | Tanks not properly seated; Seals damaged | Re-seat tanks firmly; Inspect seals for damage and contact support if necessary. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Cecotec |
| Model Name | Conga 2000 Carpet&Spot Clean Compact |
| Item Model Number | A01_EU01_100073 |
| Power | 330 W |
| Clean Water Tank Capacity | 800 ml |
| Dirty Water Tank Capacity | 500 ml |
| Suction Pressure | 9 kPa |
| Item Weight | 4 Kilograms |
| Item Dimensions (LxWxH) | 35 x 19 x 32.5 Centimeters |
| Colour | Black |
9. Warranty and Support
This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Cecotec website. For technical support, spare parts, or service inquiries, please contact Cecotec customer service directly.
Keep your purchase receipt as proof of purchase for warranty claims.
