Cellavi P8-02

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Cellavi 3-in-1 Water Filters for Pet Drinking Fountains

Model: P8-02

Product Overview

This set of 10 Cellavi 3-in-1 water filters is designed to provide fresh and clean water for your cat or dog's drinking fountain. Made from high-quality, natural materials including cotton, activated charcoal, and coconut shell activated carbon, these filters effectively remove chlorine, unpleasant odors, and impurities, ensuring healthy and tasty water for your beloved pets.

Ten Cellavi 3-in-1 water filters, with an illustration of coconut and charcoal, the primary filtering materials.

Image: A pack of ten Cellavi 3-in-1 water filters, highlighting the natural filtering components like coconut and charcoal.

  • 3-in-1 Filter Design: Effectively removes chlorine, bad odors, and impurities from the water.
  • Easy Installation: Filters are simple to replace without the need for tools.
  • Long-lasting Performance: Each filter remains effective for up to 3 weeks, depending on usage.
  • Natural Materials: Constructed from cotton, charcoal, and coconut for natural filtration.

Setup and Installation

Before first use, or when replacing an old filter, follow these steps:

  1. Rinse Thoroughly: Rinse the new filter thoroughly under running water for several minutes. This helps to remove any loose carbon particles and ensures optimal performance.
  2. A hand rinsing a Cellavi water filter under a running tap.

    Image: A hand rinsing a Cellavi filter under a faucet to prepare it for use.

  3. Remove Old Filter: Disassemble your pet drinking fountain according to its specific instructions and remove the used filter.
  4. Insert New Filter: Place the rinsed new filter into the designated slot in your pet drinking fountain. Ensure it is seated correctly.
  5. Reassemble Fountain: Reassemble the drinking fountain and fill it with fresh water.

Operating Instructions

Once installed, the Cellavi 3-in-1 water filter operates continuously to purify the water in your pet's drinking fountain. The multi-layer filtration system works as follows:

Diagram illustrating the three layers of the Cellavi filter: Cotton, Charcoal, and Coconut.

Image: A cross-section diagram showing the three filtration layers: Cotton for coarse particles, Charcoal for bacteria and odors, and Coconut for vitamins and minerals.

  • Cotton Layer: Filters out larger particles such as hair and sediment.
  • Activated Charcoal Layer: Removes bacteria, chlorine, and unpleasant odors.
  • Coconut Shell Activated Carbon Layer: Further purifies water and helps retain beneficial minerals.

Ensure the water level in the fountain is always adequate for proper filtration and pump operation.

Maintenance

Regular maintenance is crucial for optimal water quality and the longevity of your pet fountain. It is advised to:

  • Clean the Pump/Sponge: Clean the fountain's pump and sponge at least every three weeks. Refer to your fountain's manual for specific cleaning instructions.
  • Replace the Filter: Replace the water filter at least every three weeks. The frequency may vary depending on water hardness and the number of pets using the fountain. Each filter is designed for up to 3 weeks of effective use.
Cellavi filters in a box, indicating 1 filter for 2 weeks use and 10 filters for up to 5 months.

Image: Original Cellavi filters in their packaging, illustrating the recommended replacement schedule.

Troubleshooting

If you notice a decrease in water quality, such as unusual odors or visible impurities, it is likely time to replace the filter. Ensure the filter is properly seated and the fountain is clean. If issues persist after replacing the filter and cleaning the fountain, consult your pet fountain's user manual or contact Cellavi customer support.

Specifications

FeatureDetail
Product Dimensions4.5 x 1 x 11 cm (per filter)
MaterialCharcoal, Cotton, Coconut Shell Activated Carbon
Quantity10 pieces per set
Model NumberP8-02
Recommended ReplacementEvery 3 weeks
A Cellavi filter with dimensions labeled: 4.5 cm width and 11 cm length.

Image: Dimensions of a single Cellavi filter, showing its length and width.

Warranty Information

Cellavi water filters come with a 1-year warranty from the date of delivery. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, concerns, or support regarding your Cellavi water filters, please contact Cellavi customer service. Refer to the contact information provided with your product packaging or visit the official Cellavi website for assistance.

© 2024 Cellavi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.