1. Introduction
This manual provides essential information for the safe and efficient operation of your LiTime 12V 100Ah LiFePO4 Self-Heating Battery. This battery is designed for various applications including RVs, solar systems, trolling motors, and marine use. It features advanced Bluetooth 5.0 monitoring, two intelligent heating modes, and a robust 100A Battery Management System (BMS) for comprehensive protection.
2. Product Overview
The LiTime 12V 100Ah LiFePO4 Self-Heating Battery is a high-performance, lightweight, and maintenance-free power solution. It offers a long lifespan with over 4000 deep cycles at 100% Depth of Discharge (DOD) and can be expanded up to a 20.48kWh system (4P4S configuration).

Image 1: LiTime 12V 100Ah LiFePO4 Battery highlighting its two innovative heating modes.
2.1. Dual Heating Modes
- Regular Mode: Heats the battery below 41°F (5°C) when charged, stopping at 50°F (10°C) to initiate charging.
- Energy-Efficient Mode: Heats the battery using its own power, shortening the heating time after connecting the charging device, allowing for direct charging.

Image 2: Detailed view of the battery's internal heating function and temperature thresholds.
2.2. Bluetooth 5.0 Monitoring
Monitor your battery's status in real-time through the LiTime App. Stay informed about power levels, voltage, current, temperature, and cycle times to prevent unexpected shutdowns. The app also allows you to select different battery heating modes.

Image 3: Screenshot of the LiTime App interface showing real-time battery monitoring data.
2.3. Built-in 100A BMS with 20+ Protections
The integrated Battery Management System (BMS) provides extensive protection against overcharging, over-discharging, over-current, short circuits, low temperatures, and high temperatures. It also features a 30-second overload auto-recovery function. The battery is IP65 dust/water resistant, ensuring reliable operation in various environmental conditions.

Image 4: Diagram illustrating the intelligent BMS and its various protection features, alongside the IP65 rating.
3. Package Contents
- 1x LiTime 12V 100Ah Group 24 All-around LiFePO4 Battery
4. Installation & Setup
4.1. Initial Activation
Upon first receipt or after switching off, the battery requires charging with a lithium-activation or MPPT charger to activate the Bluetooth function.
4.2. Physical Installation
The battery is a universal Group 24 fit, directly replacing old lead-acid batteries without modifications. Ensure proper terminal connections using the provided M8-16 terminal bolts. If screws are attached directly or if the thickness of the OT terminal sheet of the harness is less than 2mm, add shims for locking.

Image 5: Dimensions of the LiTime 12V 100Ah LiFePO4 Battery and specifications for M8-16 terminal bolts.
4.3. System Expansion
The battery supports connecting up to 16 units (4P4S configuration) for a massive 51.2V 400Ah system, providing up to 20.48kWh of energy storage. This is ideal for large RVs, home backup, and trolling motors.
