HOUSBAY Wooden Radio Alarm Clock - User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your HOUSBAY Wooden Radio Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

A front view of the HOUSBAY Wooden Radio Alarm Clock, displaying the time in blue LED digits.

Key Features

• Gentle Wake-Up: Alarm volume gradually increases for a natural awakening experience.
• FM Radio: Customize up to 20 FM radio presets for easy access to your favorite stations.
• Dimmable Display: Adjustable digital display brightness to prevent light disruptions during sleep.
• Integrated Nightlight: A gentle nightlight for relaxation or low-light guidance.
• Compact Design: Space-saving wooden design suitable for any bedside table.

An image highlighting the three main functions of the HOUSBAY alarm clock: Alarm Clock, FM Radio, and Nightlight.

Setup Guide

1. Power Connection

Connect the provided power adapter to the DC IN port on the back of the alarm clock and then plug it into a standard electrical outlet. The clock will power on and the display will illuminate.

2. Initial Time Setting

1. Press and hold the Time Set button (usually indicated by a clock icon) on the top panel until the hour digits begin to flash.
2. Use the Up or Down arrow buttons to adjust the hour. Pay attention to the AM/PM indicator.
3. Press the Time Set button again to move to the minute setting. Use the Up or Down arrow buttons to adjust the minutes.
4. Press the Time Set button one more time to confirm and exit the time setting mode.

3. Battery Backup (Not Included)

While the clock operates on corded electric power, it supports a battery backup (batteries not included) to retain time and alarm settings during a power outage. Insert the specified battery type into the battery compartment on the bottom of the unit. Note: The display will not remain lit during a power outage when operating on battery backup.

Operating Instructions

1. Display Brightness and Color Adjustment

The clock features a dimmable LED display. Use the dedicated Display Dimmer slider or button (often on the back or top) to adjust the brightness level from very dim to bright. The display also offers various color options, typically cycled through by pressing a specific button (refer to the top panel buttons for a lightbulb or color icon). The nightlight below the display also has adjustable colors and brightness.

The HOUSBAY alarm clock on a wooden table, with dimensions 3.55 inches wide and 3.15 inches high indicated, emphasizing its compact size and clear display.

2. Nightlight Operation

The integrated nightlight provides a soft glow. Press the Nightlight button (often a lightbulb icon) to turn it on/off and cycle through different color options. Some models may also allow setting a timer for the nightlight (e.g., 30, 60, 120, 180 minutes) by repeatedly pressing the nightlight timer button.

The HOUSBAY alarm clock on a bedside table in a dimly lit room, showcasing its gentle blue nightlight feature.

3. Alarm Settings

1. Press and hold the Alarm Set button (bell icon) until the alarm hour digits flash.
2. Use the Up or Down arrow buttons to set the desired alarm hour.
3. Press Alarm Set again to set the minutes, then use Up or Down.
4. Press Alarm Set a third time to select the alarm sound. You can choose from 8 pre-set sounds (e.g., bird chirping, nature sounds) or an FM radio station. Use Up or Down to cycle through options.
5. Press Alarm Set to confirm. The alarm icon will appear on the display.
6. To activate/deactivate the alarm, briefly press the Alarm Set button. The alarm icon will appear/disappear.
7. When the alarm sounds, press the Snooze button to temporarily silence it for 9 minutes. To turn off the alarm completely, press any other button.

4. FM Radio Operation

1. Extend the FM antenna located at the back of the unit for optimal reception.
2. Press the FM Radio button (radio icon) to turn the radio on or off.
3. To automatically scan and save available FM stations, press and hold the FM Radio button. The clock will scan and store up to 20 presets.
4. To cycle through saved presets, briefly press the Forward or Backward arrow buttons.
5. Adjust the volume using the Volume Up and Volume Down buttons.

A person smiling while reading a newspaper and holding a mug, with the HOUSBAY alarm clock on a table, suggesting enjoyment of radio features.

Maintenance

To ensure the longevity and optimal performance of your HOUSBAY Wooden Radio Alarm Clock, follow these simple maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the surface of the clock. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish.
• Placement: Place the clock on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.
• Ventilation: Ensure the speaker and ventilation areas are not obstructed to prevent overheating.
• Power Cord: Regularly inspect the power cord for any damage. If damaged, discontinue use and contact customer support.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact HOUSBAY customer service directly. Keep your purchase receipt for warranty claims.