1. Introduction
Thank you for choosing the TOTAL TGSLI20581 Cordless Pruning Saw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your tool. Please read this manual thoroughly before first use and keep it for future reference.
This compact and powerful 20V cordless pruning saw is designed for effortless trimming and cutting of branches, shrubs, and small trees. Its lightweight design and 13 cm bar length make it ideal for various gardening tasks.
2. Safety Instructions
General Safety Rules
- Always read and understand all instructions before operating the tool.
- Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and sturdy footwear. Hearing protection is recommended.
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
- Use only the charger specified by the manufacturer (TFCLI2001E) to recharge the battery (TFBLI2001).
- Do not expose battery packs or tools to fire or excessive temperature.
- Do not use a damaged battery pack or tool.
- Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing power tools.
Personal Safety
- Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
3. Package Contents
Verify that all items listed below are present and undamaged upon unpacking:
- 1 x TOTAL TGSLI20581 Cordless Pruning Saw
- 1 x 20V 2.0Ah Battery Pack (TFBLI2001)
- 1 x Charger (TFCLI2001E)
- 1 x 13 cm Saw Chain
- 1 x 13 cm Chain Saw Bar
- 1 x Multi-Wrench
- 1 x Empty Oil Bottle (for chain lubrication)
- 1 x User Manual
4. Setup
4.1 Charging the Battery
- Connect the charger (TFCLI2001E) to a standard 220-240V ~ 50/60Hz power outlet.
- Insert the 20V 2.0Ah battery pack (TFBLI2001) into the charger.
- Allow the battery to charge fully. Refer to the charger's indicator lights for charging status.
- Once charged, disconnect the battery from the charger.
4.2 Installing the Bar and Chain
Note: Ensure the battery is removed from the saw before performing any assembly or maintenance.
- Loosen the side cover nuts using the multi-wrench and remove the side cover.
- Carefully place the saw chain around the guide bar, ensuring the cutting edges are facing the correct direction (refer to markings on the chain and bar).
- Fit the chain onto the drive sprocket and align the guide bar with the mounting studs.
- Replace the side cover and hand-tighten the nuts. Do not fully tighten yet.
- Adjust the chain tension using the tensioning screw until the chain is snug but can still be pulled freely around the bar by hand. There should be a small gap between the chain and the bottom of the bar.
- Fully tighten the side cover nuts with the multi-wrench.
4.3 Lubricating the Chain
Regular chain lubrication is crucial for optimal performance and tool longevity. Use the empty oil bottle provided to apply suitable chain oil.
- Apply a small amount of chain oil directly onto the chain and guide bar groove.
- Manually rotate the chain to distribute the oil evenly.
- Repeat this process periodically during operation, especially during extended use.
5. Operating Instructions
5.1 Attaching the Battery
Slide the charged battery pack into the base of the saw handle until it clicks securely into place.
5.2 Starting and Stopping the Saw
- To start: Press and hold the safety lock button (usually located on the side of the handle), then squeeze the trigger switch.
- To stop: Release the trigger switch. The safety lock button will automatically reset.
5.3 Cutting Techniques
- Always maintain a firm grip on the saw with both hands.
- Ensure stable footing and balance before starting a cut.
- Allow the saw to reach full speed before engaging the chain with the material.
- Apply light, consistent pressure. Do not force the saw through the material.
- For branches, cut from the top down to avoid pinching the blade. For larger branches, make an undercut first to prevent bark stripping.
- Be aware of kickback. Avoid cutting with the tip of the guide bar.
Figure 1: An image showing the TOTAL TGSLI20581 Cordless Pruning Saw. The saw features a teal and grey body, a 13 cm bar and chain, and a detachable 20V 2.0Ah battery pack.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your pruning saw. Always remove the battery pack before performing any maintenance.
6.1 Cleaning
- After each use, clean the saw body with a damp cloth.
- Remove sawdust and debris from the chain, guide bar, and sprocket area. A brush or compressed air can be used.
- Ensure ventilation openings are clear of obstructions.
6.2 Chain Sharpening and Replacement
- A dull chain will reduce cutting efficiency and increase strain on the motor. Sharpen the chain regularly or replace it when necessary.
- Refer to a qualified service technician for chain sharpening or replacement if you are unsure.
- Always use a replacement chain of the correct size and type (13 cm).
6.3 Guide Bar Maintenance
- Clean the guide bar groove regularly to remove accumulated sawdust and debris.
- Flip the guide bar periodically to ensure even wear.
- Check the guide bar for burrs or damage. File down any burrs.
6.4 Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store batteries in a discharged state for extended periods. Charge them periodically.
- Dispose of old or damaged batteries according to local regulations.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | Battery not charged or improperly inserted; Safety lock not engaged; Faulty switch. | Charge battery and ensure proper insertion; Press safety lock before trigger; Contact service for switch replacement. |
| Chain does not move or moves slowly | Chain too tight; Chain dull or damaged; Insufficient lubrication; Debris in sprocket area. | Adjust chain tension; Sharpen or replace chain; Lubricate chain; Clean sprocket area. |
| Excessive vibration | Loose chain; Damaged chain or bar; Loose components. | Adjust chain tension; Inspect and replace damaged parts; Check all fasteners. |
| Saw cuts poorly or unevenly | Dull chain; Incorrect chain tension; Worn guide bar. | Sharpen or replace chain; Adjust chain tension; Inspect and replace guide bar if worn. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | TGSLI20581 |
| Brand | TOTAL |
| Voltage | 20V |
| Bar Length | 13 cm (5 inches) |
| Chain Speed | Up to 5 m/s |
| Power Source | Battery Powered |
| Battery Type | Lithium-ion (TFBLI2001) |
| Charger Voltage | 220-240V ~ 50/60Hz (TFCLI2001E) |
| Handle Material | Thermoplastic Elastomer |
| Blade Material | High-Speed Steel |
| Weight | Approximately 5 kg (including battery) |
| Product Dimensions (L x W x H) | 10 x 10 x 35 cm (approximate) |
9. Warranty and Support
TOTAL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. Please refer to your purchase receipt or contact your retailer for specific warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact TOTAL customer service or visit the official TOTAL website for contact information in your region.
