Introduction
Thank you for choosing the Wisoqu Retro Bluetooth 5.3 Speaker. This device combines a high-quality Bluetooth speaker with a unique moon-style ambient light, a clear clock display, and a radio function, designed to enhance your home environment with both sound and visual appeal. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance and longevity of your speaker.
Image: Front view of the Wisoqu Retro Bluetooth Speaker, showcasing the moon-style ambient light, digital clock display, and vintage record player aesthetic.
Safety Information
- Read all instructions carefully before use.
- Keep the device away from water, moisture, and extreme temperatures.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Use only the provided charging cable and adapter (if applicable) to prevent damage.
- Avoid placing the speaker in direct sunlight or near heat sources.
- Keep out of reach of children.
Package Contents
Please check the package for the following items:
- 1 x Wisoqu Retro Bluetooth Speaker with Moon Style Ambient Light and Clock Display
- 1 x Charging Cable (USB)
- 1 x Audio Cable (3.5mm AUX)
- 1 x User Manual (this document)
Image: The Wisoqu Retro Bluetooth Speaker shown alongside its USB charging cable and 3.5mm audio cable.
Setup
1. Charging the Speaker
- Connect the provided USB charging cable to the charging port on the speaker.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator (if present) will illuminate during charging and turn off or change color when fully charged.
- A full charge takes approximately 2 hours.
2. Powering On/Off
- To power on, press and hold the On/Off button (refer to button diagram in Operating section) until the display lights up.
- To power off, press and hold the On/Off button again until the display turns off.
Operating Instructions
Button Functions Overview
Image: Detailed diagram illustrating the location and function of each control button on the top panel of the speaker, including volume, track control, mode, lighting adjustment, and radio antenna.
- On/Off Button: Powers the device on or off.
- Up/Volume+ Button: Increases volume; short press for next track in Bluetooth mode.
- Next Song/Volume- Button: Decreases volume; short press for previous track in Bluetooth mode.
- M/Play Button: Switches between modes (Bluetooth, Radio, AUX); plays/pauses audio in Bluetooth mode.
- Lighting Adjustment Button: Cycles through ambient light modes and brightness levels.
- Radio Antenna: Extend for better radio reception.
- Time Display: Shows current time.
1. Bluetooth Mode
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth icon or audible prompt.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "Wisoqu Speaker" (or similar name) from the list to pair.
- Once paired, you will hear a confirmation sound, and the Bluetooth indicator will stop flashing.
- You can now play audio from your device through the speaker.
- Use the Up/Volume+ and Next Song/Volume- buttons to adjust volume and skip tracks.
- Press the M/Play button to play or pause audio.
2. Radio Function
- Press the M/Play button repeatedly until the speaker enters Radio mode. The display will show the radio frequency.
- Extend the radio antenna for optimal reception.
- Use the Up/Volume+ and Next Song/Volume- buttons to scan for radio stations. A long press typically initiates an automatic scan, while short presses fine-tune the frequency.
- Adjust volume using the same buttons.
3. AUX Input Mode
- Connect one end of the provided 3.5mm audio cable to the AUX input port on the speaker.
- Connect the other end to the audio output jack of your external device (e.g., MP3 player, computer).
- Press the M/Play button repeatedly until the speaker enters AUX mode.
- Control audio playback from your external device. Volume can be adjusted on both the speaker and the external device.
4. Ambient Light Control
The speaker features a moon-style ambient light with various settings.
Image: The Wisoqu speaker displaying its warm, half-moon ambient light, creating a cozy atmosphere.
- Press the Lighting Adjustment button to cycle through different light modes (e.g., warm white, color-changing, off).
- Long press the Lighting Adjustment button to adjust the brightness of the current light mode.
5. Clock Display Settings
The digital display shows the current time.
- To set the time, typically a long press on the M/Play button or a dedicated clock button (if available, not explicitly shown in diagram) will enter time setting mode.
- Use the Up/Volume+ and Next Song/Volume- buttons to adjust hours and minutes.
- Press the M/Play button again to confirm and move to the next setting (e.g., minutes, 12/24-hour format).
- Refer to the specific instructions on the product packaging or a dedicated quick start guide for precise clock setting steps if these general instructions do not apply.
6. 360° Surround Sound
The speaker is designed to deliver immersive 360-degree surround sound.
Image: The Wisoqu speaker with visual effects indicating its 360-degree surround sound capability, spreading audio in all directions.
For the best audio experience, place the speaker in a central location within your listening area. No special settings are required to activate the surround sound feature; it is an inherent design characteristic of the speaker.
Product Video
Video: An official product video demonstrating the Wisoqu Retro Bluetooth Speaker's features, including the ambient light, clock display, and overall design. This video provides a visual guide to the product's functionality and aesthetic.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the speaker's surface. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in constant use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker for at least 2 hours. |
| No sound from speaker. | Volume is too low; device not connected; incorrect mode. | Increase volume on speaker and connected device. Ensure Bluetooth is paired or AUX cable is properly connected. Press 'M/Play' to select correct mode. |
| Bluetooth pairing fails. | Speaker not in pairing mode; device too far; interference. | Ensure speaker is in Bluetooth mode and flashing. Move device closer to speaker. Turn off other Bluetooth devices. Try unpairing and re-pairing. |
| Radio reception is poor. | Antenna not extended; weak signal. | Fully extend the radio antenna. Try repositioning the speaker for better signal. |
| Clock display is incorrect. | Time not set or reset. | Follow the clock setting instructions in the Operating section. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Wisoqu30hare7pvc-11 |
| Brand | Wisoqu |
| Speaker Type | Built-In |
| Wireless Communication Technology | Bluetooth 5.3 |
| Surround Sound Channel Configuration | 2.0 |
| Speaker Maximum Output Power | 5 Watts |
| Power Source | Battery Powered (Built-in 1200mAh) |
| Charging Time | 2 Hours |
| Control Method | Touch |
| Product Dimensions | 6.29"D x 5.51"W x 3.14"H |
| Item Weight | 1.15 pounds |
| Color | Black |
| Special Feature | Adjustable Ambient Light, Clock Display, Radio Function |
| Compatible Devices | Laptop, Smartphone, Tablet |
| Is Waterproof | False |
Warranty Information
This Wisoqu product comes with a limited warranty. Please refer to the product packaging or the official Wisoqu website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact Wisoqu customer service through the following channels:
- Email: Refer to your product packaging or the official Wisoqu website.
- Website: Wisoqu Official Store on Amazon
- Phone: Refer to your product packaging or the official Wisoqu website.
Please have your model number (Wisoqu30hare7pvc-11) and purchase date ready when contacting support.