SDLOGAL SDL-718-PI

SDLOGAL Wireless Over Ear Headphones

Model: SDL-718-PI

Introduction

This manual provides essential instructions for the proper use and maintenance of your SDLOGAL Wireless Over Ear Headphones. Please read this guide thoroughly before operating the device to ensure optimal performance and longevity.

Package Contents

  • SDLOGAL Wireless Over Ear Headphones
  • USB-C Charging Cable
  • 3.5mm Audio Cable
  • User Manual

Product Overview

The SDLOGAL Wireless Over Ear Headphones are designed for immersive audio experiences, featuring Bluetooth 5.4 connectivity, long battery life, and a comfortable, foldable design. They support both wireless and wired connections.

SDLOGAL Wireless Over Ear Headphones in Pink

Figure 1: SDLOGAL Wireless Over Ear Headphones (Pink)

Diagram of headphone controls and functions

Figure 2: Key Function Guide for Headphone Controls

Controls

  • Power Button: Long press for 3 seconds to turn on/off. Short press to play/pause. Double-tap for previous song. Triple-tap for next song.
  • M Button: Double-click to switch between Music Mode and Game Mode. Triple-click to turn LED lighting on/off.
  • Volume Slider: Slide up or down to adjust volume.

Setup

1. Charging the Headphones

  1. Locate the USB-C charging port on the headphone.
  2. Connect the provided USB-C charging cable to the headphones and a compatible USB power source.
  3. The LED indicator will show charging status. A full charge provides over 40 hours of playback.

2. Powering On/Off

  • To power on, long press the Power Button for approximately 3 seconds until the LED lights activate.
  • To power off, long press the Power Button for approximately 3 seconds.

3. Bluetooth Pairing

  1. Ensure the headphones are powered off.
  2. Long press the Power Button for 5 seconds to enter pairing mode. The LED indicator will flash, indicating it's ready to pair.
  3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  4. Select "SDLOGAL Headphones" from the list.
  5. Once connected, the LED indicator will stop flashing.

4. Wired Connection

  • Connect one end of the 3.5mm audio cable to the headphone's audio jack.
  • Connect the other end to your audio device's 3.5mm port.
  • The headphones can be used in wired mode even when the battery is depleted.
Image showing both wireless Bluetooth 5.4 and wired 3.5mm jack connection options

Figure 3: Wireless Bluetooth 5.4 and Wired Connection Options

Operating Instructions

Music Playback

  • Play/Pause: Short press the Power Button.
  • Next Track: Triple-tap the Power Button.
  • Previous Track: Double-tap the Power Button.

Call Management

  • Answer/End Call: Short press the Power Button.
  • Reject Call: Long press the Power Button.

Volume Control

  • Slide the Volume Slider up to increase volume.
  • Slide the Volume Slider down to decrease volume.

Switching Modes (Music/Game)

  • Double-click the M Button to toggle between Music Mode and Game Mode.
Image showing different sound modes: Music Mode, Wireless Mode, Game Mode, Wired Mode

Figure 4: Switching between Music and Game Modes

LED Lighting Control

  • Triple-click the M Button to turn the LED lights on or off.
Image showing headphones with LED lights on and off

Figure 5: Controllable LED Lighting Feature

Comfort and Design

The headphones feature high elastic sponge material and soft memory protein earmuffs for extended comfort. The adjustable headband ensures a secure and comfortable fit for various head sizes. The foldable and lightweight design allows for easy portability and storage.

Diagram illustrating soft memory earmuffs, adjustable headband, and 90-degree rotatable earcups

Figure 6: Comfort and Folding Features

Image demonstrating the compact, foldable, and lightweight design for easy storage

Figure 7: Compact, Foldable, and Lightweight Design

Battery Life

Equipped with low power consumption technology, these headphones offer over 40 hours of continuous music playback and more than 800 hours of standby time on a single full charge.

Image illustrating 40 hours of music time and 800 hours of standby time

Figure 8: Extended Battery Performance

Maintenance

  • Clean the earcups and headband regularly with a soft, dry cloth.
  • Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
  • Do not use abrasive cleaners or solvents.
  • Store in a cool, dry place when not in use.

Troubleshooting

No Power

  • Ensure the headphones are fully charged.
  • Long press the Power Button for 3 seconds to turn on.

Cannot Pair via Bluetooth

  • Ensure the headphones are in pairing mode (LED flashing).
  • Make sure Bluetooth is enabled on your device and it's within range (typically 10 meters).
  • Try forgetting the device on your phone's Bluetooth settings and re-pairing.

No Sound

  • Check the volume level on both the headphones and your connected device.
  • If using a wired connection, ensure the 3.5mm cable is securely plugged into both devices.
  • If using Bluetooth, ensure the headphones are properly paired and connected.

Specifications

Model NameSDL-718-PI
Connectivity TechnologyWireless (Bluetooth 5.4)
Battery Life40 Hours (Playback)
Standby Time800 Hours
Audio Driver TypeDynamic Driver
MaterialSponge, Memory Protein
Item Weight11.3 ounces
Special FeaturesFast Charging, Lightweight, Noise Cancellation, Controllable LED Lighting, Music & Game Modes
UPC721545538598

Official Product Videos

Video 1: Overview of SDLOGAL Wireless Over Ear Headphones by Shangyinghui-US. This video demonstrates the headphones' features and design.

Video 2: Demonstration of SYH US LYEJ Headphones by Shangyinghui-US. This video highlights the product's functionality and user experience.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official SDLOGAL website. Keep your purchase receipt for warranty claims.

Related Documents - SDL-718-PI

Preview SDLOGAL SDL-718 Wireless Headphones: User Manual and Specifications
Comprehensive user manual for the SDLOGAL SDL-718 Wireless Headphones. Find detailed information on setup, operation, safety guidelines, technical specifications, and FCC compliance.
Preview LÅNGDANS Roller Blind Assembly Instructions - IKEA
Detailed, step-by-step assembly instructions for the IKEA LÅNGDANS roller blind. Learn how to mount, trim, and install your roller blind with clear guidance and diagrams.
Preview Ulanzi Universal Cardioid Microphone: User Guide and Specifications
A comprehensive guide to the Ulanzi Universal Cardioid Microphone, covering features, specifications, connection instructions for smartphones and cameras, and troubleshooting tips for optimal audio recording.
Preview pi-top Inventor Guide: Learn to Code and Build with Raspberry Pi
Explore the pi-top Inventor Guide, a comprehensive resource for learning coding, robotics, and electronics using the Raspberry Pi. Discover projects for Music Maker, Smart Robot, and Space Race, with step-by-step instructions and challenges.
Preview Carrier SDL 6.30 New Features Guide
This guide details the new features and enhancements introduced in Carrier System Design Load (SDL) version 6.30, including improvements in building modeling, installation, air systems, space models, and problem fixes. It also covers data conversion and calculation result differences from previous versions.