FLEXISPOT EN2 Standing Desk User Manual

1. Introduction

The FLEXISPOT EN2 Whole-Piece Standing Desk is an electric height-adjustable desk designed to provide a versatile and ergonomic workspace. Featuring a robust frame, a spacious one-piece desktop, and integrated power solutions, this desk allows for seamless transitions between sitting and standing positions, promoting a healthier work routine. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your desk.

Figure 1.1: FLEXISPOT EN2 Standing Desk with integrated power strip and cable management.

2. Important Safety Information

Please read and understand all safety instructions before assembling or operating the desk. Failure to follow these instructions may result in injury or damage to the product.

• Always follow the assembly instructions carefully.
• Keep the work area clear of tripping hazards, especially when adjusting the desk height.
• Do not exceed the maximum weight limit of 176 pounds (80 kg).
• Ensure the desk is properly anchored to the floor to prevent tipping.
• Keep children and pets away from the desk during operation.
• Do not place hands or other objects near moving parts of the desk.
• Disconnect power before cleaning or performing maintenance.

3. Package Contents

Your FLEXISPOT EN2 Standing Desk will arrive in two separate packages, which may be shipped and delivered at different times. Please ensure you have received both packages before beginning assembly.

• Desktop (Whole-piece 60" x 24" Black Desktop)
• Desk Frame (White Frame)
• Digital Controller with 6 buttons and 4 memory presets
• Clamp Power Strip (3 AC outlets, 2 USB charging ports)
• Cable Management System
• Assembly Hardware and Tools (excluding electric drill)

Figure 3.1: The desk components are shipped in two separate packages.

4. Assembly Instructions

Assembly of the FLEXISPOT EN2 desk is straightforward, but it is recommended to have a second person for assistance, especially when handling the desktop. An electric drill (not included) may be helpful for some steps.

1. Unpack Components: Carefully remove all parts from both packages and lay them out on a clean, soft surface to prevent scratches. Verify all components listed in Section 3 are present.
2. Assemble Desk Frame: Follow the detailed instructions provided in the separate assembly guide to connect the desk legs, crossbar, and motor components. Ensure all screws are tightened securely.
3. Attach Desktop: Carefully place the desktop upside down on a soft surface. Align the assembled desk frame with the pre-drilled holes on the underside of the desktop. Secure the frame to the desktop using the provided screws. Note that some desktops may have multiple drill holes depending on the frame type; select the correct ones as per the assembly guide.
4. Install Power Strip: Attach the clamp power strip to the desired location on the back or side edge of the desktop. Ensure it is securely fastened.
5. Install Digital Controller: Mount the digital controller to the underside of the desktop in an easily accessible location.
6. Connect Wiring: Connect the motor, digital controller, and power strip to the control box as indicated in the assembly guide. Route cables neatly using the provided cable management system.
7. Flip Desk Upright: With assistance, carefully flip the assembled desk upright and place it in its desired location.
8. Initial Power-Up: Plug the desk into a grounded power outlet. The desk may perform an initial calibration cycle.

Figure 4.1: Components and features for assembly and organization.

5. Operating Instructions

5.1. Height Adjustment

The FLEXISPOT EN2 desk features a motorized height adjustment system. Use the up (^) and down (v) arrow buttons on the digital controller to smoothly adjust the desk height. The current height is displayed on the LED screen.

• Press and hold the ^ button to raise the desk.
• Press and hold the v button to lower the desk.
• The desk adjusts smoothly from 28.1 inches (71.4 cm) to 45.7 inches (116.1 cm).

5.2. Memory Presets

The digital controller features 4 programmable memory presets, allowing you to save and recall your preferred sitting and standing heights.

1. Set a Memory Preset: Adjust the desk to your desired height using the ^ or v buttons. Press the 'M' button, then press one of the numbered preset buttons (1, 2, 3, or 4) within 3 seconds. The display will show 'S-' followed by the number, indicating the height is saved.
2. Recall a Memory Preset: Simply press the corresponding numbered preset button (1, 2, 3, or 4). The desk will automatically move to the saved height.

Figure 5.1: Digital controller with height display and memory presets.

5.3. Removable Desktop Power Outlet

The integrated clamp power strip provides convenient access to power for your electronic devices.

• It includes 3 AC outlets (125V/12A) and 2 USB charging ports (5V/2A).
• The power strip can be clipped to the back or side of your desk.
• Maximum output is 1500W.

Figure 5.2: Integrated power strip for convenient charging.

5.4. Cable Management

The desk includes a cable management system to help keep your workspace tidy and organized, reducing clutter and potential hazards.

Figure 5.3: Effective cable management for a cleaner workspace.

5.5. Smart Anti-Collision System

The desk is equipped with a smart anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage or injury.

6. Maintenance and Care

Proper care will ensure the longevity and continued performance of your FLEXISPOT EN2 Standing Desk.

• Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Cable Management: Ensure cables are properly routed and not pinched or tangled, which could affect desk operation or cause damage.
• Weight Limit: Do not overload the desk beyond its maximum weight capacity of 176 pounds (80 kg).

7. Troubleshooting

If you encounter issues with your FLEXISPOT EN2 Standing Desk, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.

8. Specifications

Figure 8.1: Key dimensions and features of the FLEXISPOT EN2 desk.

9. Warranty and Support

FLEXISPOT stands behind the quality of its products. Your EN2 Standing Desk comes with the following warranty coverage:

• 5-Year Warranty: Applies to frames, motors, and other mechanical devices.
• 2-Year Warranty: Applies to controllers, switches, and electronics.

This warranty covers defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions regarding your FLEXISPOT EN2 Standing Desk, please contact FLEXISPOT customer service. You can typically find contact information on the FLEXISPOT official website or through your purchase platform.

Note: No official product videos with 'Seller' creator type and 'preview' in filename were available in the provided data to embed.