La-Z-Boy Symphony Executive Mid-Back Office Chair Instruction Manual

Introduction

This manual provides essential information for the assembly, operation, maintenance, and care of your La-Z-Boy Symphony Executive Mid-Back Office Chair. Please read these instructions thoroughly before assembly and use to ensure proper function and longevity of your chair.

Safety Information

• Always follow assembly instructions carefully.
• Do not stand on the chair.
• Do not use the chair if any components are damaged or missing.
• Ensure all bolts and screws are tightened securely before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight recommendation of 275 pounds.
• Keep hands and feet clear of moving parts during adjustment.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

Image: Quick and Easy Assembly. This image illustrates the ease of assembly and provides customer service contact details for assistance.

Assembly Instructions

Assembly is required. A hardware kit is included with your chair. Follow the provided instructions for a simple and quick assembly process. Typically, assembly can be completed in approximately 30 minutes.

1. Unpack all components and lay them out on a clean, soft surface to prevent scratching.
2. Attach the casters to the chair base.
3. Insert the gas lift cylinder into the center of the base.
4. Attach the seat plate mechanism to the underside of the seat cushion.
5. Connect the backrest to the seat assembly.
6. Attach the armrests to the seat and backrest.
7. Place the assembled seat onto the gas lift cylinder.
8. Ensure all connections are secure before use.

Operating Instructions

Your La-Z-Boy Symphony Executive Mid-Back Office Chair features several adjustments for personalized comfort.

Height Adjustment

To adjust the chair height, locate the accented fingertip control lever on the right side of the chair. Lift this lever upwards to raise or lower the seat to your desired position. Release the lever to lock the height.

Image: Height Customization. This image demonstrates how to use the lever on the right side of the chair to adjust the seat height.

Recline and Tilt Adjustment

The chair offers a recline function for relaxation. To recline, locate the lever on the left side of the chair. Flip this lever upwards to allow the backrest to recline. To adjust the tension of the recline, twist the knob located beneath the seat. Flip the lever downwards to lock the chair in an upright or reclined position.

Image: Recline Relaxation. This image illustrates the controls for adjusting the recline and tilt tension of the chair.

Swivel and Mobility

The chair features a sturdy metal base with 360-degree smooth-rolling dual casters, allowing for easy movement and swiveling across most carpeted surfaces.

Image: Elegant Sloped Armrests and Mobility. This image highlights the design of the armrests and the functionality of the 360-degree swivel casters.

Maintenance and Care

Proper care will help maintain the appearance and extend the life of your bonded leather office chair.

• Cleaning: For general cleaning, wipe the bonded leather surface with a soft, damp cloth. For tougher spots, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading and drying of the material.
• Inspection: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as needed.

Troubleshooting

If you encounter any issues with your chair, refer to the following common solutions:

• Chair wobbles: Ensure all screws and bolts are securely tightened. Check that the casters are properly inserted into the base.
• Height adjustment not working: Verify that the gas lift cylinder is correctly installed and not obstructed. Ensure the height adjustment lever is fully engaged.
• Recline not functioning: Check that the recline lever is in the unlocked position. Adjust the tension knob beneath the seat if the recline is too stiff or too loose.
• Casters not rolling smoothly: Check for any debris (hair, lint) caught in the caster wheels. Clean as necessary.

For persistent issues, contact customer support.

Specifications

Image: Product Dimensions. This image provides a visual representation of the chair's measurements.

Image: Superior Quality. This image emphasizes the chair's robust construction and adherence to safety standards.

Warranty and Support

La-Z-Boy is committed to providing quality products. For any questions regarding assembly, operation, or parts, please contact our dedicated U.S. based customer support team.

• Customer Service Phone: (800) - 379 - 9773
• Hours: 6am - 5pm PST