Product Overview
The MiiCoffee PT1 Portable Electric Burr Coffee Grinder V2 is a compact and efficient device designed for coffee enthusiasts. This new version features a larger capacity of 30g, a magnetic ground jar for easy access, and a top-loading design to minimize movable components. Constructed with a durable aluminum body and stainless steel conical burrs, it ensures consistent and uniform grinding for various brewing methods, including espresso, pour-over, and French press. With 80 click adjustments, users can precisely control their grind size. The built-in 800mAh battery provides 20 to 30 grinds per charge and supports USB-C fast charging. Its fully disassemblable design makes cleaning convenient, and a cleaning brush is included for maintenance.
Important Safety Information
- Read all instructions before using the appliance.
- Do not immerse the motor unit in water or other liquids. Clean only with a damp cloth.
- Keep hands and utensils out of the bean hopper during operation to prevent injury.
- Ensure the grinder is unplugged before cleaning or when not in use.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not operate the grinder with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Use only attachments recommended or sold by the manufacturer.
- Do not use outdoors.
Components and What's Included
- MiiCoffee PT1 Electric Burr Coffee Grinder V2 (Main Unit)
- USB-C Charging Cable
- Cleaning Brush
Image: The MiiCoffee PT1 Portable Electric Burr Coffee Grinder V2 shown with its USB-C charging cable and the stainless steel conical burr.
Setup
- Initial Charge: Before first use, fully charge the grinder using the provided USB-C cable. The indicator light will show charging status.
Image: The grinder highlighting its compact dimensions and USB-C charging capability.
- Assemble the Grinder: Ensure the magnetic ground jar is securely attached to the main body of the grinder.
Image: The assembled MiiCoffee PT1 grinder positioned on a wooden surface, ready for use.
Operating Instructions
- Adjust Grind Size:
The grinder offers 80 click adjustments for precise grind size control. To adjust, remove the magnetic ground jar. Locate the adjustment dial at the bottom of the main unit. Turn the dial towards 'FINE' for finer grinds (e.g., espresso) or towards 'COARSE' for coarser grinds (e.g., French press). Each click represents a specific adjustment.
Image: A detailed view of the MiiCoffee PT1's grind adjustment mechanism, showing 'FINE' and 'COARSE' settings.
Image: A close-up of the durable stainless steel conical burrs, responsible for consistent grinding.
- Add Coffee Beans: Open the top lid of the grinder. Pour up to 30g of whole coffee beans into the bean hopper. Close the lid securely.
- Start Grinding: Press the power button located on the side of the grinder to begin grinding. The grinder will automatically stop once all beans have been processed.
- Collect Ground Coffee: Once grinding is complete, remove the magnetic ground jar from the bottom of the grinder. The freshly ground coffee will be collected inside.
Image: The MiiCoffee PT1 grinder with its magnetic ground jar detached, revealing the freshly ground coffee inside.
Watch the Grinder in Action:
Video: An official demonstration of the MiiCoffee PT1 Portable Electric Burr Coffee Grinder V2, showcasing its features and operation. (Duration: 1 minute 12 seconds)
Maintenance and Cleaning
- Disassembly: The PT1 grinder can be fully disassembled for thorough cleaning. Gently twist and pull apart the sections as shown in the diagram.
Image: The MiiCoffee PT1 grinder separated into its primary parts for cleaning access.
- Cleaning Burrs and Chamber: Use the provided cleaning brush to remove any residual coffee grounds from the conical burrs and the grinding chamber.
- Wipe Down: Wipe the exterior of the grinder with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
- Reassembly: Ensure all parts are dry before reassembling the grinder. Align the components and gently twist them back into place until secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grinder not turning on. | Low battery or not charged. | Charge the grinder fully using the USB-C cable. |
| Grinder stops during operation. | Beans jammed or low battery. | Clear any jammed beans using the cleaning brush. Ensure sufficient charge. |
| Inconsistent grind size. | Burrs may be dirty or adjustment is incorrect. | Clean the burrs thoroughly. Re-adjust grind setting. |
| Magnetic ground jar detaches easily. | Magnets may be loose or damaged. | Contact customer support if magnets are damaged. Ensure proper alignment when attaching. |
Specifications
- Brand: MiiCoffee
- Model: PT2
- Dimensions: 2.48"L x 2.48"W x 7.87"H
- Capacity: 30 grams (coffee beans)
- Burr Type: Stainless Steel Conical Burrs
- Grind Adjustments: 80 Clicks
- Battery: Built-in 800mAh Lithium Ion (included)
- Charging: USB-C (5 Volts)
- Construction: Aluminum Body, Stainless Steel Internals
- Item Weight: 2.83 pounds
Warranty and Support
MiiCoffee provides a full 1-year warranty from the US for this product. For any warranty claims, technical support, or inquiries, please contact MiiCoffee customer service through their official website or the platform where the product was purchased. Please have your proof of purchase and product model number (PT2) ready when contacting support.
For more information and support, visit the official MiiCoffee Store: MiiCoffee Amazon Store
