Stanley SFMPW200060-B5 1800W Brushless Corded Pressure Washer User Manual

1. Introduction

Thank you for choosing the Stanley SFMPW200060-B5 1800W Brushless Corded Pressure Washer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pressure washer. Please read this manual thoroughly before first use and keep it for future reference.

1.1 General Safety Information

• Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, and sturdy footwear.
• Ensure the power supply matches the specifications on the product label.
• Never point the spray gun at people, animals, or electrical equipment.
• Keep children and pets away from the operating area.
• Disconnect the power supply before performing any maintenance or cleaning.

2. Product Features

The Stanley SFMPW200060-B5 pressure washer is designed for powerful and efficient cleaning tasks. Key features include:

• 1800 W Brushless Motor: Provides powerful and efficient cleaning performance with enhanced durability and reduced maintenance.
• High Flow Rate: A maximum flow rate of 7.6 liters per minute ensures fast cleaning over large areas.
• High Pressure: Delivers up to 135 Bar (1950 PSI) max pressure for effective removal of stubborn dirt.
• 6-Meter Hose: Offers extended reach and flexibility during operation.
• Aluminum Pump: Designed for greater durability and reduced maintenance.
• Moisture & Dust Protection: Features sealed modules and drain holes to protect internal components from environmental elements.
• Self-Priming Function: Capable of drawing water from alternative sources like buckets or tanks, ideal for locations with low water pressure or no access to main water supply.

Image: The Stanley SFMPW200060-B5 pressure washer, with callouts indicating its brushless motor, aluminum pump, and self-priming capability.

3. Package Contents

Please check the package for the following items. If any parts are missing or damaged, contact your retailer.

• Stanley SFMPW200060-B5 Pressure Washer Unit
• 6-Meter High Pressure Hose
• Spray Gun
• Lance
• Foam Producer Bottle
• Turbo Rotating Nozzle
• Adjustable (Fan-Pencil) Nozzle
• Transparent Water Inlet Filter
• Universal Hose Adaptor
• Nozzle Cleaning Tip

Image: The Stanley SFMPW200060-B5 pressure washer shown alongside its various accessories, including hoses, nozzles, and the foam bottle.

4. Setup

4.1 Assembly

1. Unpack all components and ensure they are free from damage.
2. Attach the high-pressure hose to the pressure washer unit and the spray gun. Ensure connections are secure.
3. Select the desired nozzle (e.g., adjustable or turbo rotating) and attach it to the lance, then connect the lance to the spray gun.
4. If using the foam producer bottle, fill it with appropriate detergent and attach it to the spray gun.

Image: A user demonstrating the attachment of the foam producer bottle to the pressure washer's spray gun.

4.2 Water Connection

1. Connect a garden hose (not supplied) to the water inlet of the pressure washer using the universal hose adaptor.
2. Ensure the transparent water inlet filter is clean and properly installed.
3. Connect the other end of the garden hose to a water supply.
4. Turn on the water supply fully.
5. Before plugging in the power, squeeze the trigger on the spray gun to purge air from the system until a steady stream of water emerges. This primes the pump.

4.3 Power Connection

Plug the power cord into a suitable grounded electrical outlet. Ensure the outlet meets the power requirements of the pressure washer (220-240V).

5. Operating Instructions

5.1 Starting the Pressure Washer

1. Ensure all connections are secure and the water supply is on.
2. Turn the ON/OFF switch on the pressure washer to the 'ON' position.
3. Point the spray gun at the cleaning surface and squeeze the trigger to begin spraying.

5.2 Using Nozzles

• Adjustable (Fan-Pencil) Nozzle: Allows you to vary the spray pattern from a wide fan for general cleaning to a concentrated pencil jet for stubborn dirt. Rotate the nozzle head to adjust.
• Turbo Rotating Nozzle: Creates a powerful, oscillating jet for maximum cleaning impact on tough stains and large areas.

5.3 Using the Foam Producer Bottle

1. Fill the foam producer bottle with a suitable pressure washer detergent.
2. Attach the bottle to the spray gun.
3. Spray the detergent onto the surface to be cleaned. Allow it to dwell for a few minutes (refer to detergent instructions) before rinsing with a high-pressure spray.

5.4 Shutting Down

1. Turn the ON/OFF switch to the 'OFF' position.
2. Turn off the water supply.
3. Squeeze the spray gun trigger to release any remaining pressure in the system.
4. Disconnect the power cord.
5. Disconnect the water hose and high-pressure hose.

6. Maintenance

6.1 Cleaning the Water Inlet Filter

Regularly check and clean the transparent water inlet filter to prevent debris from entering the pump. Remove the filter, rinse it under running water, and reinsert it.

6.2 Nozzle Cleaning

If the nozzle becomes clogged, use the provided nozzle cleaning tip to clear any obstructions. Always disconnect the power and water supply before cleaning nozzles.

6.3 Storage

• Drain all water from the pump, hoses, and spray gun to prevent freezing damage in cold weather.
• Store the pressure washer in a dry, frost-free location.
• Coil the high-pressure hose and power cord neatly.

7. Troubleshooting

8. Specifications

9. Product Videos

No official product videos from the seller are available for this specific Stanley SFMPW200060-B5 pressure washer in the provided data.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Stanley customer service directly. Keep your proof of purchase for warranty claims.