Introduction
This manual provides essential instructions for the safe and efficient assembly, operation, and maintenance of your MERITLINE Queen Murphy Bed with Desk. This innovative furniture piece offers a space-saving solution, combining a comfortable queen-size bed with a functional desk, ideal for multi-purpose rooms.
Please read this manual thoroughly before beginning assembly or use. Keep it for future reference.
Safety Information
- Assembly: Always assemble and disassemble the bed carefully to avoid injury. It is recommended that two adults perform the assembly.
- Weight Capacity: Do not exceed the maximum weight capacity of 600 lbs for the bed.
- Operation: Be cautious when folding and unfolding the bed to prevent tip-overs or accidental deployment/retraction. Ensure the area around the bed is clear before operating.
- Wall Mounting: This Murphy bed unit must be securely anchored to a wall to ensure stability and prevent tipping. Failure to do so can result in serious injury.
- Mattress: Use a mattress with a thickness between 8-10 inches. A box spring is not required.
- Children and Pets: Keep children and pets away from the unit during operation to prevent accidents.
Package Contents
Before assembly, verify that all components are present and undamaged. Refer to the detailed parts list provided in the separate assembly instruction manual included with your product.
- Main Cabinet Panels (various sizes)
- Bed Frame Components
- Desk Components
- Hardware Kit (screws, bolts, cam locks, wall anchors, etc.)
- Assembly Instruction Manual
Setup and Assembly
Assembly of the MERITLINE Queen Murphy Bed with Desk typically requires approximately one hour with two adults. A detailed, step-by-step assembly instruction manual with illustrations is included in your product packaging. Please follow those instructions precisely.
General Assembly Steps:
- Unpack and Organize: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided labels and the parts list.
- Assemble Cabinet Structure: Begin by assembling the main cabinet frame according to the instructions. Ensure all connections are secure.
- Install Bed Frame Mechanism: Attach the bed frame components and the dual piston system to the cabinet. Pay close attention to the orientation of parts.
- Attach Desk: Secure the desk surface and its supports to the cabinet.
- Wall Mounting: This is a critical step. Securely anchor the assembled unit to a sturdy wall using the provided hardware. Locate wall studs for optimal security.
- Final Checks: Once assembled, ensure all screws and fasteners are tightened. Test the folding and unfolding mechanism carefully before placing a mattress.

Image: Dimensions diagram for the MERITLINE Queen Murphy Bed with Desk, illustrating measurements for both the cabinet and the deployed bed frame.
Operating Instructions
Using the Desk:
When the Murphy bed is in its upright, closed position, the integrated desk is fully accessible. The desk provides a stable surface for work or study.

Image: The MERITLINE Murphy Bed in its cabinet configuration, featuring the integrated desk ready for use with a laptop and decorative items.

Image: A detailed view of the desk area, highlighting its functionality with a laptop and a small plant.
Deploying the Bed:
- Clear the Area: Ensure there are no obstructions in front of the cabinet where the bed will deploy.
- Unlock (if applicable): If your unit has a locking mechanism, disengage it.
- Lower the Bed: Gently pull the bed frame downwards from the top. The dual piston system is designed to assist in a smooth, controlled descent. The bed will automatically fall into place once it reaches a certain angle.
- Position Legs: Ensure the support legs are fully extended and locked into position for stability.

Image: The MERITLINE Murphy Bed fully open, showcasing the queen-size bed with a mattress and bedding.

Image: The internal bed frame structure of the Murphy bed, featuring wooden slats for mattress support.
Folding the Bed:
- Remove Bedding: For easier folding, remove heavy bedding or pillows that might obstruct the mechanism.
- Retract Legs: Fold the support legs back into their stored position.
- Lift the Bed: Grasp the bed frame and gently lift it upwards. The dual piston system will assist in raising the bed smoothly back into the cabinet.
- Secure: Ensure the bed is fully retracted and, if applicable, engage any locking mechanisms to keep it securely closed.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the wood finish.
- Hardware Check: Periodically inspect all screws, bolts, and fasteners to ensure they remain tight. Tighten any loose hardware to maintain stability and safety.
- Mechanism Inspection: Check the dual piston system and hinges for smooth operation. If any squeaking or stiffness occurs, a small amount of silicone-based lubricant can be applied to moving parts (avoid oil-based lubricants on wood).
- Wall Anchors: Regularly verify that the wall anchors are secure and the unit remains firmly attached to the wall.
Troubleshooting
- Bed is difficult to fold/unfold:
Solution: Check for obstructions. Ensure the dual piston system is correctly installed and functioning. Verify all hardware is tightened. The mattress may be too heavy or too light for the piston system; ensure it is within the recommended 8-10 inch thickness. - Unit feels unstable or wobbly:
Solution: Re-check all wall anchors and ensure the unit is securely fastened to wall studs. Tighten all assembly hardware. Ensure the floor is level. - Desk surface is uneven:
Solution: Inspect the desk supports and their attachment points. Ensure all screws are tight and components are correctly aligned. - Missing or damaged parts:
Solution: Do not proceed with assembly. Contact customer service immediately for replacement parts.
Specifications
| Brand | MERITLINE |
| Model Number | B0DHZDCL1N |
| UPC | 198573928347 |
| Color | White |
| Size | Queen |
| Product Dimensions (L x W x H) | 68 x 15.7 x 87.7 inches |
| Frame Material | Pine wood + MDF |
| Weight Capacity | 600 LBS |
| Mattress Thickness Compatibility | 8-10 inches (no box spring required) |
| Assembly Required | Yes (2 adults recommended) |
Warranty and Support
For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. MERITLINE is committed to customer satisfaction.
If you encounter any problems with your MERITLINE Queen Murphy Bed with Desk, require assistance with assembly, or have questions regarding its operation or maintenance, please do not hesitate to contact our customer service. We aim to respond to all inquiries within 24 hours.
Customer Service Contact: Refer to your purchase documentation or the MERITLINE official website for the most current contact information.