Introduction
Thank you for choosing the TheiaMo Arched LED Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions thoroughly before installation and keep them for future reference.
This mirror features a modern arched design with a brushed gold aluminum frame, offering both front and backlit illumination. Key functionalities include dimmable lighting with three color temperature options, an anti-fog function, and a waterproof design suitable for bathroom environments. It can be installed via plug-in or hardwired connection.
Safety Information
- Electrical Safety: Ensure power is disconnected at the circuit breaker before any installation or maintenance. All electrical work should be performed by a qualified electrician, especially for hardwired installations.
- Handling: Handle the mirror with care. The glass is tempered and explosion-proof, designed to break without splashing debris, but improper handling can still cause damage or injury.
- Environment: This mirror is designed for wet bathroom environments with an IP65 waterproof rating. However, avoid direct water spray onto electrical components.
- Frame Color Note: The brushed gold frame may exhibit variations in metallic luster (gold, orange, copper, rose gold) depending on lighting conditions and production batches. Please refer to product images and videos for visual reference before installation.
Package Contents
Please verify that all components are present and undamaged before proceeding with installation.
- TheiaMo Arched LED Bathroom Mirror Unit
- Mounting Hardware (screws, drywall anchors)
- Instruction Manual (this document)
Setup and Installation
The mirror offers two installation options: plug-in or hardwired. For hardwired installation, it is recommended to consult a professional electrician.
Mounting Options and 3-Step Installation
Figure 1: Mounting Options and Installation Guide
Choose between hardwired connection to a wall switch or plug-in to a standard outlet. Follow the three steps for secure mirror mounting.
- Drill Holes and Install Wall Anchors: Use a level to mark the desired mounting points. Drill holes and insert the provided wall anchors.
- Screw the Two Screws to the Wall: Insert screws into the wall anchors, leaving a small gap for the mirror's mounting brackets.
- Hang the Mirror onto the Screws: Carefully align the mirror's mounting brackets with the screws and hang the mirror securely. Ensure the mirror is approximately 0.2 inches away from the wall for optimal lighting effect.
For hardwired connections, ensure the power supply is off before connecting the mirror's wires to your home's electrical system. If you are unsure, please consult a certified electrician.
Operating Instructions
Your TheiaMo LED Bathroom Mirror is equipped with smart touch controls for easy operation.
Light Control (Dimmable & 3 Color Temperatures)
The mirror features a touch button to control the lighting. The mirror has a brightness memory function that automatically records your last settings.
- Change Color Temperature: Short press the round button for approximately 3 seconds to cycle through three color temperatures: 6000K (Cool White), 4500K (Natural White), and 3000K (Warm White).
- Adjust Brightness: Long press the round button to adjust the brightness from 10% to 100%. Release when the desired brightness is achieved.
Figure 2: Light Control Functions
Short press to change color temperature, long press to adjust brightness.
Anti-Fog Function
Activate the anti-fog feature with a single touch to ensure a clear reflection, especially after showering.
- Activate Anti-Fog: Touch the dedicated anti-fog button (often indicated by a wavy icon) to turn the defogger on or off.
Figure 3: Anti-Fog Operation
The anti-fog feature clears a section of the mirror for immediate use.
Product Overview Video
Video 1: TheiaMo Arched LED Bathroom Mirror Overview
This video demonstrates the mirror's features, including light control, anti-fog function, and design details.
Maintenance
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the electrical components.
- Cleaning the Frame: Wipe the brushed aluminum frame with a soft, dry cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
- Inspection: Periodically check the electrical connections and mounting hardware for any signs of wear or loosening.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply; loose connection; faulty switch. | Check if the power outlet or circuit breaker is active. Ensure all electrical connections are secure. If hardwired, verify the wall switch is functional. |
| Anti-fog function is not working. | Anti-fog feature not activated; electrical issue. | Ensure the anti-fog button has been pressed. Check power supply to the mirror. |
| Lights are flickering or dim. | Low power; loose connection; LED strip issue. | Verify stable power supply. Check connections. If issues persist, contact customer support. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact TheiaMo customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | TheiaMo |
| Model | Arched LED Bathroom Mirror |
| Product Dimensions | 20"L x 30"W |
| Shape | Arched |
| Frame Material | Aluminum |
| Frame Color | Gold (Brushed Finish) |
| Mirror Material | 5mm HD Eco-friendly Copper-free Silver Glass |
| Special Feature | Explosion Proof, Anti-Fog, Dimmable, 3 Color Temperatures (6000K, 4500K, 3000K) |
| Lighting | Frontlit & Backlit (120 LEDS/M high lumen light bar) |
| LED Lifespan | Over 50,000 hours |
| Waterproof Rating | IP65 |
| Mounting Type | Wall Mount (Plug-in or Hardwired) |
| Item Weight | 19.81 pounds |
| Assembly Required | Yes (Installation) |
| Certifications | UL Listed (for LED driver) |
Warranty and Support
- Warranty: TheiaMo provides a 2-year warranty covering structural integrity and manufacturing defects.
- Return-Free Replacement: For damaged items, please send photos to customer support for immediate new shipment.
- Customer Support: For any product inquiries, technical assistance, or warranty claims, please contact TheiaMo customer support. We offer 24/7 dedicated support.
- Contact Information: Please refer to your purchase documentation or the official TheiaMo website for the most current contact details.
Figure 4: TheiaMo Support and Quality Assurance
Details on warranty, replacement policy, and customer support availability.
