Fancii 20x Magnifying Makeup Mirror with LED Lights

Introduction

Thank you for choosing the Fancii 20x Magnifying Makeup Mirror with LED Lights. This mirror is designed to provide precise magnification and optimal illumination for detailed tasks such as makeup application, skincare, and tweezing. Its rechargeable battery, adjustable light settings, and strong suction cup offer convenience and versatility for use at home or while traveling.

Package Contents

• Fancii 20x Magnifying Makeup Mirror
• USB-C Charging Cable
• User Manual

Safety Information

• Do not immerse the mirror in water or other liquids.
• Keep the mirror away from direct sunlight to prevent fire hazards due to magnification.
• Do not attempt to disassemble or repair the mirror yourself. Contact customer support for assistance.
• Use only the provided USB-C charging cable or a certified equivalent.
• Keep out of reach of children.

Product Features

• 20x Precision Magnification: Ideal for detailed tasks.
• 3 Studio-Grade Light Settings: Soft white, neutral, and natural daylight for optimal illumination.
• Seamless Dimming Tech: Adjust brightness effortlessly.
• USB Rechargeable: Provides up to 13 hours of consistent light on a full charge.
• Easy-Lock Suction Mechanism: Securely attaches to smooth surfaces.
• 360-Degree Rotation: Allows for flexible viewing angles.

Figure 1: Overview of mirror features including touch sensor, 360-degree rotation, LED lights, and suction cup.

Setup

1. Attaching the Mirror

1. Ensure the surface (e.g., mirror, marble, ceramic, porcelain) is clean, dry, and smooth.
2. Press the suction cup firmly against the desired surface.
3. Twist the base of the mirror clockwise to engage the Easy-Lock Suction Mechanism and secure the mirror in place.
4. To remove, twist the base counter-clockwise to release the suction, then gently pull the tab on the suction cup.

Figure 2: Demonstrating the secure attachment of the mirror using its suction cup.

2. Charging the Mirror

1. Locate the USB-C charging port on the back of the mirror.
2. Connect the provided USB-C charging cable to the mirror and plug the other end into a compatible USB power source (e.g., wall adapter, computer).
3. The indicator light will show charging status (refer to product for specific light behavior). A full charge provides up to 13 hours of light.

Figure 3: Charging the mirror via its USB-C port.

Operating Instructions

1. Power On/Off and Light Settings

1. Locate the touch sensor power button on the mirror's surface.
2. Tap the touch sensor once to turn on the LED lights.
3. Tap repeatedly to cycle through the 3 light settings: Soft White, Neutral, and Natural Daylight.
4. Tap and hold the touch sensor to turn off the lights.

Figure 4: The three available light settings for various environments.

2. Adjusting Brightness (Seamless Dimming)

• While the lights are on, press and hold the touch sensor button. The brightness will gradually increase or decrease.
• Release the button when the desired brightness level is reached.

3. Adjusting Viewing Angle

• The mirror features a 360-degree adjustable swivel joint. Gently rotate the mirror head to achieve your preferred viewing angle.

Figure 5: The 20x magnification provides extreme detail for precision tasks.

Maintenance

• To clean the mirror surface, gently wipe with a soft, lint-free cloth. For stubborn spots, dampen the cloth with water or a mild glass cleaner.
• Avoid using abrasive cleaners or harsh chemicals, as these can damage the mirror or its finish.
• Ensure the mirror is completely dry before storing or using.
• Store the mirror in a cool, dry place when not in use.

Troubleshooting

Lights Not Turning On

• Check Battery: Ensure the mirror is charged. Connect the USB-C cable and allow it to charge for at least 30 minutes.
• Reset: Try pressing and holding the touch sensor for 5-10 seconds to reset.

Suction Cup Not Holding

• Clean Surface: Ensure the mounting surface is completely clean, dry, and smooth. Any dust, dirt, or moisture can prevent proper suction.
• Re-apply: Press the suction cup firmly against the surface and twist the base clockwise until secure.
• Surface Type: The suction cup works best on non-porous, smooth surfaces like glass, glazed tiles, or polished marble. It may not adhere well to textured or porous surfaces.

Mirror Appears Distorted

• Viewing Distance: Due to the 20x magnification, you must be very close to the mirror (typically within a few inches) for a clear, non-distorted image. This is normal for high-magnification mirrors.

Specifications

Warranty Information

Fancii products are manufactured to high-quality standards. For detailed warranty information, including coverage and duration, please refer to the warranty card included with your product or visit the official Fancii website. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, concerns, or require assistance with your Fancii 20x Magnifying Makeup Mirror, please contact Fancii customer support. Contact details can typically be found on the official Fancii website or on the product packaging.