Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your HR Huare Technology Range Hood Filter Replacement, Model HRT05. Adhering to these instructions will ensure optimal performance and longevity of your filter. Please read this manual thoroughly before use.
Product Overview
Key Features
- 3-Layer Aluminum Grease Filter: Constructed from high-quality aluminum with a 3-layer metal wire weaving to effectively capture grease and purify kitchen air.
- Enhanced Filtration: The patented middle layer with wavy aluminum mesh increases the attachment area for superior grease absorption.
- Water Outlet Design: Features a water outlet on the left and right frames to prevent sewage from remaining in the product during washing, accelerating the outflow of washing residue.
This image illustrates the advanced 3-layer aluminum mesh design of the filter, engineered to effectively capture grease and purify kitchen air.
This image highlights the innovative water outlet design, which facilitates efficient drainage during washing and prevents residue buildup. It also indicates the filter is suitable for dishwasher cleaning.
Compatibility
This filter is designed as a replacement for Vissani-WA0575 and other compatible 30-inch pyramid wall mount range hoods. It is crucial to verify the dimensions of your existing filter to ensure a proper fit. This filter is not universal.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | HRT05 |
| Dimensions (L x W x H) | 14.41 x 13.54 x 0.35 inches (366 x 344 x 9 mm) |
| Material | Aluminum |
| Quantity | 2 PCS |
| Compatible Device | Range Hood |
This image displays the precise dimensions of the filter: 13.54 inches (344mm) by 14.41 inches (366mm) with a thickness of 0.35 inches (9mm). Accurate measurement of your existing filter is crucial for proper fit.
This video provides a detailed guide on measuring the three critical dimensions of a range hood filter, including width, length, and the spacing of the locating tabs, to ensure correct replacement.
Setup & Installation
Installation of the HRT05 range hood filter is designed to be simple and requires no special tools.
Pre-Installation Checklist
- Ensure the range hood is turned off and disconnected from power.
- Verify the dimensions of the new filter match your existing filter and range hood opening.
- Locate and remove the blue protective film from the new filter before installation.
This image shows the blue protective film on the filter, which must be removed before installation to prevent scratches during transit.
Installation Steps
- Remove Old Filter: Locate the release tabs or clips on your existing range hood filter. Gently press or pull these tabs to disengage the old filter and carefully remove it.
- Prepare New Filter: Ensure the blue protective film has been completely removed from the new HRT05 filter.
- Insert New Filter: Align the new filter with the opening in the range hood. Push the filter into place until the release tabs or clips engage securely. Ensure the filter sits flush and is firmly held.
- Test: Restore power to the range hood and test its operation to confirm proper airflow and filter seating.
This video demonstrates the step-by-step process of replacing a WA0575 range hood filter, showing how to remove the old filter and install the new one securely.
This video illustrates the general procedure for replacing the range hood filter, highlighting key steps for a smooth and effective exchange.
Maintenance & Cleaning
Regular cleaning of your range hood filters is essential to maintain optimal air purification and prevent grease buildup. Clean filters ensure efficient operation of your range hood.
Cleaning Instructions
- Remove Filters: Disengage the filters from the range hood by pressing the release tabs.
- Choose Cleaning Method:
- Hand Washing: Soak filters in warm, soapy water (using dishwashing liquid) for approximately 10 minutes. Scrub gently with a brush or scourer until clean. Rinse thoroughly with clean water.
- Dishwasher: Place filters in the dishwasher on a hot cycle for convenient cleaning.
- Dry Completely: Ensure filters are completely dry before re-installing them into the range hood.
- Re-install: Slide the clean, dry filters back into their slots in the range hood until they click securely into place.
This video provides instructions on how to clean and maintain WA0575 range hood filters, ensuring optimal performance and longevity.
This image shows the filter placed in a dishwasher, demonstrating the convenience of machine washing for thorough cleaning.
Troubleshooting
If you encounter issues with your range hood filter, consider the following common troubleshooting steps:
- Poor Fit: Double-check that the filter dimensions (length, width, and locating tab spacing) precisely match your range hood's requirements. Refer to the "Specifications" section and measurement video.
- Reduced Airflow: Ensure the filters are clean and free of excessive grease buildup. Clogged filters can significantly reduce the range hood's effectiveness.
- Filter Not Securing: Verify that the filter is correctly aligned and the release tabs are fully engaged. Improper seating can prevent the filter from staying in place.
- Protective Film: Confirm that all blue protective film has been removed from the filter before installation.
If problems persist after checking these points, please contact customer support.
Warranty & Support
We stand by the quality of our products. We provide a 100% after-sale guarantee. If for any reason you are not completely satisfied, please contact us through Amazon. We are committed to replying within 24 hours and providing the best service.
For further assistance or to report an issue, please visit our official Amazon store page or contact us directly via the Amazon messaging system.
