1. Product Overview
This manual provides instructions for the HOMCOM 3-Piece Rectangular Dining Table Set, designed for small spaces. The set includes one dining table with a tempered glass top and two matching high-back chairs.
- Table: Rectangular, tempered glass top, robust steel frame.
- Chairs: Two high-back chairs with synthetic padded seats and faux leather upholstery.
- Design: Space-saving, chairs can be stored under the table.
Image 1.1: The HOMCOM Dining Table Set in white, featuring a glass top table and two chairs.
2. Safety Information
Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Always ensure the table and chairs are stable before use.
- Do not exceed the recommended weight capacity for the table (110 lbs / 50 kg) and chairs (265 lbs / 120 kg).
- Keep small parts away from children during assembly.
- Avoid placing hot items directly on the glass surface without protection.
- Do not stand on the table or chairs.
- Regularly check all fasteners to ensure they remain tight.
3. Assembly Instructions
Assembly is required for this dining set. It is recommended to have two people for assembly. Ensure all components are present before beginning.
3.1. Unpacking and Component Check
- Carefully unpack all components from the packaging.
- Verify that all parts listed in the packing list (not provided in this manual, refer to your product packaging) are present and undamaged.
- Place all components on a soft, clean surface to prevent scratches during assembly.
3.2. Table Assembly
- Attach the table legs to the table frame using the provided hardware. Do not fully tighten screws yet.
- Carefully place the tempered glass top onto the assembled table frame. Ensure it is properly seated and aligned.
- Secure the glass top to the frame using the designated fasteners.
- Once all parts are aligned, fully tighten all screws.
Image 3.1: Detail of the tempered glass table top and sturdy metal frame, highlighting key components for assembly.
3.3. Chair Assembly
- Attach the chair backrest to the seat frame.
- Connect the chair legs to the seat frame.
- Ensure all parts are aligned and then tighten all screws securely.
- Repeat for the second chair.
Image 3.2: Detail of the comfortable synthetic padded seat and faux leather upholstery of a chair.
After assembly, gently shake the table and chairs to ensure stability. Adjust any loose connections if necessary.
4. Operating Instructions
This dining set is designed for dining and general household use. Its compact size makes it suitable for small living spaces.
- Placement: Position the dining set on a flat, stable surface.
- Space-Saving Feature: When not in use, the chairs can be neatly tucked under the table to maximize floor space.
Image 4.1: The dining set demonstrating its space-saving design with chairs stored under the table.
5. Maintenance
Proper maintenance will extend the life and appearance of your dining set.
- Cleaning: Wipe surfaces with a dry cloth. For spills, use a damp cloth immediately and dry thoroughly. Avoid abrasive cleaners.
- Glass Care: Use glass cleaner for the tempered glass top. Do not use harsh chemicals that could damage the glass or frame.
- Frame Care: The metal frame is rust-resistant. Clean with a soft, damp cloth.
- Upholstery Care: For faux leather upholstery, wipe with a damp cloth. Avoid excessive moisture.
- Regular Checks: Periodically inspect all screws and connections to ensure they are tight. Tighten if necessary.
Image 5.1: Demonstrating easy maintenance by wiping the glass table top clean.
6. Troubleshooting
If you encounter issues with your dining set, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chair is wobbly | Loose fasteners; uneven floor. | Check and tighten all screws. Ensure the set is on a level surface. |
| Glass top not sitting flush | Improper alignment during assembly; fasteners not fully secured. | Loosen fasteners, realign the glass top, then retighten. |
| Missing parts | Packaging error. | Contact customer support with your purchase details. |
| Scratches on glass | Abrasive cleaning materials; sharp objects. | Use only soft cloths and appropriate glass cleaners. Avoid dragging objects across the surface. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 835-255V01WT |
| Brand | HOMCOM |
| Color | White |
| Table Dimensions | 29.5" W x 29.5" D x 29.5" H (75 x 75 x 75 cm) |
| Chair Dimensions | 15.7" W x 19.9" D x 38.2" H (40 x 50.5 x 97 cm) |
| Table Weight Capacity | 110 lbs (50 kg) |
| Chair Weight Capacity | 265 lbs (120 kg) |
| Material | Steel Frame, Tempered Glass, PU leather |
| Item Weight | 25.99 kg |
| Assembly Required | Yes |
Image 7.1: Detailed dimensions of the HOMCOM Dining Table and Chairs.
8. Warranty Information
This HOMCOM dining set comes with a 90-day warranty against manufacturer defects. Please retain your proof of purchase for warranty claims.
The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repairs.
9. Customer Support
For assistance with assembly, missing parts, or any other inquiries, please contact HOMCOM customer support:
- Manufacturer: Aosom Canada
- Contact Information: Markham, Ontario, CA
- Telephone: 1-416-792-6088
- Return Policy: Eligible for Return or Refund within 30 days of receipt (refer to retailer's policy for full details).
When contacting support, please have your model number (835-255V01WT) and proof of purchase readily available.
