Geometric Future Eskimo Pro 420mm AIO CPU Liquid Water Cooler User Manual

Product Overview

The Geometric Future Eskimo Pro 420mm AIO CPU Liquid Water Cooler is designed to provide superior thermal management for high-performance computing systems. It features a robust liquid pump, a large copper base for efficient heat transfer, and pre-installed ARGB fans for optimal airflow and aesthetic appeal. This cooler is compatible with a wide range of Intel and AMD CPU sockets.

Image: The complete Geometric Future Eskimo Pro 420mm AIO Liquid Cooler assembly, showcasing the radiator, three fans, and the CPU block.

Image: A promotional image highlighting the Eskimo Pro 420mm Liquid Cooler, emphasizing its 420mm size.

Key Features

• Advanced K6 Liquid Pump: Features a high-flow K6 liquid pump capable of pushing 1.5 liters of coolant per minute for efficient heat dissipation.
• Large Copper Base: Equipped with a 55.8 x 55.8mm copper base for excellent heat transfer from the CPU.
• Vibrant ARGB Diffused CPU Block: Adds a striking visual element with customizable lighting.
  

  Image: Close-up view of the unique ARGB CPU block, showcasing its diffused lighting capabilities and design from multiple angles.

• Pre-installed Squama 2503 ARGB Fans: High-static pressure fans ensure efficient airflow with a combined capacity of 150 cubic feet per minute.
  

  Image: Detailed view of the pre-installed Squama 2503 ARGB fan, highlighting its 9 dragon-scale blades, textured frame, and edge-lit ARGB design.

• Universal Compatibility: Supports the latest Intel and AMD sockets, including LGA 1700 and AM5.
  

  Image: Diagram illustrating the universal compatibility of the cooler with various Intel (LGA1700/1851) and AMD (AM4/AM5) CPU sockets, showing different mounting brackets.

• Efficient Heat Flow Radiator: Designed with dense channels for rapid cooling and smooth coolant circulation.
  

  Image: Close-up view of the radiator fins, emphasizing the efficient heat flow design with dense channels.

  

  Image: Side view of the radiator assembly, showing the cooling fins and the connection points for the tubes.

Setup and Installation

This section provides general guidelines for installing your Geometric Future Eskimo Pro AIO cooler. Refer to the detailed installation guide included in your product packaging for specific steps and diagrams for your CPU socket type.

Pre-installation Checklist:

• Ensure your PC case has adequate clearance for a 420mm radiator (456 x 140 x 27 mm) and three 140mm fans.
• Verify all components are present: radiator with pre-installed fans, CPU block/pump, mounting hardware for Intel and AMD sockets, thermal paste.
• Gather necessary tools: screwdriver, cleaning cloth, isopropyl alcohol (for CPU surface preparation).

General Installation Steps:

1. Prepare CPU Socket: Install the correct backplate and standoffs for your motherboard's CPU socket (Intel LGA 1700/1200/115X or AMD AM5/AM4).
2. Apply Thermal Paste: Apply a small amount of thermal paste (included) to the center of your CPU's integrated heat spreader (IHS).
3. Mount CPU Block: Carefully place the CPU block onto the CPU, aligning it with the standoffs. Secure it with the appropriate mounting screws, tightening them in a diagonal pattern until snug.
4. Install Radiator: Mount the radiator with the pre-installed fans to an available fan mounting location in your PC case (typically top or front). Ensure proper airflow direction.
5. Connect Cables:
   • Connect the pump's power cable to an available CPU_FAN or AIO_PUMP header on your motherboard.
   • Connect the fan PWM cables to available fan headers on your motherboard. The fans are daisy-chained for simplified connection.
   • Connect the ARGB cables from the CPU block and fans to a compatible 5V ARGB header on your motherboard or an ARGB controller.
6. Cable Management: Route all cables neatly to ensure proper airflow and a clean build.

Operating Instructions

Once installed, the Geometric Future Eskimo Pro AIO cooler operates automatically based on your motherboard's fan control settings and the CPU's temperature. For optimal performance and customization, follow these guidelines:

Fan and Pump Control:

• BIOS/UEFI Settings: Access your motherboard's BIOS/UEFI settings to configure fan curves for the CPU_FAN/AIO_PUMP header and other fan headers. It is recommended to set the pump to run at 100% speed for consistent cooling performance.
• Software Control: Many motherboards offer desktop software utilities for fan control and monitoring. Use these to fine-tune fan speeds based on CPU temperature or desired noise levels.

ARGB Lighting Control:

• Motherboard Software: If connected to a motherboard's 5V ARGB header, use the motherboard's RGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize the lighting effects of the CPU block and fans.
• ARGB Controller: If using a standalone ARGB controller, refer to the controller's manual for instructions on changing lighting modes and colors.

Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your AIO liquid cooler.

• Dust Cleaning: Periodically (every 3-6 months, or more frequently in dusty environments) clean dust from the radiator fins and fan blades using compressed air or a soft brush. Ensure the fans are not spinning during cleaning to prevent damage.
• Inspect Tubing: Visually inspect the tubing for any signs of kinks, leaks, or damage. While the tubing is designed for durability, regular checks are recommended.
• Check Connections: Ensure all power and ARGB cables remain securely connected to the motherboard and components.
• Thermal Paste (Long-Term): The pre-applied thermal paste is designed for long-term use. Re-application is generally not necessary unless the cooler is removed from the CPU. If re-installing, clean the old thermal paste from both the CPU and the cooler's copper base using isopropyl alcohol before applying new thermal paste.

Troubleshooting

If you encounter issues with your Geometric Future Eskimo Pro AIO cooler, refer to the following common troubleshooting steps:

Specifications

Detailed technical specifications for the Geometric Future Eskimo Pro 420mm AIO CPU Liquid Water Cooler.

Note: Specifications are subject to change without prior notice. For the most up-to-date information, please refer to the official product page or contact Geometric Future support.

Image: A table summarizing the detailed product specifications for the Eskimo Pro 420, including pump, radiator, and fan details.

Warranty Information

The Geometric Future Eskimo Pro 420mm AIO CPU Liquid Water Cooler comes with a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

The warranty does not cover:

• Damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes.
• Damage caused by operating the product outside the permitted or intended uses described by Geometric Future.
• Damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Geometric Future or an authorized Geometric Future Service Provider.
• Products or parts that have been modified to alter functionality or capability without the written permission of Geometric Future.

For warranty claims, please retain your proof of purchase.

Support and Contact

For technical support, warranty inquiries, or further assistance with your Geometric Future Eskimo Pro AIO Liquid Cooler, please contact Geometric Future customer service.

• Manufacturer: Geometric Future
• Website: Please visit the official Geometric Future website for the most current support information, FAQs, and contact methods.
• Online Resources: Check the product page on the retailer's website or the manufacturer's website for updated drivers, software, and additional documentation.

When contacting support, please have your product model number (GEO-EP-42W) and proof of purchase readily available.