eXtremeRate RISE V3 Remap Kit Instruction Manual

1. Introduction

The eXtremeRate RISE V3 Remap Kit allows you to upgrade your PlayStation 5 DualSense controller by adding two programmable back paddles. This modification enhances gameplay by providing additional input options, transforming your standard controller into a professional eSport-ready device. This manual provides comprehensive instructions for installation and operation.

2. Compatibility

This kit is specifically designed for PlayStation 5 DualSense controllers with motherboard models BDM-030, BDM-040, and BDM-050. It is crucial to verify your controller's model before proceeding with installation.

How to Check Your Controller's BDM Model:

1. Connect your PS5 controller to a PC using a USB cable.
2. Search for "extremerate check bdm for ps5 controller" or the video ID "fiE4BWSlBRI" on YouTube for a visual guide on how to identify your controller's BDM model.
3. Alternatively, you can open your controller and visually inspect the motherboard for the BDM model number.

3. Package Contents

The eXtremeRate RISE V3 Remap Kit includes the following components:

• RISE V3 Remap Board
• Redesigned Back Shell
• 2 Back Paddles
• FPC Cables
• Screws and Springs
• Prying Tool
• Screwdriver
• Other necessary small parts for installation

4. Installation

The installation process involves disassembling your PS5 controller and integrating the remap kit components. Soldering is an optional step for certain functionalities or preferences, but the core remap function can be achieved without it.

Installation Guide Video:

For a detailed visual guide, please refer to the official installation video. Search for "How to install RISE Remap Kit V3 for ps5 controller- eXtremeRate" or the video ID "oV_xGgwkf4A" on YouTube.

Disclaimer: Modifying your controller carries inherent risks. eXtremeRate is not responsible for any damage to your controller during the installation process. Proceed at your own risk. If any parts are found to be defective upon receipt, please contact customer support for an exchange.

Key Installation Steps (Visual Reference):

5. Operating Instructions (Button Remapping)

The RISE V3 Remap Kit adds two ergonomic back paddles that can be programmed to mimic other controller buttons, providing a competitive edge.

Programmable Buttons:

You can assign up to 15 different controller buttons to the back paddles:

• X, O, Triangle, Square
• Directional Pad: Up, Down, Left, Right
• Shoulder Buttons: L1, R1, L2, R2
• Stick Clicks: L3, R3
• Touchpad Button

Remapping Process:

To remap a button to a back paddle:

1. Locate the Setting Button on the back of the controller (refer to the image below).
2. Press and hold the Setting Button for 3 seconds until the LED indicator flashes. This indicates you are in remapping mode.
3. Press the desired back paddle and the button you wish to assign to it simultaneously. For example, press the left back paddle and the 'X' button.
4. Release both buttons. The LED indicator will stop flashing, confirming the successful remapping.
5. Repeat the process for the other back paddle if desired.

6. Charging Information

After installing the RISE V3 Remap Kit, your controller's compatibility with original PlayStation 5 charging stands may be affected due to the altered back shell design.

• Wired Charging: Charging your controller via a USB cable remains fully functional and unaffected by the kit.
• Dedicated Charging Stand: For users who prefer a charging stand, eXtremeRate offers a dedicated charging solution compatible with the modified controller. You can search for product ID "B0BGS28VRZ" to find this accessory.

7. Maintenance

To ensure the longevity and optimal performance of your eXtremeRate RISE V3 Remap Kit and controller:

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the controller to liquids or extreme temperatures.
• Handle the back paddles gently to prevent damage.

8. Troubleshooting

If you encounter issues after installing the remap kit, consider the following:

• Buttons Not Responding: Ensure all flexible cables (FPC) are securely and correctly connected to the remap board and the controller's motherboard. A loose connection is a common cause of non-responsive buttons.
• Diagnostic Mode: Some eXtremeRate kits feature a diagnostic mode. Try holding down the K1 back button and the Setting Button simultaneously for an extended period to check if connections are properly registered.
• Defective Parts: If you suspect a part of the kit is defective, please contact eXtremeRate customer support for assistance and potential replacement.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or inquiries regarding defective parts, please contact eXtremeRate customer service directly through their official website or the retailer from whom you purchased the product. Ensure you retain your proof of purchase for any warranty claims.