Electactic Ice Maker Machine

Product Overview

The Electactic portable ice maker machine is designed for convenient and efficient ice production. This compact countertop unit features quick ice making, two ice cube sizes (S and L), and an automatic self-cleaning function, making it ideal for various settings such as homes, offices, camping, and parties.

Key features include:

• Fast Ice Making: Produces 9 bullet-shaped ice cubes in as little as 6 minutes, with a capacity of up to 26 pounds of ice in 24 hours.
• Low Noise Operation: Operates quietly, with noise levels below 35 dB.
• Two Ice Sizes: Offers small (S) and large (L) ice cube options for different needs.
• Portable Design: Compact size (D11.57*W8.74*H11.42 inches) and lightweight (14.08 pounds) with a handle for easy transport.
• Self-Cleaning Function: Automated cleaning cycle for hassle-free maintenance.
• Removable Top Cover: Facilitates easier cleaning and ensures pure ice.
• Simple Operation Panel: User-friendly controls with indicator lights for water shortage and ice full.

Image: The Electactic Ice Maker Machine in white, showcasing its compact design, an ice basket, an ice scoop, and a refreshing blue beverage with ice. This image highlights the product's primary function and accessories.

Setup and Installation

1. Unpacking: Carefully remove the ice maker from its packaging. Ensure all components, including the ice scoop and ice basket, are present.
2. Placement: Place the ice maker on a flat, stable surface away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
   

   Image: A visual representation of the ice maker's portable and compact size, with dimensions (11.22"W x 8.66"D x 11.4"H) and a comparison to an A4 paper, emphasizing its suitability for countertops.

3. Initial Cleaning: Before first use, it is recommended to clean the interior of the ice maker. You can use the self-cleaning function (refer to the Maintenance section) or manually clean with a soft cloth and mild detergent. Rinse thoroughly.
4. Add Water: Open the top lid and fill the water reservoir with clean, potable water up to the MAX fill line. Do not overfill.

Operating Instructions

The Electactic ice maker features a simple control panel for easy operation.

Image: A step-by-step guide illustrating the simple operation of the ice maker: 1. Add Water, 2. Press "ON/OFF", 3. Press "SELECT-S/L", and 4. Enjoy Bullet Ice in 6 Mins. The control panel with its indicator lights and buttons is clearly visible.

1. Power On: After adding water, press the "ON/OFF" button to turn on the machine. The "POWER" indicator light will illuminate.
2. Select Ice Size: Press the "SELECT" button to choose between small (S) or large (L) ice cubes. The corresponding indicator light will illuminate.
   

   Image: This diagram illustrates the two available ice cube sizes, Small (S) and Large (L), along with their respective dimensions. Small cubes are suitable for seafood and beer, while large cubes are ideal for beverages.
3. Ice Making Process: The machine will begin the ice-making cycle. The first batch of 9 ice cubes can be ready in as little as 6 minutes. Subsequent cycles may vary slightly (6-13 minutes per round).
   

   Image: An internal view of the ice maker demonstrating the rapid ice production process. It highlights the machine's capability to produce 26 pounds of ice per day and 9 pieces of ice every 6 minutes. The removable top lid is also shown, designed for easier cleaning.

4. Indicator Lights:
   • The "ADD WATER" indicator will illuminate when the water level in the reservoir is low, prompting you to refill.
   • The "ICE FULL" indicator will illuminate when the ice basket is full, and the machine will pause ice production until ice is removed.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene of your ice maker.

1. Automatic Self-Cleaning:
   • Ensure the water reservoir is filled.
   • Press and hold the "ON/OFF" button for more than 5 seconds. The machine will enter the self-cleaning process.
   • The self-cleaning cycle takes approximately 30 minutes to complete.
   • After the cycle, drain any remaining water and wipe the interior dry.
   

   Image: A visual guide demonstrating the automatic self-cleaning function. It shows holding the ON/OFF button for 5 seconds to initiate a 30-minute cleaning cycle, ensuring the machine remains hygienic.
2. Manual Cleaning:
   • Unplug the machine before cleaning.
   • Remove the ice basket and the removable top cover for easier access.
   • Wipe the interior with a soft cloth dampened with a mild detergent solution.
   • Rinse thoroughly with clean water and dry completely before reassembling.
   • It is recommended to clean the machine at least once a month, or more frequently depending on usage.
3. External Cleaning: Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.

Troubleshooting

Specifications

Warranty and Support

This product is manufactured by Electactic. For specific warranty information, please refer to the documentation included with your purchase or visit the official Electactic website.

For customer support, technical assistance, or inquiries regarding your Electactic Ice Maker Machine, please contact Electactic customer service through their official channels. You may find contact information on the product packaging or the brand's official website.

Consider purchasing extended protection plans for additional coverage:

• 2-Year Protection Plan: Available for purchase.
• 3-Year Protection Plan: Available for purchase.
• Complete Protect: Monthly plan covering eligible past and future purchases.