GYoYRoc Wireless CarPlay & Android Auto Receiver Instruction Manual

1. Compatibility

This GYoYRoc Wireless CarPlay & Android Auto Receiver is designed exclusively for Acura models equipped with the Factory Dual-Screen System. Please verify your vehicle's compatibility before installation.

• Compatible Models:
  • Acura MDX (2014-2020)
  • Acura TLX (2015-2020)
  • Acura RDX (2014-2018)
  • Acura ILX (2016-2020)
• Exclusions: This system is NOT compatible with older single-screen Navigation models (2013 and older) or the newer 2019+ RDX models featuring the touchpad system.

Image: Visual guide for compatible Acura dual-screen models (ILX, MDX, RDX, TLX, RLX).

2. What's in the Box

Your GYoYRoc Wireless CarPlay & Android Auto Receiver package includes the following components:

• CarPlay Box (Main Module)
• Accessory Harness
• Installation Instructions
• GPS Antenna
• Microphone Extension Cable (Note: Only suitable for some models, typically those with the original car microphone on the ceiling, such as the Odyssey. Not needed if the original car microphone is located below.)
• AUX Cable
• LVDS Cable
• Double-sided tape for securing the module

3. Setup and Installation

Follow these steps to install your GYoYRoc Wireless CarPlay & Android Auto Receiver. Professional installation is recommended.

3.1. Module Dial Settings

Before connecting, configure the DIP switches on the module according to your specific Acura model to ensure correct resolution and functionality. Refer to the diagram below for the correct settings.

Image: Close-up of the CarPlay module showing the DIP switch settings for various Acura models (TLX, ILX, RDX, MDX, RLX).

3.2. Wiring Connections

Connect the provided wiring harness to your vehicle's existing head unit. Ensure all connections are secure.

• Connect the LVDS cable to the corresponding ports on the module and the original car's CD player.
• Connect the main power plug to the designated socket on the CD player.
• Connect the AUX plug to the corresponding port on the radio.
• If applicable, connect the microphone extension cable.

Image: Schematic diagram illustrating the connection points for LVDS, MIC, and Power Plugs to the module socket and original car plugs.

4. Operating Instructions

This system integrates seamlessly with your vehicle's existing controls. The factory upper screen is non-touch, so all CarPlay/Android Auto functions are controlled via the original Central Control Knob/Jog Dial and Steering Wheel Buttons.

4.1. Wireless Connectivity

• The system automatically connects to your CarPlay or Android Auto device wirelessly.
• Displays navigation (Maps, Waze), music (Spotify), and other compatible apps on the large top screen.
• Supports AirPlay / Mirroring for casting videos for passengers.

4.2. Control Methods

• Steering Wheel Controls: Use existing steering wheel buttons for voice awakening, call answering/ending, media control (up/down), and volume adjustment. Press and hold for 2 seconds to enter the system page; short press to return to the HOME page.
• Central Control Knob / Jog Dial: Use the central control knob to navigate the system. Press to enter app functions, use left/right dial for media control, and dial up/down to move the cursor. Press and hold for 2 seconds to enter the system page; short press to return to the HOME page.

Image: Diagram illustrating the functions of steering wheel controls for the CarPlay system.

Image: Diagram illustrating the functions of the central control knob for the CarPlay system.

4.3. OEM Bluetooth Audio

The system supports the Original Factory Bluetooth Channel for lossless, high-fidelity audio with zero background noise. To enable this, navigate to "System -> Factory Mode" and check "Phone Link Setting". The sound is transmitted directly to the car's amplifier via Bluetooth. AUX mode is also supported as a backup.

4.4. Retained Factory Features

The module fully retains compatibility with Acura's factory Reverse Camera and 360° Surround View System. The video feed switches automatically when the car is in reverse, maintaining all dynamic parking guidelines.

5. Maintenance

• Keep the module and connections free from dust and moisture.
• Avoid exposing the unit to extreme temperatures.
• Regularly check wiring connections to ensure they remain secure.
• Clean the screen with a soft, dry cloth. Avoid harsh chemicals.

6. Troubleshooting

If you encounter any issues, refer to the following common troubleshooting tips:

• Screen Flickering:
  • Verify DIP switch settings are correct for your model.
  • Check LVDS cable connections for looseness or damage.
  • Ensure all wiring is properly shielded and not interfering with other components.
• Microphone Issues:
  • Ensure the microphone extension cable is correctly connected (if applicable).
  • Verify the microphone is not obstructed.
• No Audio / Static Noise:
  • Confirm "Phone Link Setting" is enabled in "System -> Factory Mode" for OEM Bluetooth audio.
  • Check AUX cable connection if using AUX mode.
  • Ensure car audio input is set to the correct source (Bluetooth or AUX).
• CarPlay/Android Auto Not Connecting:
  • Ensure your phone's Wi-Fi and Bluetooth are enabled.
  • Verify the module's Bluetooth signal is matched with your phone.
  • Restart both your phone and the car's infotainment system.

7. Specifications

8. Warranty & Support

No specific warranty information is provided in the product details. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform.

For additional support, you may visit the GYoYRoc Store on Amazon.