1. Product Overview
The darkFlash DY470 is a full-tower ATX gaming PC case designed for high-performance builds. It features a unique angled glass panel, a dual-chamber layout for efficient component separation, and extensive compatibility for modern hardware. This manual provides detailed instructions for assembly, operation, and maintenance.
Figure 1.1: Fully assembled darkFlash DY470 PC case showcasing internal components and lighting.
Key Features:
- Unique Angled Glass: Provides an enhanced view of internal components.
- Dual-Chamber Design: Separates components for improved airflow and aesthetics.
- Back Plug-in Motherboard Support: Simplifies cable management and enhances internal aesthetics.
- Extensive Cooling Support: Accommodates up to two 360mm radiators and multiple fans.
- Spacious Interior: Supports large GPUs up to 410mm and CPU coolers up to 175mm.
- Tool-Free Installation: Features a snap-on design for easy assembly and maintenance.
Figure 1.2: Visual representation of the darkFlash DY470's core features.
2. Installation Guide
Follow these steps to install your components into the darkFlash DY470 PC case. Ensure your system is powered off and unplugged before beginning any installation.
2.1 Case Preparation
The DY470 case features a screwless disassembly design for easy access to internal compartments. Gently remove the side and top panels to prepare for component installation.
Figure 2.1: Easy disassembly of case panels for installation access.
2.2 Motherboard Installation
The DY470 supports ATX back-mounted motherboards. Install your motherboard onto the designated standoffs in the main chamber. Ensure all necessary cables are routed through the back panel for a clean build.
Figure 2.2: Motherboard area with back plug-in support highlighted.
2.3 GPU Installation
The case accommodates large graphics cards. You can install your GPU horizontally or vertically. For vertical mounting, a riser cable (not included) is required.
- Maximum GPU Length (Horizontal): 410mm
- Maximum GPU Length (Vertical): 390mm
Figure 2.3: GPU compatibility and mounting options.
2.4 Fan and Radiator Installation
The DY470 offers flexible cooling options. Install fans and radiators according to your cooling needs. The case supports:
- Top: 3x120mm / 2x140mm fans; supports 120/240/280/360 liquid coolers.
- Side: 3x120mm / 2x140mm fans; supports 120/240/280/360 liquid coolers.
- Rear: 1x120mm fan; supports 120 liquid coolers.
- Bottom: 3x120mm / 2x140mm fans.
Figure 2.4: Fan and radiator bracket support.
2.5 Storage Drive Installation
Install your storage drives in the designated bays:
- 2 x 3.5" HDD bays
- 1 x 2.5" SSD bay
Figure 2.5: Storage drive bay locations.
2.6 Power Supply Installation
Install your power supply unit (PSU) in the bottom-mounted, dual-chamber compartment. Ensure the PSU fan faces outwards for optimal cooling.
2.7 Cable Management
Utilize the integrated velcro straps and the wire-covering back panel to organize cables for a clean build and improved airflow.
Figure 2.6: Cable management features and dust filter.
3. Operation
3.1 Front I/O Panel
The front I/O panel provides convenient access to essential ports and controls:
- Power Button: To turn the system on/off.
- Reset Button: To restart the system.
- USB 3.0 Ports (x2): For high-speed data transfer (up to 300MB/s).
- Type-C Port: For high-speed data transfer (up to 1280MB/s).
- HD Audio Jacks: For headphones and microphone.
Figure 3.1: Front I/O Panel layout.
3.2 ARGB Fan Control
The included PWM ARGB fans can be controlled via compatible motherboard software for synchronized lighting effects. Please note that an ARGB Hub Controller is not included with the case and may be required for full functionality depending on your motherboard.
Figure 3.2: ARGB fan lighting synchronization.
3.3 Optimal Airflow
The dual-chamber design and extensive fan support contribute to optimal heat dissipation. Ensure fans are installed in appropriate intake and exhaust configurations for efficient cooling.
Figure 3.3: Airflow diagram for optimal heat dissipation.
4. Maintenance
4.1 Dust Filter Cleaning
The case includes a pull-out dust filter at the bottom to prevent dust accumulation. Regularly clean this filter to maintain optimal airflow and component longevity.
- Gently pull out the dust filter from the bottom of the case.
- Clean the filter using compressed air or a soft brush.
- Reinsert the clean filter into its slot.
Figure 4.1: Pull-out dust filter for easy cleaning.
4.2 General Cleaning
For general cleaning of the case exterior and interior:
- Use a soft, dry cloth to wipe down exterior surfaces.
- For glass panels, use a glass cleaner applied to a cloth (not directly to the glass) to avoid streaks.
- Use compressed air to remove dust from internal components and fan blades.
- Avoid using harsh chemicals or abrasive materials that could damage the finish.
5. Troubleshooting
This section addresses common issues you might encounter during assembly or operation.
5.1 Power Issues
- No Power: Ensure all power cables (PSU to wall, PSU to components, front panel connectors to motherboard) are securely connected. Check the power switch on the PSU.
- Intermittent Power: Verify PSU wattage is sufficient for all components. Check for loose connections.
5.2 Cooling Issues
- High Temperatures: Confirm fans are installed in the correct orientation (intake/exhaust). Ensure dust filters are clean. Verify CPU cooler and GPU cooler are properly seated.
- Fan Noise: Check for obstructions in fan blades. Ensure fans are securely mounted.
5.3 Component Fit Issues
- GPU Not Fitting: Refer to Section 2.3 for maximum GPU length specifications. Ensure the GPU is aligned correctly with the PCIe slot.
- CPU Cooler Clearance: Refer to Section 6 for maximum CPU cooler height.
6. Technical Specifications
Detailed specifications for the darkFlash DY470 Full-Tower ATX Gaming PC Case.
| Feature | Specification |
|---|---|
| Model Name | DY470 |
| Case Type | Full Tower |
| Motherboard Compatibility | ATX |
| Material | Metal, Tempered Glass |
| Product Dimensions (LxWxH) | 18.66 x 11.77 x 19.6 inches |
| Item Weight | 22 pounds |
| Max GPU Clearance | Up to 410mm (Horizontal) / 390mm (Vertical) |
| Max CPU Air Cooler Height | Up to 175mm |
| PSU Length (Max) | 180mm |
| Radiator Support (Top) | Up to 360mm |
| Radiator Support (Side) | Up to 360mm |
| Drive Bays | 2 x 3.5" HDD, 1 x 2.5" SSD |
| Front I/O Ports | 2 x USB 3.0, 1 x Type-C, HD Audio, Power, Reset |
| Cooling Method | Air, Water |
Figure 6.1: Case dimensions and fan layout.
Figure 6.2: Internal component clearance and radiator support.
7. Warranty and Support
darkFlash provides a 1-year assurance for computer cases, ensuring product quality and customer satisfaction. For any inquiries, technical assistance, or warranty claims, please contact darkFlash customer support through their official website or your point of purchase.
Please retain your proof of purchase for warranty validation.
