1. Product Overview
The VolenGo E1000 Pro Label Maker is a versatile and portable labeling device designed for creating durable, high-quality labels. It features a full QWERTY keyboard for efficient text input and one-touch keys for quick formatting. This label maker is suitable for various environments, including home, office, and industrial settings, providing clear and long-lasting labels for organization and identification.
Key Features
- Efficient wire label identification with three cable modes.
- Easy-access shortcuts for creating and formatting wire/cable wraps, flags, barcodes (Code 39 and Code 128), fixed-length labels, general labels, and switch labels.
- Supports 12mm waterproof VolenGo tapes with integrated encryption for clearer prints. Tapes are resistant to water, oil, abrasion, and extreme temperatures.
- Optimized tape usage, saving approximately 22 inches of tape when printing 20 labels at once, with narrower margins reducing waste by 42 millimeters per label.
- Powered by 6 AAA dry cells (not included) or via the included USB-C cable.
- High-end cable identification with a 2:1 shrink ratio for secure fit on cables and wires (300V/125°C/VW-1).
- Familiar QWERTY keyboard layout for efficient and quick label creation.
Image: VolenGo E1000 Pro Label Maker demonstrating its versatility across different labeling applications.
Video: A close-up view of the VolenGo E1000 Pro Label Maker, highlighting its design and features.
2. Setup
Package Contents
Verify that all items are included in the package:
- 1 E1000 Label Maker
- 1 User Manual
- 1 Replacement Cutter Holder
- 1 USB Type-C Cable (1m)
- 1 White Laminated Label Tape (12mm x 4m)
Image: All components included in the VolenGo E1000 Pro Label Maker package.
Inserting Batteries
The E1000 Pro Label Maker can be powered by 6 AAA batteries (not included). To insert batteries:
- Open the battery compartment cover on the back of the device.
- Insert 6 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Loading Label Tape
To load a label tape cassette:
- Open the tape cassette cover on the top-right side of the label maker.
- Insert the label tape cassette firmly into the compartment, ensuring the tape feeds correctly into the print head.
- Close the tape cassette cover until it clicks into place.
Video: An unboxing and initial setup guide for the label maker, demonstrating how to install batteries and load tape.
3. Operation
Basic Label Creation
To create a basic label:
- Press the Power button to turn on the device.
- Use the QWERTY keyboard to type your desired text. The text will appear on the LCD screen.
- Use the navigation keys to move the cursor and edit text if needed.
- Press the Print button to print the label.
Using One-Touch Hot Keys
The E1000 Pro features dedicated one-touch keys for quick access to common formatting options:
- Cable Wrap: Formats text for wrapping around cables.
- Flag: Creates flag-style labels for cables.
- Fixed Length: Sets a specific length for your labels.
- Barcode: Generates Code 39 and Code 128 barcodes.
- General: For standard text labels.
- Switch: Designed for switch panel labeling.
Image: The label maker's display showing multi-edit functionality and options for narrow margins to reduce tape waste.
Printing and Cutting
After printing, use the integrated cutter to separate the label from the tape roll. Ensure the label is fully printed before cutting to avoid damage.
Image: Examples of labels printed using heat shrink tube tape and standard laminated tape, showing different applications.
4. Maintenance
Cleaning the Print Head
To maintain print quality, clean the print head periodically:
- Turn off the label maker and remove the tape cassette.
- Use a cotton swab lightly moistened with isopropyl alcohol to gently wipe the print head.
- Allow the print head to dry completely before reinserting the tape cassette and turning on the device.
Replacing the Cutter
If the cutter becomes dull or damaged, replace it with the provided spare cutter holder:
- Turn off the label maker.
- Locate the cutter holder near the tape exit slot.
- Carefully remove the old cutter holder and insert the new one until it clicks into place.
5. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Blank labels or poor print quality | Low batteries, incorrect tape installation, dirty print head. | Replace batteries, re-install tape cassette correctly, clean print head. |
| Tape jam | Improper tape loading, foreign object in tape path. | Remove tape cassette, clear any obstructions, re-insert tape. |
| Device does not turn on | Dead batteries, loose USB-C connection. | Replace batteries, ensure USB-C cable is securely connected to a power source. |
| Labels are not cutting properly | Dull or damaged cutter. | Replace the cutter holder. |
6. Specifications
| Feature | Detail |
|---|---|
| Controller Type | Push Button |
| Maximum Paper Size | 0.47 inch (12mm) |
| Print Media | Labels |
| Maximum Input Sheet Capacity | 12 |
| Maximum Print Resolution (Black & White) | 180 DPI |
| Duplex Printing | No |
| Maximum Copies at a Time | 20 |
| Sheet Size | 3.5, 6, 9, 12 Millimeters |
| Connectivity Technology | USB |
| Printing Technology | QWERTY Keyboard |
| Special Feature | Wire Cable Label Maker |
| Color | Orange |
| Print Output | Monochrome |
| Product Dimensions | 6.15 x 11.66 x 21.29 cm; 531 g |
7. Power Modes
The VolenGo E1000 Pro Label Maker offers flexible power options:
- USB-C Power: Connect the included USB-C cable to the device and a power adapter (not included). It is recommended to use a charger block with an output voltage below or equal to 5V. This is an environmentally friendly and cost-effective option.
- AAA Batteries: For portability, the device can be powered by 6 AAA dry cells (not included). Ensure the total battery power is above 70% for optimal performance.
Image: Illustration of the two power options for the label maker: USB-C and AAA batteries.
8. Warranty and Support
Warranty Information
This product comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting, or any questions regarding your VolenGo E1000 Pro Label Maker, please contact our customer support team. Contact details can be found on our official website or in the included user manual.