Winegard AR2-5G1 Air 360+ 5G Instruction Manual

Product Overview

The Winegard AR2-5G1 Air 360+ 5G is an advanced omni-directional antenna system designed to provide maximum reception for both over-the-air (OTA) television signals and enhanced cellular connectivity. It features 4G filter technology to prevent unwanted signals and is ATSC 3.0 ready for 4K Ultra HD. This unit is compatible with both Winegard Gateway 4G and Gateway 5G units, offering seamless integration for various connectivity needs.

Key features include:

• Omni-directional TV signal reception up to 55 miles.
• Integrated 5G cellular capability for high-speed data.
• Compatibility with Winegard Gateway 4G and 5G units.
• Low latency for improved data transmission.
• StarLink Capable for alternate backhaul in remote areas (requires GW-5G01).
• Supports multiple cellular carriers and flexible data plans.

Figure 1: The Winegard AR2-5G1 Air 360+ 5G antenna, a black, dome-shaped unit with "AIR 360+ 5G" and "WINEGARD" branding visible on its surface.

Package Contents

Verify that all items listed below are included in your package:

• Winegard AR2-5G1 Air 360+ 5G Antenna Unit
• Mounting Hardware (specific components may vary, refer to included diagram)
• Coaxial Cable
• Power Injector/Amplifier
• Instruction Manual (this document)

Setup and Installation

1. Site Selection and Mounting

Choose a mounting location that is clear of obstructions and provides the best possible line of sight for TV signals and cellular reception. The antenna is designed for rooftop mounting on RVs or similar structures. Ensure the surface is flat and strong enough to support the unit.

1. Clean the mounting surface thoroughly.
2. Position the antenna and mark the drilling points for the mounting screws.
3. Drill pilot holes as per the provided template (if applicable).
4. Apply a suitable sealant around the holes to prevent water intrusion.
5. Secure the antenna to the surface using the provided mounting hardware. Do not overtighten.

2. Wiring Connections

Proper wiring is crucial for optimal performance. Refer to the wiring diagram for your specific setup.

• Connect the coaxial cable from the antenna to the "Antenna In" port on the power injector/amplifier.
• Connect a coaxial cable from the "TV Out" port on the power injector/amplifier to your television or distribution system.
• Connect the power injector/amplifier to a 12V DC power source. Ensure polarity is correct.
• For 5G/Wi-Fi functionality, connect the Ethernet cable from the antenna to your Winegard Gateway 4G or 5G unit (sold separately).

Operating Instructions

1. TV Signal Reception

The Air 360+ 5G is an omni-directional antenna, meaning it does not require aiming. Once powered, it will actively receive available over-the-air broadcasts.

1. Ensure the antenna is properly powered.
2. On your television, perform a channel scan (also known as auto-tune or auto-program). Refer to your TV's manual for specific instructions.
3. The TV will detect and store available channels.
4. For best results, perform a channel scan whenever you change locations.

2. 5G/Wi-Fi Operation (with Gateway unit)

To utilize the 5G/Wi-Fi capabilities, a compatible Winegard Gateway unit (e.g., Gateway 4G, Gateway 5G, GW-5G01) is required and sold separately.

1. Ensure your Winegard Gateway unit is properly connected to the Air 360+ 5G antenna via Ethernet and powered on.
2. Follow the setup instructions provided with your Winegard Gateway unit to activate cellular data services and configure Wi-Fi settings. This typically involves inserting a SIM card and activating a data plan.
3. Connect your devices (smartphones, tablets, laptops) to the Wi-Fi network broadcast by the Gateway unit.
4. For StarLink integration, connect the StarLink's LAN output to the WAN port of the GW-5G01 Gateway unit.

Maintenance

The Winegard AR2-5G1 Air 360+ 5G antenna is designed for minimal maintenance. Regular inspection is recommended to ensure longevity and optimal performance.

• Cleaning: Periodically clean the exterior of the antenna with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Inspection: Annually inspect all mounting hardware and cable connections for tightness and signs of wear or corrosion. Re-seal any areas where the sealant may have deteriorated.
• Cable Management: Ensure all cables are securely routed and protected from environmental damage or physical stress.

Troubleshooting

If you encounter issues with your Winegard AR2-5G1 Air 360+ 5G, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Winegard Customer Support.

Specifications

• Model: AR2-5G1
• Brand: Winegard
• Antenna Type: Omni-directional OTA, 5G/Wi-Fi Capable
• TV Signal Range: Up to 55 miles (Omni-directional)
• Compatibility: Winegard Gateway 4G, Gateway 5G, GW-5G01 (sold separately)
• Dimensions: 19.25 x 19 x 9 inches (approximate)
• Weight: 6.9 pounds (approximate)
• Color: Black
• Power Requirement: 12V DC (via power injector)
• ATSC 3.0 Ready: Yes
• UPC: 615798406943

Warranty Information

Winegard products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Winegard website. Keep your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Winegard Customer Support:

• Website: www.winegard.com
• Phone: Refer to the Winegard website for current contact numbers.
• Online Resources: FAQs, additional manuals, and support articles may be available on the Winegard support page.