1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Effireli J1-06(E) replacement remote control for Hisense Air Conditioners. This remote is designed to function without any programming or complex setup, offering a straightforward user experience.
Compatible Models:
- AP10CW2G
- AP12CR1SEPS
- AP13HR1SEJS00
- AP-14DR1SFJS2
- AP-13HR1SEJS00
- AP-08CR1SEJS
- AP12CR1G
- AP14DR1G
- AP14CR1WG
- AP10CR1W
- AP13HR1G
- AP08CR1SEJSC
- AP14DR1SFJS2
- AP10CW1G
- AP10CR1SEPS
- AP-10CR1SEPS
- AP10CR1SEJS
- AP08CR1W
- AP14DR1SFJS2
- AP-10CR1SEJS
- AP-12CR1SEJS
- AP-12CR1SEPS
- AP14CR2WG
- AP08CR2W
- AP10CR2W
- AP12CR2G
- AP13HR2G
Note: If your specific air conditioner model number is not listed above or your original remote control appears different, please contact customer support to confirm compatibility before use.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards to open it.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
2.2 Initial Use
This replacement remote control requires no programming or pairing. Once batteries are installed, it is ready for immediate use. Simply point the remote towards your Hisense Air Conditioner and begin operation.
3. Operating Instructions
Familiarize yourself with the buttons and display on your remote control:

Figure 1: Effireli J1-06(E) Replacement Remote Control Layout. This image shows the full remote control with its display screen at the top and various function buttons arranged below it. The display shows temperature '24' and time '00:00'. Key buttons include ON/OFF, MODE, FAN, SWING, SLEEP, SUPER, SMART, IFEEL, DIMMER, TIMER ON, TIMER OFF, CLOCK, and temperature adjustment buttons.
3.1 Button Functions
| Button | Function |
|---|---|
| ON/OFF | Powers the air conditioner on or off. |
| MODE | Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto). |
| FAN | Adjusts the fan speed (e.g., Low, Medium, High, Auto). |
| ▲ / ▼ (Temperature) | Increases (▲) or decreases (▼) the set temperature. |
| SWING (top) | Activates or adjusts the vertical louver swing function. |
| SWING (bottom) | Activates or adjusts the horizontal louver swing function. |
| SLEEP | Activates the sleep mode, which adjusts temperature for comfortable sleep and energy saving. |
| SUPER | Engages the powerful cooling/heating mode for rapid temperature change. |
| SMART | Activates the smart mode, which automatically selects the optimal operating mode based on room temperature. |
| IFEEL | Activates the iFeel function, which senses the temperature at the remote's location for more precise control. |
| DIMMER | Adjusts the brightness of the air conditioner's display panel. |
| TIMER ON | Sets a timer for the air conditioner to turn on automatically. |
| TIMER OFF | Sets a timer for the air conditioner to turn off automatically. |
| CLOCK | Sets the current time on the remote control's display. |
3.2 Display Indicators
- Temperature Display: Shows the set temperature (e.g., "24").
- Time Display: Shows the current time or timer settings (e.g., "00:00").
- Mode Icons: Icons indicating the current operating mode (e.g., snowflake for cooling, fan icon for fan mode).
- Fan Speed Indicator: Bars or icons indicating the selected fan speed.
4. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's range decreases or the display becomes dim. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place.
- Avoid Exposure: Do not expose the remote control to direct sunlight, high temperatures, humidity, or strong impacts.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead or incorrectly inserted batteries. Obstruction between remote and AC unit. Remote out of range. | Replace batteries, ensuring correct polarity. Remove any obstructions. Move closer to the AC unit. |
| Display is dim or blank | Low battery power. | Replace batteries. |
| Specific function not working | Air conditioner model may not support that specific function. | Refer to your air conditioner's original manual to confirm supported features. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | YK-J1-06 |
| Product Dimensions | 5.98 x 1.97 x 0.51 inches |
| Item Weight | 2.26 ounces |
| Connectivity Technology | Infrared |
| Compatible Devices | Hisense Air Conditioners (specific models listed in Introduction) |
| Special Feature | No Programming Required |
| Max Number of Supported Devices | 1 |
7. Warranty and Support
7.1 Warranty Information
Your Effireli J1-06(E) replacement remote control comes with a 30-day money-back guarantee from the date of purchase. Additionally, it is covered by a 12-month warranty against manufacturing defects. Returns and exchanges are accepted within this warranty period for eligible issues.
7.2 Customer Support
For any questions, troubleshooting assistance, or warranty claims, please contact Effireli customer support. Refer to your purchase documentation for specific contact details or visit the official Effireli website.
Note: When contacting support, please have your product model number (YK-J1-06) and purchase information ready.