Logitech 960-001681

Download PDF
Contents

Logitech MeetUp 2 All-in-One USB Conference Room Camera User Manual

Model: 960-001681

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Logitech MeetUp 2 All-in-One USB Conference Room Camera. The MeetUp 2 is designed to deliver high-quality video and audio experiences for huddle spaces and small meeting rooms, integrating advanced AI features for enhanced collaboration.

Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your meeting experience.

What's in the Box

Verify that all components are present in the packaging:

  • All-in-one MeetUp 2 with multi-function mount
  • Power supply with country-specific plugs
  • USB-C to USB-C 2.0 cable (9.82 ft / 3 m)
  • 2 wall anchors and 2 screws
  • Quick start guide (printed on the box)
Logitech MeetUp 2 All-in-One USB Conference Room Camera, front view

Figure 1: Front view of the Logitech MeetUp 2 camera. This image shows the sleek, horizontal design of the conference camera with its central lens and speaker grilles on either side.

Setup

1. Placement

Position the MeetUp 2 camera in a central location within your meeting space, ideally below or above the primary display. Ensure the camera has a clear line of sight to all participants.

Logitech MeetUp 2 camera mounted below a display in a conference room

Figure 2: The MeetUp 2 camera integrated into a small conference room setup, mounted below a display screen. This illustrates a typical installation scenario.

2. Connections

Connect the MeetUp 2 to power and your computer or meeting room system.

  1. Connect the power supply to the MeetUp 2 and plug it into an electrical outlet.
  2. Connect the supplied USB-C to USB-C cable from the MeetUp 2 to your computer (in-room PC or BYOD laptop).
Rear view of Logitech MeetUp 2 showing ports

Figure 3: Rear view of the MeetUp 2, highlighting the various connection ports including power, USB-C, and other potential inputs/outputs.

3. Mounting Options

The MeetUp 2 offers flexible mounting. Use the multi-function mount for placement on a table, or utilize the included wall anchors and screws for wall mounting.

Operating Instructions

Starting a Meeting

Once connected, the MeetUp 2 will be recognized by your operating system as a camera, microphone, and speaker. Select "Logitech MeetUp 2" as your preferred audio and video device within your chosen video conferencing application (e.g., Microsoft Teams, Zoom, Google Meet).

AI Video Features

The MeetUp 2 incorporates built-in AI features to enhance your meeting experience:

  • Auto Focus and Framing: The camera automatically adjusts focus and frames participants to ensure everyone is visible and clear.
  • Digital Pan and Tilt: Utilize digital controls within your conferencing software for fine-tuning the camera's view.

RightSound Audio Technology

The integrated RightSound technology optimizes audio intake, ensuring clear communication for remote participants. This includes AI noise suppression and automatic leveling of voices.

The six beamforming microphones provide a pickup range of up to 7 meters (23 feet), suitable for small to medium-sized rooms.

Maintenance

To ensure optimal performance and longevity of your MeetUp 2 camera, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the camera lens and exterior. Avoid abrasive cleaners or solvents.
  • Firmware Updates: Regularly check for and install firmware updates via Logitech Sync software to benefit from performance improvements and new features.
  • Storage: When not in use for extended periods, store the device in a cool, dry place.

Troubleshooting

If you encounter issues with your MeetUp 2, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No video outputLoose USB connection, incorrect camera selection in software, driver issue.
  • Ensure USB cable is securely connected to both the MeetUp 2 and the computer.
  • Verify "Logitech MeetUp 2" is selected as the camera in your video conferencing application settings.
  • Restart your computer.
  • Check Logitech's support website for updated drivers.
No audio (microphone or speaker)Incorrect audio device selection, muted microphone/speaker.
  • Ensure "Logitech MeetUp 2" is selected as both microphone and speaker in your application's audio settings.
  • Check if the microphone or speaker is muted on the device or within the software.
  • Adjust volume levels.
Poor video qualityInsufficient lighting, dirty lens, network bandwidth.
  • Ensure adequate lighting in the meeting room.
  • Clean the camera lens with a soft, dry cloth.
  • Check your internet connection speed.

For further assistance, visit the official Logitech support website or contact customer service.

Specifications

FeatureDetail
Model Number960-001681
Dimensions (L x W x H)22.44 x 8.27 x 4.33 inches
Item Weight6.16 pounds
Video Capture Resolution4K
Photo Sensor TechnologyCCD
Maximum Focal Length114 Millimeters
Maximum Aperture2.8 Millimeters
Connectivity TechnologyUSB
Microphone Pickup RangeUp to 7 meters (23 feet)
Supported PlatformsMicrosoft Teams, Zoom Rooms, Google Meet, and more

Warranty and Support

Logitech products are manufactured to the highest quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Logitech support website.

Logitech Support: For technical assistance, product registration, or to download the latest software and drivers, please visit support.logi.com.

© 2024 Logitech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.