1. Introduction
Thank you for choosing the POCREATION Black Bounce Floor Drain. This manual provides essential information for the proper installation, operation, and maintenance of your new floor drain. Please read these instructions carefully before use to ensure optimal performance and longevity of the product. Keep this manual for future reference.
2. Product Overview
The POCREATION Black Bounce Floor Drain is designed for efficient water drainage in bathrooms, showers, and toilets. It features a durable brass construction with an anodized paint process for enhanced longevity and aesthetic appeal. The innovative bounce mechanism allows for easy opening and closing, while the integrated silicone sealing helps prevent odors and overflow.
Image: Top-down view of the POCREATION Black Bounce Floor Drain in its closed position.
Key Features:
- Easy Operation: Simple one-step bounce mechanism for quick opening and closing.
- Universal Fit: Compatible with 50mm (1.97in) and 75mm (2.95in) installation pipe diameters.
- Fast Draining: Efficient design ensures rapid water drainage.
- Odor and Overflow Prevention: Built-in silicone sealing effectively prevents odors and helps manage overflow.
- Durable Construction: Made from thick brass casting with anodizing and paint treatment for corrosion resistance and long-lasting performance.
3. Specifications
| Attribute | Detail |
|---|---|
| Item Type | Bounce Shower Drain |
| Material | Brass |
| Process | Anodizing |
| Treatment | Paint Process |
| Floor Drain Size | Approx. 10 x 10 cm (3.9 x 3.9 in) |
| Product Dimensions | 11W x 9H Centimetres |
| Weight | Approx. 349g (12.3oz) |
| Application | Bathroom, Kitchen, Balcony |
| Installation Pipe Diameter | Approx. 50mm (1.97in) / 75mm (2.95in) |
| Inner Core | Brass Bounce Core |
| Color | Black |
| Number of Items | 1 |
Image: Dimensional diagram of the floor drain, indicating a 10cm x 10cm top plate and compatible pipe diameters of 50mm/75mm.
4. Setup (Installation)
The POCREATION Black Bounce Floor Drain is designed for straightforward installation. Ensure your existing drainage pipe has a diameter of approximately 50mm (1.97in) or 75mm (2.95in) for proper fit.
Installation Steps:
- Prepare the Area: Ensure the installation area is clean and free from debris. Remove any old drain components if replacing an existing drain.
- Check Pipe Diameter: Verify that the existing drainage pipe diameter matches the specifications (50mm or 75mm).
- Insert the Drain: Carefully place the floor drain into the prepared pipe opening. Ensure the base of the drain sits flush with the floor surface.
- Seal (if necessary): Apply a suitable waterproof sealant around the edges of the drain where it meets the floor, if required by local plumbing codes or for added security. Allow adequate drying time.
- Test Drainage: Once installed and sealed, pour a small amount of water into the drain to check for proper drainage and ensure there are no leaks.
5. Operating Instructions
The floor drain features a simple bounce mechanism for easy control of water flow and odor sealing.
To Open the Drain (for draining water):
- Gently press the center of the drain cover with your foot or hand. The cover will pop up, allowing water to flow freely into the drain.
Image: The floor drain with its bounce mechanism in the open position, ready for draining.
To Close the Drain (to prevent odors and overflow):
- Press the center of the drain cover again. It will click into place, sealing the drain and preventing odors from rising and acting as an anti-overflow measure.
Image: The floor drain installed in a tiled floor, showing its closed position for odor and overflow prevention.
6. Maintenance
Regular maintenance ensures the efficient and hygienic operation of your floor drain.
Cleaning Instructions:
- Regular Cleaning: Periodically clean the surface of the drain with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the finish.
- Remove Debris: The bounce mechanism allows for easy access to the inner core. Open the drain and remove any accumulated hair, soap scum, or other debris that may hinder drainage or cause odors.
- Check Silicone Seal: Inspect the silicone sealing ring for any signs of wear or damage. A damaged seal can compromise odor prevention and anti-overflow function.
- Rinse Thoroughly: After cleaning, rinse the drain area thoroughly with water to remove any cleaning solution residue.
7. Troubleshooting
If you encounter any issues with your POCREATION Black Bounce Floor Drain, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Draining | Accumulation of hair or debris in the drain. | Open the drain cover and remove any visible obstructions. Clean the inner core. |
| Unpleasant Odors | Drain cover not fully closed, or debris trapped in the seal. | Ensure the drain cover is pressed down completely to engage the silicone seal. Clean the seal and inner drain area. |
| Drain Cover Not Bouncing Properly | Mechanism obstructed by debris or worn spring. | Clean around the bounce mechanism. If the issue persists, contact customer support. |
| Water Leaking Around Edges | Improper sealing during installation or damaged sealant. | Inspect the sealant around the drain. Reapply waterproof sealant if necessary. |
8. Warranty and Support
This POCREATION Black Bounce Floor Drain comes with a manufacturer warranty for 90 days from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
What the Warranty Does Not Cover:
- Damage resulting from improper installation or misuse.
- Damage caused by accidents, abuse, neglect, or unauthorized modifications.
- Normal wear and tear.
Customer Support:
For warranty claims, technical assistance, or any questions regarding your product, please contact your retailer or the manufacturer's customer service. Please have your purchase receipt and product model number (B0DHW13T57) available when contacting support.