Greenworks BL48L4420

Greenworks 48V (2x24V) 520 CFM Brushless Leaf Blower/Vacuum Instruction Manual

Model: BL48L4420

1. Introduction

This manual provides essential information for the safe operation and maintenance of your Greenworks 48V (2x24V) 520 CFM Brushless Leaf Blower/Vacuum. Please read it thoroughly before initial use to ensure proper handling and to maximize the product's lifespan. This tool is designed for clearing leaves and debris from hard surfaces and patios, and for vacuuming and mulching garden waste.

General Safety Information

Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and gloves when operating the tool. Ensure the work area is clear of bystanders and pets. Do not operate the tool in wet conditions or near flammable liquids or gases. Disconnect the battery pack before performing any adjustments, cleaning, or maintenance.

2. Package Contents

Verify that all items are present in your package:

  • 1 x Greenworks 2x24V 520 CFM Brushless Blower / Vacuum Unit
  • 2 x Greenworks 4.0 Ah Lithium-Ion Batteries
  • 1 x Greenworks Dual Port Charger
  • 1 x Blower Tube
  • 1 x Vacuum Tube
  • 1 x Collection Bag
  • 1 x User Manual (this document)
Greenworks 48V (2x24V) 520 CFM Brushless Leaf Blower/Vacuum with two 4.0Ah batteries, dual port charger, blower tube, vacuum tube, and collection bag.

Figure 2.1: All components included in the Greenworks 48V Blower/Vacuum package.

3. Product Overview

Familiarize yourself with the main components of your Greenworks Blower/Vacuum:

Diagram of Greenworks 48V Blower/Vacuum showing components: Cruise Control, Vacuum Control Button, Secondary Ergonomic Hand Grip, Ergonomic Overloaded Hand Grip, 48V Brushless Motor, 2x24V Battery Compartment, 520 CFM Air Volume, 240 MPH Air Speed, Vacuum Tube, and Vacuum Bag.

Figure 3.1: Key components of the Greenworks 48V Blower/Vacuum.

4. Setup

4.1. Assembly

  1. Attaching the Blower Tube: Align the blower tube with the outlet on the main unit and twist until it locks securely into place.
  2. Attaching the Vacuum Tube and Collection Bag: For vacuum mode, remove the blower tube. Attach the vacuum tube to the main intake opening. Secure the collection bag to the discharge port. Ensure all connections are tight to prevent debris leakage.

4.2. Battery Charging and Installation

The Greenworks 48V Blower/Vacuum operates using two 24V 4.0Ah Lithium-Ion batteries. Always ensure batteries are fully charged before use.

  1. Charging the Batteries: Connect the dual port charger to a standard power outlet. Insert the 4.0Ah batteries into the charging slots. The indicator lights on the charger will show the charging status. A full charge typically takes approximately 120 minutes for both batteries.
  2. Installing the Batteries: Once charged, slide both batteries into the battery compartments on the tool until they click into place. Ensure they are firmly seated.
A hand inserting a Greenworks 24V Lithium-Ion battery into the dual-port battery compartment of the blower/vacuum.

Figure 4.1: Proper battery installation into the tool.

5. Operating Instructions

5.1. Starting and Stopping the Tool

To start the tool, press and hold the trigger. To stop, release the trigger. The tool features an easy trigger start, eliminating the need for cranking or priming.

Close-up of a hand pressing the trigger and turbo button on the Greenworks blower/vacuum handle.

Figure 5.1: Easy trigger start mechanism.

5.2. Blower Mode

With the blower tube attached and batteries installed, press the trigger to activate the blower. Use the variable speed control to adjust airflow. For maximum power, engage the turbo button. Direct the airflow to move leaves and debris away from desired areas.

A person operating the Greenworks leaf blower on a paved driveway, clearing leaves and debris.

Figure 5.2: Using the Greenworks Blower to clear a driveway.

5.3. Vacuum Mode (Tool-less Conversion)

To switch to vacuum mode, ensure the tool is off and batteries are removed. Detach the blower tube and attach the vacuum tube and collection bag as described in Section 4.1. Reinstall the batteries. Press the trigger to activate the vacuum. Guide the vacuum tube over leaves and debris to collect them into the bag. The tool mulches debris as it vacuums.

A person operating the Greenworks leaf vacuum on a lawn, collecting leaves into the attached collection bag.

Figure 5.3: Operating the Greenworks Blower/Vacuum in vacuum mode.

5.4. Variable Speed and Cruise Control

The tool is equipped with a trigger-activated variable speed control, allowing you to adjust the airflow or suction power. For continuous operation at a set speed, engage the cruise control feature. Refer to the product overview diagram for the location of these controls.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool.

  • Cleaning: After each use, ensure the tool is off and batteries are removed. Clean the exterior with a damp cloth. Remove any debris from the air intake and exhaust vents. For vacuum mode, empty the collection bag and clean any accumulated debris from the vacuum tube and impeller area.
  • Battery Care: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store batteries in a discharged state for extended periods. Charge batteries fully before long-term storage.
  • Storage: Store the blower/vacuum in a dry, secure location out of reach of children.

7. Troubleshooting

If you encounter issues with your Greenworks Blower/Vacuum, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Tool does not startBatteries not charged or improperly installedEnsure batteries are fully charged and correctly seated in the compartments.
Reduced airflow/suctionObstruction in blower/vacuum tube or impellerTurn off tool, remove batteries, and clear any blockages from tubes or impeller.
Short run timeBatteries not fully charged or nearing end of lifeFully charge batteries before use. Consider replacing old batteries if run time significantly decreases.
Excessive vibrationUnbalanced impeller due to debrisTurn off tool, remove batteries, and inspect impeller for debris or damage.

8. Specifications

FeatureSpecification
Model NumberBL48L4420
Power SourceBattery Powered (2x24V)
Motor TypeBrushless
Air Flow Capacity520 CFM
Maximum Air Speed240 MPH
Battery Voltage48 Volts (2x24V)
Battery Capacity2 x 4.0 Ah Lithium-Ion
Charger TypeDual Port Charger
Noise Level70.9 dB
Item Weight10.3 Pounds (approx.)
Product Dimensions36.81"L x 9.25"W x 48.31"H
Special FeaturesAdjustable Speed, Leaf Vacuum, Turbo

9. Warranty Information

The Greenworks 48V (2x24V) 520 CFM Brushless Leaf Blower/Vacuum comes with a comprehensive warranty:

  • Tool Warranty: 3 Years
  • Battery Warranty: 3 Years

For detailed terms and conditions, please refer to the warranty card included with your product or visit the official Greenworks website.

Greenworks 3-Year Tool & Battery Warranty logo.

Figure 9.1: Greenworks 3-Year Tool & Battery Warranty.

10. Support

For further assistance, technical support, or to inquire about replacement parts, please contact Greenworks customer service. Contact information can typically be found on the Greenworks website or on the product packaging.

You can also visit the official Greenworks store on Amazon for product information and accessories: Greenworks Store

© 2025 Greenworks. All rights reserved.

Related Documents - BL48L4420

Preview Greenworks BLE402 BL48L4410 48V Cordless Blower Operator Manual
Operator manual for the Greenworks BLE402 BL48L4410 48V (2x24V) cordless leaf blower. Includes safety instructions, installation, operation, maintenance, troubleshooting, technical specifications, and warranty information.
Preview Greenworks Pro 80V Brushless Axial Blower BL80L00 Owner's Manual
This owner's manual provides essential information for the Greenworks Pro 80V Brushless Axial Blower (Model BL80L00), covering safety precautions, product specifications, assembly instructions, operating procedures, troubleshooting tips, and warranty details.
Preview Greenworks BLG301 24V Cordless Leaf Blower Operator Manual
This operator manual provides comprehensive instructions for the Greenworks BLG301 24V Cordless Leaf Blower. It covers essential safety guidelines, detailed operation procedures, maintenance advice, troubleshooting tips, technical specifications, and warranty information. Learn how to safely assemble, use, and care for your Greenworks leaf blower.
Preview Greenworks 24V Axial Blower (BLG401/BL24L00) Operator Manual
Comprehensive operator manual for the Greenworks 24V Axial Blower (Models BLG401, BL24L00). Includes safety instructions, assembly, operation, maintenance, and troubleshooting guides.
Preview Greenworks BLG301 Blower Operator Manual
Operator manual for the Greenworks BLG301 cordless blower, covering safety instructions, installation, operation, maintenance, troubleshooting, technical data, and warranty information.
Preview Greenworks 40V Brushless Blower/Vac 24322 Owner's Manual
Owner's manual for the Greenworks 40V Brushless Blower/Vac (Model 24322), detailing product features, safe operation, assembly, maintenance, troubleshooting, and warranty information for efficient yard cleanup.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.