CEYOMUR CY75

Download PDF
Contents

CEYOMUR 4K Solar Trail Camera User Manual

Model: CY75

1. Introduction

Thank you for choosing the CEYOMUR 4K Solar Trail Camera. This manual provides detailed instructions to help you set up, operate, and maintain your camera for optimal performance in wildlife observation and outdoor monitoring. Please read this manual thoroughly before use and retain it for future reference.

CEYOMUR 4K Solar Trail Camera

The CEYOMUR 4K Solar Trail Camera, designed for robust outdoor use.

2. What's in the Box

Upon opening the package, please verify that all the following components are included:

  • 1 x CEYOMUR 4K Solar Trail Camera (Model CY75)
  • 1 x 32GB SD Card (pre-installed)
  • 1 x USB Cable (Type-C)
  • 1 x Mounting Strap
  • 1 x User Manual

3. Setup Guide

Follow these steps for initial setup of your trail camera:

3.1 Initial Charging

Before first use, fully charge the camera's built-in 5200mAh lithium-ion battery for at least 8 hours using the provided USB Type-C cable. The charging indicator light will be red while charging and turn green when fully charged.

Official CEYOMUR Quick Setup Guide video, demonstrating initial charging and setup steps.

3.2 Optional AA Battery Installation

For extended operation or as a backup power source, you can install 4 AA batteries (not included) into the designated battery compartment. Ensure correct polarity (+/-) when inserting batteries.

AA Battery Compartment

View of the optional AA battery compartment for backup power.

3.3 SD Card Installation

The camera comes with a 32GB SD card pre-installed. If you need to replace it or re-insert, ensure the camera is in the OFF mode. Insert the SD card into the side slot until it clicks into place.

SD Card Slot

Close-up of the SD card slot on the side of the camera.

3.4 Initial Camera Settings

Slide the power switch to the 'TEST' mode to access the camera's menu. Use the navigation buttons to:

  • Select your preferred language.
  • Set the current date and time.
  • Format the SD card (IMPORTANT): This prepares the card for use with the camera and deletes any existing data. Confirm 'Yes' when prompted.

3.5 PIR Sensor Test

In 'TEST' mode, you can test the Passive Infrared (PIR) sensors to ensure they are functioning correctly. Move your hand in front of the central and side PIR sensors. A blue indicator light will flash when motion is detected, confirming the sensors are active.

4. Operating Instructions

Understanding the camera's modes and features will help you capture the best footage.

4.1 Photo and Video Modes

The camera supports 60MP still images and 4K Ultra HD videos. You can select from Photo, Video, or Photo+Video modes in the settings menu to suit your monitoring needs. The advanced H.264 video encoding ensures efficient storage and MP4 format compatibility.

4K Video Quality

Example of vivid details captured in 4K resolution by the camera.

4.2 Trigger Speed and Detection Range

Equipped with 3 PIR sensors, the camera offers a 120° wide detection range and an ultra-fast 0.1-second trigger speed. This ensures that moving targets entering the detection zone are captured quickly and efficiently.

0.1s Fast Trigger

Visual representation of the camera's rapid 0.1-second trigger speed.

120 Degree Detection Range

Diagram illustrating the 120-degree wide detection range of the PIR sensors.

4.3 Night Vision

The camera features 40pcs 850nm IR LEDs for clear night vision, allowing you to capture detailed images and videos in low-light conditions without disturbing wildlife.

Ultra Clear Night Vision

Comparison showing the clarity of night vision captured by the CEYOMUR camera.

4.4 Wi-Fi 6 Connectivity and App Usage

Utilize the built-in Wi-Fi 6 for fast pairing and connection with your smartphone via the free 'TrailCam Go' app. This allows you to preview videos, download files, and adjust settings without physically removing the camera. The Wi-Fi signal range is limited to approximately 33 feet (10 meters).

TrailCam Go App Connection Steps

Step-by-step guide for connecting the camera to the 'TrailCam Go' app via Wi-Fi.

4.5 Solar Power and Dual Power Supply

The integrated solar panel and built-in 5200mAh lithium-ion battery provide continuous power, reducing the need for frequent battery changes. The solar panel is adjustable by approximately 5° to optimize charging efficiency based on sunlight conditions. For added reliability, the camera also supports 4 AA batteries as a backup power source.

Solar Powered Trail Camera

Illustration of the camera's non-stop solar powered feature.

4.6 Mounting and Placement

Use the included mounting strap to secure the camera to a tree or pole. Ensure the camera is positioned to capture the desired area, avoiding direct sunlight or strong artificial light sources that might interfere with sensor performance. The integrated design with the lens and screen on the same side aids in intuitive aiming.

Camera Features Diagram

Diagram highlighting key features including the adjustable solar panel and side SD card slot.

5. Maintenance

Proper maintenance ensures the longevity and performance of your camera.

  • Cleaning: Regularly wipe the lens, PIR sensors, and solar panel with a soft, dry cloth to remove dust, dirt, or moisture. Avoid abrasive cleaners.
  • Battery Care: If using optional AA batteries, replace them when the battery indicator is low. For optimal performance, use high-quality alkaline or rechargeable AA batteries.
  • SD Card Management: Periodically back up important footage from the SD card to a computer and format the card in the camera to maintain optimal recording performance.
  • Storage: When not in use for extended periods, store the camera in a cool, dry place, ideally with the built-in battery partially charged.

6. Troubleshooting

If you encounter issues with your CEYOMUR Trail Camera, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Camera not triggering/missing eventsIncorrect PIR sensitivity setting; Obstruction in front of sensors; Subject too far or moving too fast/slow.Adjust PIR sensitivity in settings; Clear any obstructions; Ensure subject is within detection range and moving at an appropriate speed.
Poor image/video qualityDirty lens; Low light conditions; Incorrect resolution settings.Clean the lens; Ensure adequate lighting or proper night vision activation; Check and adjust photo/video resolution settings.
Wi-Fi connection issuesOut of Wi-Fi range; App not updated; Incorrect connection procedure.Ensure you are within 33 feet (10 meters) of the camera; Update 'TrailCam Go' app; Follow the app connection steps carefully.
Short battery lifeInsufficient solar charging; High frequency of triggers; Cold weather; Old/low-quality AA batteries.Ensure solar panel is clean and exposed to direct sunlight; Reduce trigger frequency; Consider using fresh, high-quality AA batteries in cold conditions.
SD card errorSD card not formatted; Corrupted card; Incompatible card.Format the SD card in the camera; Try a different, high-quality SD card (Class 10 or higher recommended).

7. Specifications

Detailed technical specifications for the CEYOMUR 4K Solar Trail Camera:

FeatureDetail
ModelCY75
Still Image ResolutionUp to 60 MP
Video Resolution4K Ultra HD (H.264, MP4)
Trigger Speed0.1 seconds
PIR Detection Range120° wide detection, up to 65ft/20m
Night Vision40pcs 850nm IR LEDs (Black and White)
Power SourceBuilt-in 5200mAh Lithium Battery, Solar Powered, Optional 4xAA Batteries
ConnectivityBuilt-in Wi-Fi 6, Bluetooth
StorageSupports SD Card (32GB included)
Water ResistanceIP66 Waterproof
Display2-inch LCD screen
Dimensions (L x W x H)5.6 x 4.2 x 3.7 inches
Weight1.5 pounds

8. Warranty and Support

CEYOMUR is committed to providing excellent customer support. If you encounter any difficulties or have questions regarding your camera, please do not hesitate to contact our professional service team. We are dedicated to providing timely and effective assistance to ensure a positive user experience.

For support, please refer to the contact information provided on the product packaging or the official CEYOMUR website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.