1. Important Safety Information
WARNING: Ensure the vanity is properly assembled and the stool is stable to prevent tipping. Avoid placing heavy items on top of the vanity. Keep the vanity away from sharp edges and pinch points. Always follow assembly instructions carefully.
- Do not stand on the vanity desk or stool.
- Keep small parts away from children during assembly.
- Periodically check all connections and fasteners to ensure they remain tight.
- Avoid exposing the vanity to excessive moisture or direct sunlight.
2. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
Figure 2.1: Package contents and dimensions overview.
- 1 x Vanity Table (Main Desk Unit)
- 1 x Dimmable Mirror (with integrated lights)
- 1 x Storage Stool (with flip-top storage)
- 1 x Hardware Pack (screws, bolts, tools, etc.)
- Instruction Manual (this document)
3. Assembly Instructions
Assembly requires two adults and approximately 1-2 hours. Please follow the step-by-step instructions provided in the separate assembly guide included in your hardware pack. Ensure you have a clear, spacious area for assembly.
3.1. Pre-Assembly Checklist
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Identify all hardware parts against the provided list in the assembly guide.
- Ensure you have the necessary tools (usually a screwdriver and Allen wrench, often included).
3.2. General Assembly Steps (Refer to detailed guide for specifics)
- Assemble the Main Desk Frame: Connect the side panels and back panels to form the base of the vanity desk.
- Install the Drawer Slides: Attach the drawer slides to the desk frame according to the guide.
- Assemble the Drawer: Construct the drawer box and attach the front panel and handle. Insert the assembled drawer into the slides.
- Attach the Top Surface: Secure the corner top surface to the main desk frame.
- Assemble the Upper Shelf Unit: Connect the upper side panels and back panel. Install the barn door mechanism and the barn door.
- Mount the Mirror: Carefully attach the dimmable mirror to the designated area on the upper shelf unit. Connect any necessary wiring for the lights.
- Install Hooks: Attach the six hooks to the side panels of the upper shelf unit.
- Assemble the Stool: Connect the stool legs to the stool base. Attach the cushioned top, ensuring the flip-top storage mechanism functions correctly.
Figure 3.1: The ARTETHYS Small Corner Vanity Desk Set after complete assembly.
4. Operating Instructions
4.1. Dimmable Mirror Lights
The integrated mirror features adjustable LED lighting with three color modes and dimming functionality.
Figure 4.1: Three adjustable light modes for the mirror.
- Power On/Off: Touch the power icon on the mirror surface to turn the lights on or off.
- Change Color Mode: With the lights on, touch the mode icon (often a circle or 'M') to cycle through the three light modes:
- Cold Light: Suitable for office makeup or bright environments.
- Warm Light: Ideal for outdoor makeup or natural lighting.
- Warm Yellow: Best for party makeup or evening ambiance.
- Adjust Brightness (Dimming): Press and hold the power icon or a dedicated brightness icon (if present) to adjust the light intensity. Release when the desired brightness is reached.
Figure 4.2: Touch controls on the mirror for light operation.
4.2. Storage Features
- Main Drawer: Pull the handle to open the main drawer for storing cosmetics and accessories.
Figure 4.3: Main storage drawer.
- Barn Door Storage: Slide the barn door to access the hidden storage compartments on the upper shelf.
Figure 4.4: Sliding barn door storage.
- Side Hooks: Utilize the six hooks on the side panels for hanging necklaces, bracelets, or other jewelry.
- Stool Storage: Lift the cushioned top of the stool to reveal an internal storage compartment.
Figure 4.5: Overview of sufficient storage space.
5. Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Mirror Care: Clean the mirror surface with a glass cleaner and a lint-free cloth. Do not spray cleaner directly onto the mirror to avoid liquid seeping into the electrical components.
- Hardware Check: Periodically inspect all screws and fasteners to ensure they are tight. Retighten if necessary to maintain stability.
- Avoid Overloading: Do not place excessively heavy items on the vanity desk or in the drawers to prevent structural damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. |
|
|
| Vanity desk or stool is wobbly. |
|
|
| Drawer does not slide smoothly. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | ARTETHYS |
| Model Number | US-IF056-WH-X-2 |
| Product Dimensions (Vanity) | 28"D x 62.98"W x 17.5"H (71.12 cm D x 160 cm W x 44.45 cm H) |
| Item Weight | 74.1 pounds (33.61 kg) |
| Frame Material | Engineered Wood |
| Furniture Finish | MDF |
| Color | White |
| Assembly Required | Yes |
| Mirror Features | Dimmable, 3 Adjustable Light Modes (Cold, Warm, Warm Yellow) |
| Storage Features | 1 Drawer, Barn Door Storage, 6 Hooks, Stool with Flip-Top Storage |
8. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical assistance, missing parts, or warranty claims, please contact ARTETHYS customer support.
- Customer Support: Refer to the contact information provided in your purchase documentation or visit the official ARTETHYS brand store.
- Online Store: ARTETHYS Brand Store on Amazon
