TAGRY H08 Active Noise Cancelling Headphones User Manual

Introduction

The TAGRY H08 Active Noise Cancelling Headphones are designed to provide a superior audio experience with advanced noise cancellation technology. Enjoy deep bass, long playtime, and versatile connectivity options for travel, home, or office use.

Image: Front view of the TAGRY H08 Active Noise Cancelling Headphones in black.

What's in the Box

• TAGRY H08 Headphones
• AUX 3.5mm Audio Cable
• Travel Pouch
• Type C Charging Cable
• User Manual

Setup

Charging the Headphones

Before first use, fully charge your headphones.

• Connect the Type C Charging Cable to the headphone's charging port.
• Connect the other end to a compatible USB power source.
• A 5-minute charge provides approximately 10 hours of playtime.
• A full charge offers up to 100 hours of listening time.

Image: Close-up of the TAGRY H08 Headphones with the USB-C charging cable connected.

Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the Power button until the LED indicator light flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, PC), enable Bluetooth and search for "TAGRY H08".
4. Select "TAGRY H08" to connect. The LED indicator will turn solid blue when successfully paired.

Video: Official TAGRY H08 Active Noise Cancelling Headphones product video demonstrating features including Bluetooth pairing.

Wired Connection

For a wired connection, use the included 3.5mm AUX Audio Cable.

• Plug one end of the AUX cable into the headphone's 3.5mm jack.
• Plug the other end into your audio device's AUX port.
• The headphones can be used in wired mode even if the battery is depleted.

Operating

Power On/Off

• To Power On: Press and hold the Power button until the LED indicator lights up.
• To Power Off: Press and hold the Power button until the LED indicator turns off.

Active Noise Cancellation (ANC)

The advanced ANC technology reduces up to 95% of ambient noise.

• To activate ANC: Press the ANC button. The ANC indicator light will illuminate.
• To deactivate ANC: Press the ANC button again. The ANC indicator light will turn off.

Image: Side view of the TAGRY H08 Headphones highlighting the ANC button and noise reduction waves.

Button Controls

Comfort and Portability

The headphones feature ultra-soft protein leather ear cups and an adjustable headband for comfortable long-term wear. The foldable design allows for easy storage and portability in the included travel pouch.

Image: Close-up of the adjustable headband on the TAGRY H08 Headphones.

Maintenance

• Regularly charge your headphones to maintain battery health.
• Clean the ear cups and headband with a soft, dry cloth.
• For hard-to-reach areas, a pointed cotton swab can be used.
• Avoid exposing the headphones to extreme temperatures or direct sunlight.

Troubleshooting

Common Issues and Solutions

• Headphones not pairing: Ensure the headphones are in pairing mode (flashing blue/red light). Check your device's Bluetooth settings and try reconnecting.
• Frequent disconnections: Ensure the headphones are within the Bluetooth range of your device. Avoid obstacles that may interfere with the signal.
• Noise cancellation not effective: Ensure the ANC feature is activated. Check that the ear cups form a good seal around your ears.
• No sound: Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired or the AUX cable is securely connected.

Video: A customer's video demonstrating a disconnection issue, which can be resolved by ensuring the headphones are within Bluetooth range and free from interference.

Specifications

Warranty and Support

TAGRY products are designed for durability and performance. For specific warranty details or technical support, please refer to the official TAGRY website or contact their customer service. Some reviews indicate a lifetime warranty for the product.

For further assistance, visit the TAGRY Store on Amazon.