1. Introduction
Thank you for choosing the PARTPHONER 23-inch Modern Ceramic Table Lamp Set. This set of two lamps features a contemporary minimalist design with a beige ceramic base and linen lampshade, ideal for enhancing the ambiance of your living room, bedroom, or office. This manual provides essential information for safe setup, operation, and maintenance of your new lamps.
Image: Two PARTPHONER 23-inch Modern Ceramic Table Lamps with beige textured ceramic bases and light-colored linen shades, providing soft illumination.
2. Safety Information
- Always unplug the lamp from the power outlet before cleaning, changing the light bulb, or performing any maintenance.
- Do not use bulbs exceeding the specified wattage (Max 60W).
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
- Keep the lamp away from water or other liquids. This product is not waterproof.
- Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- 2 x Ceramic Lamp Bases (Beige)
- 2 x Linen Lampshades (assembly required)
- 2 x Harp Assemblies
- 2 x Finials
- 1 x Instruction Manual
Note: Light bulbs (E26 base, Max 60W) are not included and must be purchased separately.
Image: All parts of the lamp set, including the ceramic bases, unassembled lampshade fabric, metal rings for the shade, harp, and finial, are displayed on a patterned rug.
4. Setup Instructions
Follow these steps to assemble your PARTPHONER table lamps:
- Unpack Components: Carefully remove all parts from the packaging.
- Assemble Lampshade: The lampshade fabric comes flat. Attach the two metal rings (one with spokes for the top, one plain for the bottom) to the fabric using the integrated clips. Ensure the fabric is pulled taut and secure the vertical seam using the Velcro strip.
- Attach Harp: Squeeze the two arms of the harp together and insert them into the saddle on the lamp base. Release the arms to secure the harp.
- Install Light Bulb: Screw an E26 base light bulb (Max 60W, not included) into the lamp socket.
- Place Lampshade and Secure: Carefully place the assembled lampshade onto the harp. Screw the finial onto the threaded rod at the top of the harp to secure the lampshade in place.
- Connect to Power: Plug the lamp's power cord into a standard 120V AC power outlet.
Video: A detailed demonstration of unboxing and assembling the PARTPHONER table lamp, including attaching the harp, installing the bulb, and securing the lampshade.
5. Operating Instructions
To operate your PARTPHONER table lamp, locate the rotary switch on the lamp socket. Turn the switch clockwise to turn the lamp ON. Turn it counter-clockwise to turn the lamp OFF.
6. Maintenance
To ensure the longevity and appearance of your lamps:
- Cleaning: Dust the lamp base and shade regularly with a soft, dry cloth. For stubborn spots on the ceramic base, use a slightly damp cloth and dry immediately. Do not use harsh chemicals or abrasive cleaners.
- Bulb Replacement: Always unplug the lamp before replacing the light bulb. Allow the bulb to cool completely before touching it.
- Shade Care: The linen lampshade can be gently spot cleaned with a mild detergent and a damp cloth if necessary. Avoid saturating the fabric.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Lamp is unplugged. | Ensure the power cord is securely plugged into a working outlet. |
| Light bulb is loose or burnt out. | Tighten the light bulb or replace it with a new one (E26, Max 60W). | |
| Power outage or tripped circuit breaker. | Check your home's circuit breaker or test the outlet with another device. | |
| Light flickers. | Loose light bulb. | Tighten the light bulb. |
| Incorrect bulb wattage. | Ensure the bulb wattage does not exceed 60W. |
8. Specifications
- Brand: PARTPHONER
- Model Number: STR-DL-0005
- Product Dimensions: 12.5"D x 12.5"W x 23"H
- Base Material: Ceramic
- Shade Material: Linen
- Finish Type: Painted
- Color: Beige
- Lamp Type: Table Lamp
- Switch Type: Rotary
- Bulb Base: E26
- Max Wattage: 60 watts
- Voltage: 120 Volts
- Number of Light Sources: 2 (per set)
- Indoor/Outdoor Usage: Indoor
- Water Resistance Level: Not Water Resistant
Image: A visual representation of the lamp's dimensions, highlighting its 23-inch height and 12.5-inch shade diameter.
9. Warranty
This PARTPHONER product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
10. Support
For further assistance, troubleshooting, or warranty inquiries, please contact PARTPHONER customer support through the retailer's platform or visit our official website for contact information.