Introduction
The WORX Landroid Vision WR205E is an advanced robot lawnmower designed for efficient and autonomous lawn care. Utilizing a high-resolution camera and intelligent Artificial Intelligence (AI), this model operates without the need for a physical boundary wire, simplifying installation and reducing maintenance. Its adaptive AI system processes environmental data rapidly to ensure precise navigation and obstacle avoidance.
The Landroid Vision is equipped with features such as Cut-to-Edge technology for neat borders, multi-zone management for complex garden layouts, and adaptive automatic scheduling. It is also part of the WORX PowerShare battery platform, allowing battery interchangeability with other WORX tools.
Safety Warning
Always read and understand all safety warnings and instructions provided with this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury. Ensure careful reading of the instructions for safe operation of the machine.
Setup
The WORX Landroid Vision WR205E is designed for quick and straightforward installation, typically within 30 minutes, as it does not require a perimeter wire or antenna. This eliminates the need for complex wiring around your lawn.
- Charging Station Placement: Select a suitable location for the charging station, ensuring it has access to a power outlet and is on a flat, level surface.
- Power Connection: Connect the charging station to the power supply.
- Initial Charge: Place the Landroid Vision on the charging station to allow the battery to fully charge before its first operation.
- App Connection: Download the official WORX mobile application (available for iOS and Android). Connect your Landroid Vision to the app via Wi-Fi or Bluetooth. The app will guide you through the initial setup and garden mapping process using the robot's visual recognition camera.
The robot's AI technology allows it to map your garden during its first pass, optimizing its mowing paths autonomously even in complex environments.
Operating
The Landroid Vision WR205E operates autonomously, guided by its 4K camera and adaptive AI. It detects, identifies, and avoids obstacles, adapting to various lawn conditions and slopes up to 30%.
- AI Navigation and Obstacle Avoidance: The robot's advanced neural network processes visual information in real-time (0.05 seconds) to navigate your lawn, reliably avoiding objects, animals, and sensitive plants. This ensures safe operation and prevents collisions.
- Cut-to-Edge Technology: The Landroid Vision is designed to mow precisely along the edges of your lawn, minimizing the need for manual trimming and ensuring a consistently neat finish.
- Multi-Zone Management: Through the mobile application, you can define and manage multiple mowing zones within your garden, allowing the robot to optimize its schedule and coverage for each area.
- Adaptive Automatic Scheduling: The robot can be programmed via the app to follow an automatic schedule, adapting its mowing times based on lawn growth and weather conditions.
- Night Mowing (Optional): With an optional LED headlight accessory, the Landroid Vision can safely operate at night. Its vision system is capable of detecting and avoiding nocturnal animals, ensuring their safety.
- Mobile Application Control: The WORX app provides comprehensive control over your Landroid Vision. You can start/stop mowing, adjust settings, manage zones, customize schedules, and receive status updates from anywhere.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Landroid Vision WR205E.
- Cleaning: Periodically clean the robot's chassis, cutting deck, and wheels to remove grass clippings, dirt, and debris. Use a soft brush or cloth. Avoid using high-pressure water jets directly on the robot.
- Blade Replacement: The cutting blades should be inspected regularly and replaced when they become dull or damaged. Refer to the specific instructions in the full product manual for blade replacement procedures. Always wear protective gloves when handling blades.
- Battery Care: The Landroid Vision uses a WORX PowerShare 20V battery. Ensure the battery is charged regularly, especially during periods of non-use (e.g., winter storage). The PowerShare system allows you to use the same battery across a wide range of WORX cordless tools.
- Software Updates: The robot receives Over-the-Air (OTA) software updates via Wi-Fi, ensuring its AI and functionalities are continuously improved. Ensure your robot is connected to Wi-Fi for these updates.
Troubleshooting
For most issues, consult the WORX mobile application for diagnostic information and guided solutions. Here are some general troubleshooting tips:
- Robot Stuck: If the robot gets stuck, check for uneven terrain, deep ruts, or obstacles it might not have detected. Clear the path and reposition the robot. Ensure the lawn is free of small, easily overlooked items.
- Poor Mowing Performance: Check the blades for sharpness and damage. Replace them if necessary. Ensure the cutting height is set appropriately for your lawn.
- Connectivity Issues: If the robot loses Wi-Fi or Bluetooth connection, ensure your home network is functioning correctly and the robot is within range. Restarting the robot and the app can often resolve minor connectivity problems.
- Error Messages: Refer to the WORX app for specific error codes and their corresponding solutions. The app provides detailed guidance for resolving various operational issues.
Specifications
| Model Number | WR205E |
| Brand | WORX |
| Recommended Lawn Area | Up to 550 m² |
| Dimensions (L x W x H) | 62.6 x 26.5 x 46 cm |
| Weight | 13.5 Kilograms |
| Battery Type | Lithium-ion (PowerShare 20V) |
| Cutting Width | 18 Centimeters |
| Adjustable Max Cutting Height | 60 Millimeters |
| Connectivity | Wi-Fi, Bluetooth |
| Power Source | Battery Powered |
| Operation Mode | Automatic |
| Water Resistance | IPX5 (Designed to operate in rain) |
Warranty Information
The WORX Landroid Vision WR205E robot lawnmower, its battery, and charger come with a 3-year warranty (2 years standard + 1 year extended). To activate the extended 1-year warranty, the product must be registered within 30 days of purchase on the official WORX website: eu.worx.com. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or spare parts, please refer to the following resources:
- WORX Mobile Application: The app provides comprehensive support, including FAQs, troubleshooting guides, and direct contact options for customer service.
- Official WORX Website: Visit eu.worx.com for product information, detailed manuals, and support contact details specific to your region.
- Customer Service: Contact WORX customer service directly for personalized assistance with any issues or questions regarding your Landroid Vision.
