Important Safety Instructions
Please read all instructions carefully before using the appliance. Keep this manual for future reference.
- Ensure proper ventilation in the kitchen area during operation.
- This appliance is designed for domestic use only.
- Do not leave the appliance unattended during operation.
- Keep children away from the appliance during use.
- In case of a gas leak, immediately close the main gas valve, open windows, and do not operate any electrical switches. Contact qualified personnel.
- Always use appropriate cookware for the burner size.
- Do not use abrasive cleaners or sharp objects for cleaning.
Product Overview
The Cecotec Bolero Squad G 3200S is a modern gas hob featuring a sleek black glass finish and three high-performance burners, including a powerful triple crown WOK burner. It is equipped with individual cast iron grates for stability and durability, electric ignition, and a valve safety system for enhanced user safety.
Image: Top-down view of the Cecotec Bolero Squad G 3200S Gas Hob with all three burners ignited, showing blue flames. The hob features a black glass surface and three control knobs at the front.
What's in the Box
Upon unpacking, please ensure all components are present and undamaged:
- 1 x Cecotec Bolero Squad G 3200S Gas Hob
- 3 x Individual Circular Grate Supports (Cast Iron)
- 1 x Gas Converter Injector Kit (for butane gas conversion)
- 1 x User Manual
Setup and Installation
Dimensions and Cut-out Requirements
Before installation, verify the dimensions of your countertop cut-out. The hob requires specific space for proper fitting and ventilation.
Image: A diagram illustrating the overall dimensions of the gas hob, measuring 58 cm in width and 51 cm in depth, with a height of approximately 10 cm.
Image: A technical drawing indicating the required countertop cut-out dimensions for installation: 56 cm in width and 48 cm in depth.
Gas Connection
This appliance is designed for natural gas. An accessory for butane gas conversion is included. Installation and connection to the gas supply must be performed by a qualified and certified technician in accordance with local regulations and standards.
- Ensure the gas supply pressure matches the appliance requirements.
- Use only approved flexible gas hoses or rigid piping.
- Check for gas leaks using soapy water after connection. Never use an open flame.
Electrical Connection
The hob requires an electrical connection for the automatic ignition system. This connection must also be performed by a qualified electrician.
- Ensure the voltage and frequency match the appliance's specifications.
- The appliance must be properly earthed.
Operating Instructions
Igniting a Burner
To ignite a burner:
- Place appropriate cookware on the desired burner grate.
- Push down and turn the corresponding control knob counter-clockwise to the maximum flame position (large flame symbol).
- Hold the knob down for a few seconds until the flame is stable. The electric ignition will automatically spark.
- Once ignited, release the knob. If the flame extinguishes, repeat the process.
- Adjust the flame size by turning the knob between the maximum and minimum flame positions (large and small flame symbols).
Image: A close-up view of the three metallic control knobs on the black glass surface of the hob, showing their textured finish and clear markings for flame intensity.
Using the WOK Burner
The triple crown WOK burner provides high intensity heat for rapid cooking. It is ideal for stir-frying and large pots.
- Use a WOK pan or large pot that is stable on the WOK burner grate.
- Follow the same ignition procedure as other burners.
- Adjust the flame to achieve the desired heat level.
Image: An overhead view of the gas hob with all three burners actively producing blue flames, highlighting the powerful triple crown WOK burner on the right.
Image: A close-up shot of a single gas burner with an orange flame, demonstrating the heat output and burner design.
Safety Valve System
The burners are equipped with a safety valve system that automatically cuts off the gas supply if the flame accidentally extinguishes. This feature enhances safety by preventing gas leaks.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your gas hob.
Cleaning the Glass Surface
- Allow the hob to cool completely before cleaning.
- Use a soft cloth or sponge with a mild detergent and warm water.
- For stubborn stains, use a non-abrasive glass ceramic cleaner.
- Wipe dry with a clean cloth to prevent water marks.
Cleaning Burners and Grates
- Remove the cast iron grates and burner caps/crowns when the hob is cool.
- Wash them with warm soapy water. For heavily soiled parts, soak them before cleaning.
- Ensure all parts are completely dry before reassembling them. Moisture can affect ignition.
- Do not use abrasive pads or harsh chemicals that could damage the finish.
Image: A detailed view of a single gas burner with its black cap and the robust cast iron grate, emphasizing the components that require regular cleaning.
Troubleshooting
If you encounter issues with your gas hob, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite | No gas supply, clogged burner, wet burner parts, faulty ignition. | Check gas supply, clean burner ports, ensure parts are dry, contact service if ignition is faulty. |
| Flame extinguishes after releasing knob | Safety valve not activated, knob not held long enough. | Hold the knob down for a few more seconds after ignition. Ensure the thermocouple is clean. |
| Irregular or yellow flame | Clogged burner ports, incorrect gas type, improper air mixture. | Clean burner ports. Verify correct gas type and consult a technician for air mixture adjustment. |
| Gas smell | Gas leak. | Immediately close main gas valve, ventilate area, do not use electrical switches, contact qualified technician. |
If the problem persists after attempting these solutions, please contact customer support or a qualified service technician.
Specifications
| Feature | Detail |
|---|---|
| Brand | Cecotec |
| Model Number | A01_EU01_100189 |
| Number of Burners | 3 |
| Total Power Output | 6250W |
| Burner Configuration | 1 x WOK Burner (3500W), 1 x Medium Burner (1750W), 1 x Small Burner (1000W) |
| Surface Material | Black Crystal Glass |
| Grates Material | Cast Iron |
| Ignition Type | Electric Ignition |
| Safety Feature | Valve Safety System (Flame Failure Device) |
| Fuel Type | Natural Gas (Butane conversion accessory included) |
| Product Dimensions (W x D x H) | 58 cm x 51 cm x 10 cm (approx.) |
| Cut-out Dimensions (W x D) | 56 cm x 48 cm (approx.) |
Warranty and Support
Warranty Information
Cecotec products are covered by a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the warranty card included with your product or visit the official Cecotec website.
In case of a defective or damaged product, please consult the return policy of your retailer. For purchases made on Amazon, you can find information on returns and refunds on their dedicated help pages.
Customer Support
For technical assistance, spare parts, or any questions regarding your Cecotec Bolero Squad G 3200S Gas Hob, please contact Cecotec customer support. Contact details can typically be found in the product packaging or on the official Cecotec website.
When contacting support, please have your product model number (A01_EU01_100189) and purchase date readily available.
