Introduction
This manual provides essential information for the assembly, operation, and maintenance of your SUNSHINE VALLEY Metal Outdoor Swivel Patio Chairs. Please read these instructions carefully before assembly and use to ensure safe and optimal performance of your product. Keep this manual for future reference.
Image: A pair of SUNSHINE VALLEY Metal Outdoor Swivel Patio Chairs in red, positioned on a patio with a decorative fireplace in the background. The chairs feature black metal frames and thick red cushions.
Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Always assemble according to the instructions provided.
- Do not exceed the maximum weight capacity of 350 lbs (approximately 158 kg) per chair to ensure stability and safety.
- Ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Use on a flat, stable surface to prevent tipping.
- Do not stand on the chairs.
- Avoid exposing cushions to prolonged direct sunlight or heavy rain when not in use to extend their lifespan.
Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.
- • Chair Frames (2 sets)
- • Seat Cushions (2)
- • Back Cushions (2)
- • Assembly Hardware (bolts, nuts, washers, Allen wrench)
- • Instruction Manual (this document)
Note: The product is delivered in two separate boxes. Ensure both boxes have arrived before starting assembly.
Image: A diagram illustrating the dimensions of a single swivel patio chair, including height (35.03"), width (28.35"), depth (31.5"), and cushion thickness (5.75").
Setup and Assembly
Assembly is required for these patio chairs. It is recommended that two people assemble the chairs for ease and safety. Approximate assembly time per chair is 60 minutes.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
- Identify Parts: Refer to the included parts list and diagrams to identify each component. Note that hardware may be shrink-wrapped; verify part numbers carefully.
- Assemble Base: Attach the chair base components using the provided bolts, nuts, and washers. Do not fully tighten bolts until all components are loosely assembled.
- Attach Seat Frame: Secure the seat frame to the base.
- Attach Backrest: Connect the backrest to the seat frame and armrests. This step may require two people to align properly.
- Tighten All Fasteners: Once all parts are aligned and loosely assembled, gradually tighten all bolts using the provided Allen wrench. Ensure all connections are firm and secure.
- Place Cushions: Position the 5.75-inch thick seat and back cushions onto the chair frames. The cushions are designed for high resilience and comfort.
Tip: While an Allen wrench is provided, using a combination wrench for larger bolts may facilitate assembly.
Operating Instructions
Your SUNSHINE VALLEY patio chairs are designed for comfort and relaxation with swivel and rocking functionality.
- Swivel Function: The chair base allows for a full 360-degree rotation. Simply apply gentle pressure with your feet to turn the chair in any direction.
- Rocker Function: The chair is designed to provide a smooth rocking motion. Lean back gently to initiate the rocking movement.
- Cushion Comfort: The 5.75" extra thick cushions, filled with 28D density sponge, offer high resilience for extended comfortable sitting.
Image: A red swivel patio chair shown with circular arrows indicating its 360-degree rotation capability, highlighting its convenience and fun aspect.
Maintenance
Proper care and maintenance will extend the life and appearance of your patio chairs.
- Frame Care: The metal frame features E-COATING and POWDER-COATING for dual rust prevention. Wipe clean with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. No special care is typically needed for the frame.
- Cushion Care (CUSHION PRO™ Technology): The cushion fabric is designed with CUSHION PRO™ technology, offering excellent waterproof, oil-proof, and stain-resistant properties.
- For spills and dirt, wipe down easily with a damp cloth.
- The cushion covers are removable for more thorough cleaning if necessary.
- Allow cushions to air dry completely before storing or replacing.
- While resistant, prolonged exposure to extreme weather conditions (heavy rain, intense sun) should be minimized by storing cushions indoors or using protective covers.
- Hardware Check: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
Image: A close-up view of the red cushion fabric with water droplets on its surface, illustrating the waterproof feature of CUSHION PRO™ Technology. Text indicates it is water-proof, oil-resistant, stain-resistant, UV-resistant, and easy-to-clean.
Image: A diagram illustrating the "Excellent All Weather Performance" of the chair frame, detailing the E-COATING and POWDER-COATING dual rust prevention techniques for durability in patio and outdoor environments.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly or unstable. | Loose bolts or uneven surface. | Ensure all assembly bolts are securely tightened. Move the chair to a flat, level surface. |
| Difficulty with swivel or rocking motion. | Obstruction in the mechanism or uneven weight distribution. | Check for any debris or obstructions under the chair base. Ensure weight is centered when using the functions. |
| Cushions appear flattened or uncomfortable. | Normal compression over time or improper care. | The cushions are designed with high resilience. Allow them to air out and fluff periodically. Ensure they are not stored compressed for long periods. |
| Rust spots on the metal frame. | Damage to protective coating or extreme environmental exposure. | Clean the affected area and apply a rust-inhibiting paint if the coating is compromised. Consider using protective covers in harsh weather. |
Specifications
- Brand: SUNSHINE VALLEY
- Model Number: E02GF150-RD
- Color: Red
- Product Dimensions (D x W x H): 31.5" x 28.35" x 35.03"
- Seat Depth: 31.5 inches
- Chair Backrest Width: 28.35 inches
- Cushion Thickness: 5.75 inches
- Weight Capacity: Up to 350 lbs per chair
- Frame Material: Metal (E-COATING and POWDER-COATING)
- Cushion Fill Material: 28D Density Sponge
- Cushion Fabric Technology: CUSHION PRO™ (Water-proof, Oil-resistant, Stain-resistant, UV-Resistant)
- Movement: 360° Swivel, Rocker
- Indoor/Outdoor Usage: Outdoor
- Included Components: 2 Chairs, 2 Seat Cushions, 2 Back Cushions, Assembly Hardware
Warranty and Support
SUNSHINE VALLEY is committed to providing high-quality products. For specific warranty details, please refer to the warranty card included with your purchase or contact SUNSHINE VALLEY customer service directly.
If you have any questions about product assembly, operation, or require assistance with missing/damaged parts, please contact our customer service team. Contact information can typically be found on the product packaging or the official SUNSHINE VALLEY website.
We strive to provide worry-free after-sales service and friendly customer support.
