Wildgame Innovations Ridgeline Wraith Trail Camera Combo

1. Introduction

Thank you for choosing the Wildgame Innovations Ridgeline Wraith Trail Camera Combo. This manual provides essential information for the proper setup, operation, and maintenance of your trail camera. Please read these instructions carefully before use to ensure optimal performance and longevity of your device.

1.1 Package Contents

Verify that all items listed below are included in your package:

• Wildgame Innovations Ridgeline Wraith Trail Camera
• Batteries (Quantity: 8 AA)
• SD Card (Capacity: 16 GB)
• Bungee Cords (Quantity: 2)

Image 1.1: The Ridgeline Wraith Trail Camera with included batteries and 16GB SD card.

2. Product Overview

The Ridgeline Wraith Trail Camera is designed for outdoor monitoring, capturing high-resolution images and videos of wildlife. Its robust design and infrared capabilities make it suitable for various environmental conditions.

2.1 Key Features

• High Definition Imaging: 26 Megapixel (MP) camera for clear still images.
• Video Recording: HD 720P video resolution with a 16:9 wide angle.
• Fast Trigger Speed: Less than 0.5 seconds to capture fast-moving subjects.
• Infrared Flash: 75-foot infrared flash distance for night vision without disturbing wildlife.
• Power Source: Battery powered for remote deployment.
• Mounting: Designed for tree mounting with included bungee cords.

3. Setup

3.1 Battery Installation

1. Locate the battery compartment on the camera.
2. Open the compartment latch and insert 8 AA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment securely to maintain weather resistance.

3.2 SD Card Installation

1. Locate the SD card slot, typically near the battery compartment or control panel.
2. Insert the provided 16 GB SD card into the slot until it clicks into place. Ensure the card is oriented correctly.
3. To remove, gently push the SD card in until it springs out.

Image 3.2: The camera with its control panel and SD card slot accessible.

3.3 Mounting the Camera

The camera is designed for tree mounting using the included bungee cords.

1. Select a sturdy tree or post at the desired height for monitoring.
2. Thread one bungee cord through the mounting slots on the back of the camera.
3. Wrap the bungee cord around the tree and secure it tightly, ensuring the camera is stable and level.
4. Adjust the camera angle to cover the desired area.

Image 3.3a: Side view of the camera securely mounted to a tree.

Image 3.3b: Full view of the camera mounted on a tree in its natural environment.

Image 3.3c: Front view of the camera mounted on a tree, ready for operation.

4. Operating Instructions

4.1 Powering On/Off

• To power on, slide the power switch to the 'ON' position. The indicator light will illuminate briefly.
• To power off, slide the power switch to the 'OFF' position.

4.2 Basic Settings

Access the camera's menu to configure settings such as date, time, capture mode (photo, video, or both), and trigger delay. Refer to the on-screen prompts for navigation using the control buttons.

• Date and Time: Set the current date and time for accurate timestamping of captures.
• Capture Mode: Select between photo, video, or photo+video modes based on your monitoring needs.
• Resolution: Adjust photo (up to 26 MP) and video (720P) resolution settings.
• Trigger Delay: Set the delay between consecutive captures after a trigger event.

4.3 Retrieving Media

To access captured photos and videos:

1. Power off the camera.
2. Remove the SD card from its slot.
3. Insert the SD card into a compatible card reader connected to a computer or other viewing device.
4. Transfer or view your media files.

5. Maintenance

5.1 Cleaning

• Regularly wipe the camera lens and PIR sensor window with a soft, dry cloth to ensure clear images and proper detection.
• Keep the camera housing free from dirt, dust, and debris.

5.2 Battery Replacement

Replace batteries when the low battery indicator appears or when performance degrades. Always use fresh, high-quality AA alkaline or lithium batteries for best results.

5.3 SD Card Management

• Periodically format the SD card using the camera's menu option or a computer to maintain optimal performance and prevent data corruption.
• Ensure the SD card is not full to avoid missed captures.

6. Troubleshooting

If you encounter issues with your camera, refer to the following common problems and solutions:

• Camera not powering on: Check battery installation and ensure batteries are fresh.
• No images/videos captured: Verify SD card is inserted correctly and has sufficient space. Check camera settings for proper capture mode and trigger delay. Ensure PIR sensor is clear.
• Poor image/video quality: Clean the camera lens. Check for obstructions in front of the camera.
• Short battery life: Use high-quality batteries. Reduce the frequency of captures or video length in settings.

For further assistance, please contact Wildgame Innovations customer support.

7. Specifications

8. Warranty and Support

Wildgame Innovations products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Wildgame Innovations website. Keep your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Wildgame Innovations customer service. Contact details can typically be found on the manufacturer's website or product packaging.

You can visit the Wildgame Innovations store for more information: Wildgame Innovations Store