Memorex MX-BCD100

Memorex MX-BCD100 Portable AM/FM Top Loading CD Player Instruction Manual

Model: MX-BCD100

1. Introduction

This manual provides essential information for the safe and efficient operation of your Memorex MX-BCD100 Portable AM/FM Top Loading CD Player. Please read this manual thoroughly before using the device and retain it for future reference.

2. Safety Information

3. Package Contents

Verify that all items listed below are included in your package:

4. Product Overview

Familiarize yourself with the various parts and controls of your Memorex MX-BCD100 unit.

Memorex MX-BCD100 Portable CD Player front view

Figure 4.1: Front view of the Memorex MX-BCD100 Portable CD Player.

Front Panel Controls

Close-up of Memorex MX-BCD100 front panel controls

Figure 4.2: Detailed view of the front panel, showing the LED display, control buttons, and knobs.

Side and Top Panel Features

Memorex MX-BCD100 side view with telescopic antenna extended

Figure 4.3: Side view showing the telescopic antenna and carrying handle.

Rear Panel and Power Options

Memorex MX-BCD100 rear view showing battery compartment and power input

Figure 4.4: Rear view illustrating the battery compartment and AC power input.

5. Setup

5.1 Powering the Unit

Your Memorex MX-BCD100 can be powered by either AC power or batteries.

AC Power Operation

  1. Ensure the unit's power switch is in the OFF position.
  2. Insert the small end of the AC power adapter into the AC power input jack on the rear of the unit.
  3. Plug the other end of the AC power adapter into a standard wall outlet.

Battery Operation

For portable use, the unit requires 6 'C' size batteries (not included).

  1. Ensure the unit's power switch is in the OFF position.
  2. Open the battery compartment cover located on the rear of the unit.
  3. Insert 6 'C' batteries, observing the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

Note: When the unit is connected to AC power, battery power is automatically disconnected. Remove batteries if the unit will not be used for an extended period to prevent leakage.

6. Operating Instructions

6.1 CD Playback

Memorex MX-BCD100 with top-loading CD compartment open and a CD inserted

Figure 6.1: Top-loading CD compartment with a disc in place.

  1. Lift the CD compartment door located on the top of the unit.
  2. Place a CD (or CD-R/RW) onto the center spindle with the label side facing up.
  3. Gently close the CD compartment door.
  4. Set the Function Selector to the 'CD' position.
  5. Press the PLAY/PAUSE (►/‖) button to begin playback. The track number will appear on the LED display.
  6. To pause playback, press PLAY/PAUSE (►/‖) again. Press it once more to resume.
  7. To stop playback, press the STOP (■) button.
  8. To skip to the next track, press the SKIP/SEARCH (▶▶) button.
  9. To go back to the beginning of the current track or to the previous track, press the SKIP/SEARCH (◀◀) button.
  10. To fast forward or rewind within a track, press and hold the SKIP/SEARCH (▶▶ or ◀◀) button.
  11. Adjust the volume using the VOL knob and bass using the BASS knob.

Repeat Function

Program Playback

You can program up to 20 tracks to play in a specific order.

  1. In STOP mode, press the PROG button. The LED display will show '01' and 'PROG' will flash.
  2. Use the SKIP/SEARCH (◀◀/▶▶) buttons to select the first track you wish to program.
  3. Press the PROG button again to confirm the selection. The display will show '02'.
  4. Repeat steps 2 and 3 to add more tracks to your program list.
  5. After programming all desired tracks, press the PLAY/PAUSE (►/‖) button to start programmed playback.
  6. To clear the program, press the STOP (■) button twice.

6.2 AM/FM Radio Operation

  1. Set the Function Selector to 'AM' or 'FM' as desired.
  2. Extend the telescopic antenna for optimal FM reception. For AM reception, rotate the unit for best signal.
  3. Rotate the Tuning Knob to select your desired radio station.
  4. Adjust the volume using the VOL knob.

6.3 Auxiliary Input (AUX)

Connect an external audio device (e.g., smartphone, MP3 player) to play audio through the MX-BCD100 speakers.

  1. Connect one end of a 3.5mm audio cable (not included) to the headphone jack or audio output of your external device.
  2. Connect the other end of the 3.5mm audio cable to the AUX Input Jack on the MX-BCD100.
  3. Set the Function Selector to 'AUX'.
  4. Start playback on your external device.
  5. Adjust the volume using the VOL knob on the MX-BCD100 and/or your external device.

7. Maintenance

7.1 Cleaning the Unit

7.2 Battery Replacement

When operating on batteries, if the sound becomes distorted or the unit stops functioning, it is time to replace the batteries. Follow the steps in Section 5.1 'Battery Operation' to replace all 6 'C' batteries with new ones.

8. Troubleshooting

If you experience issues with your Memorex MX-BCD100, refer to the following table for common problems and solutions.

ProblemPossible CauseSolution
Unit does not power on.No AC power; Dead batteries; Power switch in OFF position.Check AC adapter connection and wall outlet; Replace batteries; Ensure power switch is ON.
No sound from speakers.Volume too low; Incorrect function mode; Headphones connected (if applicable); Mute activated (if applicable).Increase volume; Select correct function (CD, AM, FM, AUX); Disconnect headphones; Check for mute function.
CD does not play or skips.CD inserted incorrectly; CD is dirty or scratched; CD compartment not closed; Unit in wrong mode.Reinsert CD with label side up; Clean or replace CD; Close CD compartment firmly; Set Function Selector to 'CD'.
Poor radio reception.Antenna not extended/positioned correctly; Weak signal area.Fully extend and adjust the telescopic antenna (FM); Rotate the unit for best AM reception; Try moving the unit to a different location.
AUX input not working.Incorrect function mode; Audio cable not connected properly; External device volume too low.Set Function Selector to 'AUX'; Ensure 3.5mm cable is fully inserted; Increase volume on external device.

9. Specifications

10. Support

For further assistance or inquiries regarding your Memorex MX-BCD100, please refer to the contact information provided with your purchase or visit the official Memorex website for support resources.

Related Documents - MX-BCD100

Preview Memorex MX-MCD200 Top Loading Bluetooth CD Player & FM Radio Operation Manual
This operation manual provides comprehensive instructions for the Memorex MX-MCD200 Top Loading Bluetooth CD Player & FM Radio. It covers setup, daily operation, safety precautions, care and maintenance, troubleshooting, and technical specifications for optimal use of the device.
Preview Memorex MP3441 Bluetooth CD Boombox Instruction Manual
Comprehensive instruction manual for the Memorex MP3441 Bluetooth CD Boombox, covering setup, operation, maintenance, troubleshooting, and technical specifications.
Preview Memorex 2Xtreme MP3830-01 Outer Case Replacement Guide
Step-by-step guide on how to replace the outer case of the Memorex 2Xtreme MP3830-01 boombox, including tools and disassembly instructions.
Preview Memorex MD6886 Portable CD Player Operating Instructions Manual
Operating instructions and safety precautions for the Memorex MD6886 Personal AM/FM Stereo/Compact Disc Player with 45-second digital anti-shock protection. Learn how to use radio, CD playback, and maintenance.
Preview Memorex Mi3X Minimove Speakers Replacement Guide
Step-by-step instructions for replacing the speakers in a Memorex Mi3X Minimove boombox. This guide covers disassembly, component removal, and reassembly, requiring basic tools and soldering skills.
Preview Memorex MP3122 Portable CD Player with AM/FM Radio and Cassette Recorder - Operating Instructions
Comprehensive operating instructions and troubleshooting guide for the Memorex MP3122 portable CD player, AM/FM stereo radio, and cassette recorder. Learn how to use all features, care for your device, and resolve common issues.