NovelGoal Neck Strap Shoulder Lanyard User Manual

Introduction

This manual provides essential information for the proper use and maintenance of your NovelGoal Neck Strap Shoulder Lanyard. Designed for the MAVC 3 Pro Remote Controller, this accessory allows for hands-free operation and secure carrying of your remote, enhancing convenience during drone operation.

Product Overview

The NovelGoal Neck Strap is a durable and adjustable lanyard featuring high-strength metal hooks for secure attachment to your remote controller. Its design prioritizes comfort and reliability.

Overall view of the NovelGoal Neck Strap Shoulder Lanyard, showcasing its full length and double hook design.

Detailed view of one of the high-strength metal hooks, designed for secure attachment.

Illustration highlighting the smooth and soft fabric of the lanyard, designed for comfortable wear.

Image demonstrating the sturdy construction of the lanyard, capable of bearing the weight of a remote controller without breaking.

Key Features:

• Adjustable Length: The lanyard features a free adjustable buckle, allowing length customization from 34cm to 59cm.
• Durable Construction: Made with a strong rope body and high-strength metal hooks for reliability.
• Comfortable Material: Silky, breathable fabric ensures comfort during extended use.
• Double Hook Design: Provides balanced support and stability for the remote controller.

Setup

Follow these steps to properly attach the neck strap to your MAVC 3 Pro Remote Controller:

1. Identify Attachment Points: Locate the two attachment points on your MAVC 3 Pro Remote Controller. These are typically small loops or holes designed for lanyards.
2. Attach Hooks: Open the metal hooks on each end of the NovelGoal neck strap. Carefully attach one hook to each designated attachment point on the remote controller. Ensure the hooks are fully closed and secure.
3. Verify Security: Gently tug on the strap to confirm that both hooks are firmly attached and will not detach during use.

Visual guide demonstrating how to attach the double hook lanyard to a remote controller.

Close-up of the high-strength metal hook, illustrating its durable construction and 360-degree rotation capability for flexible attachment.

Operating

Once the neck strap is securely attached to your remote controller, you can begin using it:

1. Wear the Lanyard: Place the neck strap around your neck, ensuring the remote controller hangs comfortably in front of you.
2. Adjust Length: Use the adjustable buckle to customize the length of the lanyard. Slide the buckle up or down until the remote controller rests at a comfortable and accessible height for operation.
3. Hands-Free Use: The lanyard allows you to operate your drone with both hands on the controller, or to temporarily release the controller without dropping it.

Image showing a user adjusting the length of the lanyard using the free adjustment buckle for optimal comfort.

Maintenance

To ensure the longevity and cleanliness of your NovelGoal Neck Strap, follow these maintenance guidelines:

• Cleaning: The fabric part of the lanyard can be machine washed. Use a gentle cycle with cold water and mild detergent.
• Drying: Air dry the lanyard completely before re-attaching it to your remote controller. Avoid direct sunlight or high heat, which may damage the fabric or metal components.
• Inspection: Periodically inspect the fabric for any signs of wear, fraying, or damage. Check the metal hooks for any deformation or signs of corrosion. Discontinue use if significant damage is observed.

Troubleshooting

This section addresses common concerns you might encounter with your neck strap.

Specifications

Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the seller or manufacturer directly. Contact details can typically be found on your purchase receipt or the product packaging.